Question about AEG 24 in. Favorit 60830 Free-standing Dishwasher

Open Question

Error message20 on AEG favorit 60870 dishwasher

Where is and was is siphon

Posted by on

3 Suggested Answers

  • 1 Answer

SOURCE: error code 30

i fixed the problem by tipping the machine over slightly, as suggested by other members, about a pint of water came out the bottom and it now seems to work perfectly.

Posted on Mar 28, 2008

joe_lishman
  • 192 Answers

SOURCE: Hi, I have an aeg 60870 dishwasher showing error

Sounds like the Anti-Flood system activated (polystireen float at base of machiene coupled to a micro switch) the purpose of this system is to put the drain pump on and stops any other function on the machiene. The anti lood system activates when any amount of water appears on the bottom (caused by leaky pipe / blokked pipes / spills etc.) . Dry the water and rectify the leak. This should solve the problem.

Posted on Jan 19, 2010

  • 1 Answer

SOURCE: My AEG dishwasher - Favorit no. 60870 sensorlogic

I don't have the answer - but mine has been doing this too. There's now a metalic/electical smell that has me worried so I've resorted to a basin of water and fairy liquid! Did you solve your problem?

Posted on Jan 24, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Type 60870 not heating water!Have a wiring giagram for trouble shooting?


Could be: faulty power board (completly or only relay for heating element), faulty wiring between heating element and power board, faulty heating element (interruption, short circuit or current leakage,on some heaters faulty thermal protection).

Depending on the model, the display shows the i60 fault code or the LED end of the program will flash 6 times (only model without display).

Dado

Mar 17, 2015 | AEG 24 in. Favorit 60870M Free-standing...

1 Answer

Aeg 60870 dishwasher water not getting in. Error code.10


The most common cause of a fault "i10" is closed valve on the water supply line. So this failure indicates a problem with filling of water.
Possible error causes:
Closed water tap, Inlet valve faulty, inlet hose bent, softener system clogged, pressure switch or pressure switch hose obstructed or leaking, wiring from pressure switch to printed circuit board (PCB), wiring from inlet valve to PCB and finally PCB.

Dado

Oct 04, 2014 | AEG Dishwashers

1 Answer

Aeg 60870 dishwasher water not getting in


The most common cause of a fault "i10" is closed valve on the water supply line. So this failure indicates a problem with filling of water.
Possible error causes:
Closed water tap, Inlet valve faulty, inlet hose bent, softener system clogged, pressure switch or pressure switch hose obstructed or leaking, wiring from pressure switch to printed circuit board (PCB), wiring from inlet valve to PCB and finally PCB.

Dado

Oct 04, 2014 | AEG 24 in. Favorit 60870M Free-standing...

1 Answer

AEG Favorit 60870 Dishwasher not starting


Matthew, in most cases when a circuit board repeats the same action over and over, there was a short and loss of communication with associated controllers. Obviously you have power to the control unit, so that means the instructions from the controller to the solenoids is lacking. You are correct in assuming the board needs replacement, however you must determine is the cost for replacement is worth the time and effort. An old machine means one repair after the other. If its relatively new; then it may be worth it.

Mar 10, 2014 | AEG 24 in. Favorit 60870M Free-standing...

1 Answer

Hi, I have an aeg 60870 dishwasher showing error code 30 and the pump is going all the time, even when you open the door, any suggestions of things i could try please?


Sounds like the Anti-Flood system activated (polystireen float at base of machiene coupled to a micro switch) the purpose of this system is to put the drain pump on and stops any other function on the machiene. The anti lood system activates when any amount of water appears on the bottom (caused by leaky pipe / blokked pipes / spills etc.) . Dry the water and rectify the leak. This should solve the problem.

Dec 21, 2009 | AEG 24 in. Favorit 60870M Free-standing...

1 Answer

AEG OKO FAVORIT 6050 trips earth leakge


This is typical of a water leak onto electrical connection OR the electrical element has shorted internaly . Check this with a Ohm meter and itshould show the problem

Dec 20, 2009 | AEG 24 in. Favorit 60830 Free-standing...

1 Answer

My AEG dishwasher - Favorit no. 60870 sensorlogic - is making a strange noise when on - what should I do?


I don't have the answer - but mine has been doing this too. There's now a metalic/electical smell that has me worried so I've resorted to a basin of water and fairy liquid! Did you solve your problem?

Nov 09, 2009 | AEG 24 in. Favorit 60870M Free-standing...

1 Answer

Error code 30


i fixed the problem by tipping the machine over slightly, as suggested by other members, about a pint of water came out the bottom and it now seems to work perfectly.

Mar 27, 2008 | AEG 24 in. Favorit 60870M Free-standing...

1 Answer

Dishwasher fail on C3 (leak prevention system)


http://www.kunnig-elektro.de/reparatur/spuelen/aeg/zulauf2.html

in German ... anyway a couple of pictures :)

Dec 15, 2007 | AEG 24 in. Favorit 50730W Free-standing...

Not finding what you are looking for?
AEG 24 in. Favorit 60830 Free-standing Dishwasher Logo

Related Topics:

114 people viewed this question

Ask a Question

Usually answered in minutes!

Top AEG Dishwashers Experts

paulcarew

Level 3 Expert

2404 Answers

Mike

Level 3 Expert

4336 Answers

Kolbrun...

Level 3 Expert

1194 Answers

Are you an AEG Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...