Question about Garmin StreetPilot i3 GPS Receiver

1 Answer

System Down my system has a blank page with a dot that moves but i cant see m fetures i think i press th factory reset boton. How can i get my system running again please

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 6,784 Answers

Ok, you may have to reset this device by taking out all batteries if any and disconnecting it from any external power sources. let stand without any batteries or power cord for 5 min. after five minutes put batteries back in or plug it back into the external power source. if the device is still malfunctioning, you will have to clear all data. it may have a data overload and this will cause this blank screen with the dot. Follow this procedure if taking out the batteries and unplugging it for five minutes didn't help.

Press and hold all buttons in the following order: The arrow button that faces left, press that and hold while you press the wheel and power button. hold all three buttons till you see a prompt that will say, "Do you really want to erase all your user data?" select yes. at this point the device will start to work like. normal.

Posted on Mar 11, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Want to erase password and start over


n order to reset to factory settings, please follow these instructions :
- Power off machine.
- Hold down + first and then POWER for about 10 seconds, release both buttons once Kurio screen loads .
- When you get the open Android picture, press + to enter menu, use - to move down to "wipe data / factory reset" and press POWER again to choose.
- Next press - to choose "YES" and press POWER to start reset.
- Check for yellow text Formatting /data, formatting cache, Data wipe complete.
- Choose reboot system now and press POWER to complete process.
NOTE: This will erase data from your Kurio's internal storage such as Accounts, System settings and Downloaded apps. But music, pictures, and other user data won't be erased. Check "Erase SD card" if you want to clear all the data of the system.
It is also possible to reset only the Kurio Interface: Go to Parental area > Tablet Setup> Press "Reset the Interface to Factory Default Settings".
Once this has been done you will need to set the device up and perform all the updates, instructions for this are on this page.

Mar 04, 2015 | Kurio 7S Tablet

2 Answers

There are no instructions on how to reset my grandsons kurio7s tablet


check out http://www.kurioworld.com/k/us/parents/support/7/gettingstarted
Kurio7s
In order to reset to factory settings, please follow these instructions :
- Power off machine.
- Hold down + first and then POWER for about 10 seconds, release both buttons once Kurio screen loads .
- When you get the open Android picture, press + to enter menu, use - to move down to "wipe data / factory reset" and press POWER again to choose.
- Next press - to choose "YES" and press POWER to start reset.
- Check for yellow text Formatting /data, formatting cache, Data wipe complete.
- Choose reboot system now and press POWER to complete process.
NOTE: This will erase data from your Kurio's internal storage such as Accounts, System settings and Downloaded apps. But music, pictures, and other user data won't be erased. Check "Erase SD card" if you want to clear all the data of the system.
It is also possible to reset only the Kurio Interface: Go to Parental area > Tablet Setup> Press "Reset the Interface to Factory Default Settings".
Once this has been done you will need to set the device up and perform all the updates, instructions for this are on this page.
Please feel free to contact Kurio Technical Support on our support page.




Oct 22, 2014 | Tablets & eReaders

1 Answer

Someome put the lock on when you turn it on and can't get in, it has the time and 9 dots how do I get past this


You will need to do a factory reset:
- Power off machine.
- Hold down + first and then POWER for about 10 seconds, release both buttons once Kurio screen loads .
- When you get the open Android picture, press + to enter menu, use - to move down to "wipe data / factory reset" and press POWER again to choose.
- Next press - to choose "YES" and press POWER to start reset.
- Check for yellow text Formatting /data, formatting cache, Data wipe complete.
- Choose reboot system now and press POWER to complete process.

Oct 21, 2013 | Techno Source Kurio Kids Tablet With...

1 Answer

I forgot my password and hint question for kurio 7 how do I reset factory setttings


In order to reset to factory settings, please follow these instructions :
- Power off machine.
- Hold down + first and then POWER for about 10 seconds, release both buttons once Kurio screen loads .
- When you get the open Android picture, press + to enter menu, use - to move down to "wipe data / factory reset" and press POWER again to choose.
- Next press - to choose "YES" and press POWER to start reset.
- Check for yellow text Formatting /data, formatting cache, Data wipe complete.
- Choose reboot system now and press POWER to complete process.
NOTE: This will erase data from your Kurio's internal storage such as Accounts, System settings and Downloaded apps. But music, pictures, and other user data won't be erased. Check "Erase SD card" if you want to clear all the data of the system.
It is also possible to reset only the Kurio Interface: Go to Parental area > Tablet Setup> Press "Reset the Interface to Factory Default Settings".
Once this has been done you will need to set the device up and perform all the updates, instructions for this are on this page.

