Question about Pioneer Audio Players & Recorders

Open Question

Pl-88 pioneer turntable is not working

The automatic door is not opening

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Pioneer PL-570 turntable (c.1973)

pioneer PL 570  tone arm drops and turntable shuts off,  what gives?

Posted on Jan 16, 2009

petraman7
  • 1175 Answers

SOURCE: PL-88FS with modern HDMI Receiver

Hi...
If the new receiver doesnt have a specific input in back labeled "phono" , You WILL need a preamp for the phono. Then plug the preamp into the AUX or other available input

Posted on Jan 19, 2009

  • 42 Answers

SOURCE: pioneer pl 990 turntable

Lift off the platter mat, then lift off the platter from the spindle - gently.
Underneath the platter is a sub-platter around which you place the belt - it should be held there by the stretch of the belt while you turn the platter back up the right way and place it back on the spindle.
Turning the platter by hand, you should see a small pulley come into view through one of the holes in the platter. You then stretch the belt slightly so that it slides over the pulley. Take care not to twist the belt while doing this.

Posted on Jan 24, 2009

  • 1 Answer

SOURCE: Operating instructions for Onkyo PL-25F turntable

I have the same problem with mine! If i budge the arm by pushing it to the left a bit, it seems to catch. i think the motor on mine is worn out and cannot get started on its own, but with help, it will slowly move on its own to the edge of the vinyl and drop into playing position. If that doesnt work for you, you might need to clean the belt for the arm motor, or buy a new motor.

Posted on Sep 11, 2009

  • 1 Answer

SOURCE: Where to get 12 volt power supply for Pioneer PL-203AZ Turntable?

+ is on center pin, and the current consumption is low, not more than 200mA. A 12V wall-wart will do fine.

Posted on Dec 23, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Pioneer pl a45d


Hi Javier,

How to change the belt? how to replace belt on pioneer pl x300 pioneer pl x50 turntable .



A place to find the belt. Pioneer PL A45 PL A45D Realistic LAB 1500 TURNTABLE BELT T245


Manual with schematics. Sign up and free. Pioneer PL A45 Manual 2 Speed Belt Drive Turntable Vinyl Engine

How to set it up after you put the belt on.
How to set up Turntable cartridge alignment overhang VTA VTF vibration...

Another look on how to change a belt on a turntable? How to Replace Turntable Belt on Belt Drive Turntable


It is straight forward. Patience. Fare. Well.


May 16, 2014 | Pioneer Audio Players & Recorders

1 Answer

Need dust cover for pioneer pl-990 turntable


The only place to order one, is at Pioneer USA, as they have no distributors. It may or may not be available at this time. For more information, please visit my website at audioserviceclinic.com. Thank you.

Mar 19, 2013 | Pioneer PL-990 Turntable

1 Answer

Re. pioneer pl 990 turntable can the lid be closed


No you cannot play while lid is closed and YES you need an amp/receiver amp

Feb 28, 2011 | Pioneer PL-990 Turntable

1 Answer

My Pioneer PL-112D turntable has a broken drivebelt, is it possible to buy a new one, and is there a diagram showing the belt "routing". Thanks.


I don't believe this belt is being provided by the Pioneer. So I did find another option at a reasonable price on E-bay.

http://cgi.ebay.com.sg/TURNTABLE-DRIVE-BELT-FITS-PIONEER-PL-12D-PL-112D-/290432607483

Jan 17, 2011 | Pioneer Audio Players & Recorders

1 Answer

Converting a turntable from automatic to manual


I suppose the only way to do it would be to stop it functioning completely. The only way would be to dissasemble the auto function. What you would need to do is work out which parts are essential for the turntable operation and which only activate the return. So you need to whatch the mechanism working. You will need to remove the base and look at from underneath, just like going underneath a car!
I can't say for certain if you can do it, only you will be able to determine it can be removed without affecting the operation of the entire turntable.

May 21, 2010 | Pioneer PL-990 Turntable

1 Answer

I need to reattach the belt under the table


Download the manual free at http://www.nodevice.com/user_manual/pioneer/other_home_component/pl-990.html
There are instructions there and pictures showing how to attach the belt.

May 21, 2009 | Pioneer PL-990 Turntable

3 Answers

Motor for pioneer Pl 120 turntable


There are only three possibilities:
1) Find a scrap unit somewhere and salvage the motor.
2) Find an old Pioneer dealer that still has old stock lying around.
3) Get lucky and find one on Ebay.

Dan

Mar 28, 2008 | Audio Players & Recorders

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

73 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pioneer Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5056 Answers

John
John

Level 2 Expert

509 Answers

T-Comtech Repairs
T-Comtech Repairs

Level 2 Expert

417 Answers

Are you a Pioneer Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...