Jetway MB HA06-GT, Seagate SATA, AMD Athlon 64X2 5800, 4GB Kingston RAM, Windows XP
Not all the time, but sometimes PC freezes just after post and all I get is a black/gray screen. I have to hit the reset button and then Windows will load. After Windows loads, everything works fine.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
If you have installed an existing hard drive that has Windows already installed on it into the new motherboard then you need to re-install Windows because the existing drivers on the hard disk will not match the drivers required on the new motherboard.
a custom built computer check every connection a computer needs current and data to travel up to and through every device for a computer to work properly
check the cmos battery make sure the seat is cleam this will apply to the ram as well make sure the sockets are clean and they are seated securely
what sort of ide connections are they do you mean molex power connections?
make sure the leads from motherboard to hard drive sata and electrical are securely seated also check all of the connections to drives cd/dvd floppy and usb
hope this helps
Easy problem to solve my freind:)
Do like this, start the installation as you did before, when your pc restarts, get in to bios again and change the first boot from cd/dvd to the HDD. That will solve your instalation problem:)
Good luck to you
Please take a moment and rate my help for you
If you had APM or no power management activated, you will need to reinstall windows after turning on ACPI to load the new ACPI HAL and to detect the hardware again. Otherwise windows will be confused about the type of PC it's installed on.
Design ATX form factor 4 layers PCB size: 30.5x24.4cm
Chipset VIA KT266A/VT8233A Chipset
CPU Socket Support AMD Athlon 700MHz∼1.4GHz processor
Support AMD Athlon XP 1500+ 2600+ processor
Support AMD Duron 600MHz 1.3GHz processor
Support 200MHz/266MHz (Double Data Rate) Front Side
Bus frequency processors
Reserves support for future AMD processors
2600+ is the highest it will go.
http://www.machspeed.com/manuals/VIPER/V266B.pdf page 3