Question about Creative Labs SoundWorks SW320 Computer Speakers
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Remote Control Repair
Open up your controller and look for 4 Wire! Green, light green, blue and yellow! Green and yellow is for power i guest! Light green and blue is for bass. 4 together max everything!
Posted on Feb 16, 2009
This sounds like an electrical problem in the speaker circuitry - between the speaker(s) and the control knob.
Posted on Jun 02, 2009
generally this is due to ground problem, signal gnd and power gnd need to be separate (i faced the same problem even i dint do anything from hardware side .. don ask me hw it happned).. open the volume controller u will find a small PCB (printed circuit board) with volume control ,LED and a connector. see at the back side of the voume control u will see five pins starting from right side short 1st and fourth pin. provided you connect ground of both cables which goes inside the volume controller.. it works for me.. you may experiment as i did...
Posted on Jun 06, 2009
Creative used to sell the replacement volume controls on there site but I guess they stopped selling them.
So what I would do is select your product at http://support.creative.com/
Then click on Contact Us
Next click on My problem is not listed
This will get you to email support. Send them an email stating that you need a replacement volume control and powersupply. They will ether refer you to Customer Service or to the RMA department to get a replacement.
Let me know if you have any more problems or questions
Posted on Mar 31, 2010
SOURCE: I've got Creative Inspire M2600
Does it come back after your done adjusting? Or do your have to do something else to get it back? If its just during adjustment then its probably the design of the speakers.
Posted on Jan 05, 2011
Tips for a great answer:
Oct 17, 2012 | Creative Labs INSPIRE 2.1 Computer...
May 04, 2012 | Creative Labs Inspire P5800 Computer...
Jul 30, 2011 | Creative Labs INSPIRE 2.1 Computer...
May 31, 2011 | Creative Labs i-Trigue 3400 Computer...
Jun 22, 2010 | Creative Labs Creative Black SBS350 2.1...
Sep 30, 2009 | Creative Labs Inspire 4400 Computer...
Sep 21, 2009 | Creative Labs Inspire T5400 Computer...
Jun 02, 2009 | Audio Players & Recorders
Feb 29, 2008 | Creative Labs Inspire 6600 Computer...
Jan 17, 2008 | Creative Labs Inspire T2900 Computer...
260 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: