Question about Whirlpool Refrigerators

Open Question

GSS30C6EYY empty ice 3 days later still no ice. no kinks, still water flow

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 35 Answers

SOURCE: water dispenser doesn't work

Try replacing the water valve.

Posted on Dec 09, 2007

  • 210 Answers

SOURCE: Ice Maker

Put the ice maker through a test mode. Press and hold the sizing button for 5 seconds or so and it should go through a complete cycle. Quite possibly the arm has gotten stuck and this may free it up.

Sgt 48

Posted on Jun 01, 2008

  • 33 Answers

SOURCE: Amana Side-by-Side Fridge Model SBD21VPSE

If there is a reset button on your ice maker try pushing it. Many ice makers have two holes for reset. A general rule of thumb is if the ice maker fingers are stopped in a slightly vertical position then your ice maker unit is working. If the fingers are stopped anywhere else then it needs some sort of attention or replaced. Make sure there is water, or ice in the ice maker tray, if not then the problem is with water supply.

Posted on Nov 29, 2008

tborn6
  • 700 Answers

SOURCE: Ice maker isn't making ice...

there appears to be a problem with 1. the temperature needs to be turned down to produce Ice. also is the fill tube frozen where the water goes into the ice maker sometime you have to thaw it to get the ice out of it and the reset the maker too. Let me know if this helped and if it did not don't rate and ask another question from me and I'll be galad to help. If it did would you please rate this solution please. Thanks for using FixYa.

Posted on Jan 01, 2009

  • 1 Answer

SOURCE: water dispenser not working

how do you replace the filter? JerilynnC

Posted on Feb 23, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The drip pan is filling up with water and then over flowing. We have to empty it once a day. Then I noticed the ice maker has stopped making ice. Any ideas?


Turn icemaker off see if water problem stops ice tray water valve may be overflowing tray cycle timer may be faulty or faulty water control valve.

Jul 31, 2015 | Whirlpool Refrigerators

1 Answer

Ice maker not working.


If your water tray was empty check the water supply to the fridge .
you shouldn't fill it manually.
\if the water supply is turned on, then the operating solenoid that allows water into the tray is faulty.
Whoever repaired your fridge should be called back immediately.

Dec 02, 2014 | Refrigerators

1 Answer

Whirlpool ice dispenser not working


It could be clogged. Without more info its rather hard to answer. Depending on where you water comes in, the line could be kinked or it could be loose. If no water leaking probably not loose. More commonly the line going from refrigerator to water coming into it is kinked or the line is clogged. Could also be clogged where ice comes out, especially if you are getting water but no ice. Then empty all the ice from the holding box, then clean any ice off that has built up around the ice lever area. Hope this help, Anthony

Jun 11, 2013 | Refrigerators

1 Answer

How to make the ice maker work


Problems with Ice Maker/Water Dispenser
If you are not getting ice, make sure the water valve is open and the ice shutoff switch or arm is not in the "Off"
position. Inspect the ice ejector arm for blockage and remove any trapped ice with a plastic spoon. If you recently
emptied the ice container, remember that it takes your refrigerator up to 24 hours to produce ice.
Low water pressure is the major cause of problems with the water/ice door dispenser. Low water pressure can cause
inadequate water flow and small or hollow ice cubes. Check the water line for kinks that may interfere with water
flow and make sure the water valve is open. A dirty water filter can color the water and ice cubes, impede water
flow or cause water to have an off taste so remove, clean and replace it.
If water is leaking from the door dispenser, make sure the water glass remains under the spout until the water
shuts off completely. If you recently changed the water filter, air that was left in the line may cause water to
spurt from the dispenser. To flush the water line, let water run from the dispenser for approximately three minutes
or until you draw out 1.5 gallons of water. Try to find a container that will fit under the dispenser spout so you
do not have to start and stop to empty the container.

Have a nice day my friend : )

Sep 04, 2011 | Kenmore Side by Side Refrigerator

1 Answer

For the past month the ice maker is not dispensing ice cubes. The water supply valve is turned on, there is no kinks in the water source line and the ice maker is turned on. I ran out of ideas. Do you have...


Hi

The water tube that supplies water to the ice maker is possibly frozen up.

The way to check this is to empty all food out of both sections and store alsewhere, then turn off and unplug the unit. Wait for 24 to 36 hours with the doors partially open to allow all the ice to melt.

Change the water filter and plug in and switch on.

Run off around a gallon of water to prime the system. You should then get chilled water around 4 hours later and ice after 12 hours.

If there is still no ice you may find that the trace heater on the ice maker water tube is faulty and may need to be replaced

Regards

Gordon

Apr 24, 2011 | Refrigerators

1 Answer

Automatic ice maker won't make ice


Turn off water.
Disconnect the line after the filter.
Turn water back on. If there is no water flowing, replace the filter.
If there is water flowing, the feed valve is probably defective.

Aug 02, 2009 | Kenmore Refrigerators

1 Answer

HAVE WATER FLOW FOR DRINKING/BUT NO ICE MAKING GOING ON


is not the filter because you are getting water from the 1 icemaker or the water valve

Apr 07, 2009 | Refrigerators

1 Answer

Monogram water flow problem


common low flow is a kinked line or a bad water valve, the solioid valve has a filter that may be dirty. then go from there

Jun 11, 2008 | GE Monogram ZISS480DRSS Stainless Steel

1 Answer

Side by side refrigerator


The ice maker is not producing ice or not enough ice

 Refrigerator connected to a water supply and the supply
shutoff valve turned on?
Connect refrigerator to water
supply and turn water shutoff valve fully open.
 Kink in the water source line? A kink in the line can reduce
water flow. Straighten the water source line.
 Ice maker turned on? Make sure wire shutoff arm or switch
(depending on model) is in the ON position.
 New installation? Wait 24 hours after ice maker installation
for ice production to begin. Wait 72 hours for full ice
production.
 Large amount of ice recently removed? Allow 24 hours for
ice maker to produce more ice.
 Ice cube jammed in the ice maker ejector arm?
Remove ice from the ejector arm with a plastic utensil.
 Reverse osmosis water filtration system connected to
your cold water supply?
This can decrease water pressure

OR
The water dispenser will not operate properly

 Freezer door closed completely? Close the door firmly. If it
does not close completely, see “The doors will not close
completely.”
 Refrigerator connected to a water supply and the supply
shutoff valve turned on?
Connect refrigerator to water
supply and turn water shutoff valve fully open.
 Is the water pressure at least 30 psi? The water pressure to
the home determines the flow from the dispenser. See “Water
Supply Requirements.”
 Kink in the home water source line? Straighten the water
source line.
 New installation? Flush and fill the water system.
 Water filter installed on the refrigerator? The filter may be
clogged or incorrectly installed.
 Is a reverse osmosis water filtration system connected to
your cold water supply?

GOOD LUCK TO YOU!!! LET ME KNOW IF THIS SOLVED YOUR PROBLEM

Jan 31, 2008 | Whirlpool ED2FHEXN Side by Side...

Not finding what you are looking for?
Refrigerators Logo

Related Topics:

61 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Refrigerators Experts

John Tripp
John Tripp

Level 3 Expert

4654 Answers

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Steve

Level 3 Expert

3287 Answers

Are you a Whirlpool Refrigerator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...