Question about Philips Magnavox MWR10D6 DVD Recorder
I want to connect HDTV to DVD/Recorder so I can record TV movies.
Unfortunately, the Magnavox MWR10D6 recorder can not record HD signals. It's only video inputs are coax (RF) and composite video; both are limited to 480i (SD). NTSC (analog signals) are translated to video.
Your best recording option is to connect the composite video output of the Dish receiver to the video input (yellow for video, red and white for audio) of the recorder. Then set the receiver to the channel that you want to record and set the recorder to Line In.
HD recorders may exist. They are much more expensive than the SD versions.
I wish that I had better news for you. The manual for the MWR10D6 is available from Funai here: http://www.funai-corp.com/support/om/MWR10D6.pdf .
Posted on Apr 18, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: WHEN I RECORD A DVD.
Sometimes DVD players cannot read a DVD+R disc, only DVD-R can be played. (or vice versa) For example my old XBOX cannot play DVD+R, but it will read a DVD-R just fine.
So if you have finalized your disc and it still won't play on a certian player, try the other type of disc. (DVD+R or DVD-R)
Posted on Jan 05, 2008
I am unfamiliar with this unit.
If you have scart connecters on both, connect av2 on the tv to av in on the recorder. set the recorder to record from av source.
You should now record a program, I think the static is the fact that composite is out from the dvd only, not an input, and in on the tv, not an output.
Posted on Sep 04, 2009
Testimonial: "though unfamiliar with unit, pob-h tried to help solve my problem! that's more than i can say about my own husband! thanks for trying!"
SOURCE: I have two questions on
How old is your remote? The available codes programmed into the remote are for products that were on the market for at least 6 months before the remote was built. Newer codes can't be added except for the programmable remotes. However, I've found these codes for Magnovox DVD units 626, 661 and the following for Philips 640, 641, 766 with DISH remotes.
You need either composite or component video cables (or S-video cable depending on the TV). Composite video uses 3 RCA jacks (1 yellow for video, red/white for audio); component video cables have three jacks just for the video and a separate 2 jack cable for the audio. S-video is very similar to the Composite video. The coax out is a pass through. It lets the TV signal (from the satellite receiver or OTA) go to the TV tuner. The dvd picture will be be best on component video.
I hope this helps.
(the composite video is labeled Video Out, the component video is labeled Component video out; both are just a bit left of the Coax digital audio out (near the center of the unit))
Posted on Sep 10, 2010
Check to see if the dvd format or brad they were recorded on is compatible for playback on your console. Check the manufacturers website for details.
Posted on Sep 18, 2011
Tips for a great answer:
Jan 03, 2011 | Philips Magnavox MWR20V6 DVD Recorder/VCR
Oct 17, 2010 | Televison & Video
Oct 21, 2009 | Televison & Video
Sep 16, 2009 | Sanyo DS31590 31" TV
Sep 04, 2009 | Philips Magnavox MWR10D6 DVD Recorder
Mar 24, 2009 | Philips Magnavox MWR10D6 DVD Recorder
Dec 29, 2007 | Philips Magnavox MWR10D6 DVD Recorder
181 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: