Question about Garden

Open Question

NuPower chainsaw parts diagrams

Having problems with pull start

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

dontbother10
  • 2220 Answers

SOURCE: Chainsaw pull cord wont tension up

Its almost certainly made by Poulan.
This may help you find an IPL at Sears, they are available:
http://www.searspartsdirect.com/partsdirect/modelHelp.pd?modelNumberId=29
This lists all Poulans. It will be difficult to find your saw but it is here:
Poulan.com
http://www.ordertree.com/modelinfo/POULAN-WEED-EATER/75.59.html
It sounds as though the starter spring is broken.
This thread explains how to reinstall the spring.
http://www.fixya.com/support/t1839024-broken_recoil_spring
The IPL for your saw shows all the parts and provides an idea of how they fit together. GL
Lou

Posted on Sep 08, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why is my 14 &20 chainsaw Model 8901/8902 having difficulty pulling cord. It seems to lock. What could be the problem?


if it runs ok after you get it started it could be the starter pulley. the blue max saws have that problem

Feb 10, 2015 | BLUE MAX 2-in-1 - 14"/20" Combination...

2 Answers

I purchased a 14" &20" chainsaw Model 8901/8902 and I am having difficulty pulling cord. It seems to lock. What could be the problem?


That is a good and bad sign. When a motor wears out and looses compression it gets very easy to pull. New motors should pull hard and be choppy or seem to "lock" however - you *MUST* carefully review your fuel mixture to ensure you are adding enough oil to the mix - if you used straight gas without adding oil you will burn the motor up and experience difficult pulling. Simple test - remove the spark plug - give it a good pull it should be liquid smooth with no binding anywhere on the pull. Report your results.

Feb 10, 2015 | Garden

1 Answer

I have a 3hp briggs & stratton//the pull rope pulls freely//it does not engage the engine and turn the engine over


You probably need to replace the starter recoil. This is not a very expensive fix. Just be aware that this problem is usually caused by having to pull the starter rope excessively because of some other starting problem. Once you replace the recoil, keep your engine running properly.

Sep 07, 2014 | Garden

1 Answer

Mini quadard 49cc model atv-2 pull start problem


a lot of guys are having issues with these machines. Most I believe are due to the carb settings. Turn the set screw all the way in and back it out 1 1/4 turns. Try that. if you need more you do it in 1/4 turn increments

Dec 24, 2013 | Quad 47 cc / 49 cc Pocket Mini Bike...

1 Answer

Traxxas Monster truck won't start


i always gave mine half throttle for 2 pulls, attatched the glow plug batt, and bam, started right off next pull

Feb 25, 2013 | Traxxas T Maxx 3.3 Monster Truck

1 Answer

I have Craftsman 42" lawn tractor with the automatic transmission. It runs fine but it is not pulling a grade now. The belt seems tight, what could be the problem?


As you attempt the incline grab the clutch pedal with your heel and pull it towards you if it starts pulling correctly you have a belt problem . If it makes no difference you are having hydro pump problems

Jul 10, 2010 | Craftsman 17.5 hp 42 in. Deck Lawn Tractor...

1 Answer

My 1984 rx7 starts when choke is pulled out. WHen


Your carberater is having problems getting the correct amount of fuel.Either a line or fuel filter is clogged or you need to have your carb. rebuilt.

Apr 26, 2010 | 1983 Mazda RX-7

1 Answer

Engine will turn over, won't fire


There are only 2 things to make it fire: having fuel and having spark. Pull out one plug and have a helper to start the engine while you hold the spark plug touching the engine chassis to see if it sparks. If there is then open the air filter to put some of fuel in tho start. It if is starts then you know what the problem is. No spark, look for problem at the ignition coil , rotor and distributor cap. No fuel , look for problem the fuel pump relay behind the battery. Good luck.

Mar 08, 2010 | 1989 Mercedes-Benz 190

1 Answer

Craftsman 2cyl leaf blower wii not start


it sounds like vapor lock, trying giving it a couple pulls with the spark plug taken out

Nov 13, 2008 | Craftsman 4 Cycle Blower/Vac

Not finding what you are looking for?
Garden Logo

Related Topics:

387 people viewed this question

Ask a Question

Usually answered in minutes!

Top Garden Experts

Dennis Key
Dennis Key

Level 3 Expert

2475 Answers

john h

Level 3 Expert

11064 Answers

yadayada
yadayada

Level 3 Expert

75077 Answers

Are you a Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...