Television malfunction blank screen @ bottom it says ''please wait''. no picture ILO television

The picture height to your TV is too high. Check whether Zoom action is On or not. If it is ON, make it OFF.

Hello, I need more information to focus on the problem. When a malfunction occurs, whether you get any indication on the screen while pressing the menu button on the remote control. Is the voice remains in issue. What happens with the waiting lights.

change your inverter board

Hello dacrewof6,

This sounds like your vertical section is malfunctioning. This can be caused by the vertical drive section which connects to the yoke transformers of your CRTs. I would suggest taking the set to a qualified repair shop and having them check the vertical section of the TV.

I hope this helps

Thank you,

Shuttle83

bulb burned out

From some of the forum threads I've read about this, it seems like there were early issues due to bad firmware, but they have all be resolved with the recent updates. It also appears to be very easy to replace the hard drive. Just swap it out, format from the menu and you are done.

u will neeed to get it updated

CHECK C2C52 10 UFD @ 50 V OFF THE BASE OF Q2C51 ON THE SIGNAL PCB. 2. CHECK C2P05 100 UFD 16 V OFF PIN 3 OF IC2P01 AND IC2P01 PART # 270P466020 (9-VOLT REGULATOR). BOTH ARE ON THE SIGNAL PCB.

I hooked a sylvania 220sl8 dvd/cd/vcr, The vcr works, the dvd does not. Why?

Usually the blue screen is an indication that the video signal to the TV is not present. Most of the new TV's have a video input selection button on the TV and on the remote; try changing the video input selection.