Feb 16, 2013 | Computers & Internet

1 Answer

There is a small circle with a black small dot on the inside appearing in the left top corner of my phone. What is it? How can I remove it?


Try resetting the device and check if ti would work.1.Power off the phone.2.Press and hold Vol+ key and Power key simultaneously until several blue sentences appear on the screen which are reboot system now; apply update from sdcard; wipe data/factory reset; wipe cache partition.3.Use Vol+ key and Vol- key to move the cursor to "wipe data/factory reset" and press camera key to confirm it.4.There are many words "No" and one sentence "Yes -- delete all user data". Use Vol+ key and Vol- key to move the cursor to "Yes -- delete all user data". Press camera key to confim it.5.The phone will finish the reseting by itselft after about 10 seconds later and then the cursor will be on "reboot system now" and press camera key to confirm it. The phone will reboot automatically.There is no unlock and password any more after the phone is on.

Jan 20, 2013 | ZTE Warp

1 Answer

Zte x500m boot problem


Reset your phone once by following instructions to solve the booting issue on the phone.
1.Power off the phone.Press and hold "Vol-", and "Power" key until the phone goes to recovery mode.
2.Press home key get into next interface.
3.There will be four choices:reboot system now;apply update from sdcard;wipe data/factory reset;wipe cache partition.
3.Use "Vol+" and "Vol-" to move the cursor up and down.
4.Move cursor to "wipe data/factory reset", press "camera" key to select it.
5. Move cursor down to "Yes - delete all user data" and press "camera" key to select it.The data will be erased.
6. The cursor will be on "reboot system now" at the end, so just press "camera" key to reboot the phone normally.
(It will take a long time to reset the phone after press the "reboot system now".so please be patient)

Dec 20, 2012 | ZTE Score

1 Answer

How to troubleshoot galaxy young


hi,
i think you want to ask if how to hard reset your galaxy young...just do this procedure ...

1. Power off phone
2. Press and hold Home Button ( middle ) + Volume Up + power on button
3. Wait for 5 second until Android System Recovery menu appear
4. There are 4 options

reboot system now
apply update from sdcar
wipe data/factory reset
wipe cache partition


5. Move the options to " Wipe data / factory reset " using volume down ( - ) button and menu button to confirm, because the touchscreen doesn't work in reovery mode
6. After the process done, phone will reboot.

Sep 30, 2012 | Cell Phones

1 Answer

Roland VS 2480 v2 - working on album and received error message "load project please wait" since last night. have tried turning machine off and on and unplugging it. still same message.


Hi, have you tried to do a factory reset?

Hold SHIFT and press F4 (Utility). Press PAGE to get to page 3. Press F6 (PrmIni). Press F5. Press ENTER/YES.

If the factory reset does not fix the problem i think you have to format the disk because it has a fragmented disk .......

Dec 12, 2010 | Roland Vs2400CD Digital Workstation W/CD...

1 Answer

How do i perform a cold reset on a laserjet 2600n printer


Via the Control Panel: The Resets menu makes it possible to reset factory settings, disable and enable Powersave, and update the printer after new supplies are installed. Configure device menu The Configure device menu makes it possible to change the printer's default print settings, adjust the print quality, change the system's configuration and I/O options, and reset the printer's default settings RESTORE FACTORY SETTINGS :Makes it possible to clear the page buffer, remove all perishable personality data, reset the printing environment, and return all default settings to factory defaults. Press Menu or (Select) to enter the MENUS.
  1. Press (Down Arrow) to highlight Configure device menu .
  2. Press (Select) to select Configure device menu
  3. Press (down arrow) to System setup menu
  4. Press (select) System setup menu
  5. Press (select) Resets menu
  6. Select RESTORE FACTORY SETTINGS.

Dec 03, 2010 | HP LaserJet 4600dn Color Printer

3 Answers

Um do u know were the dsi reset boton is?


The Nintendo DSi and DS are having none reset buttons, use the power switch or restore the factory setting from the setting menu, read the manual also first.

Succes.

Aug 30, 2009 | Nintendo DSi Black Console

Not finding what you are looking for?
Garmin StreetPilot i3 GPS Receiver Logo

Related Topics:

50 people viewed this question

Ask a Question

Usually answered in minutes!

Top Garmin GPS Experts

SHARCNET-USA
SHARCNET-USA

Level 3 Expert

2124 Answers

yadayada
yadayada

Level 3 Expert

67800 Answers

Steve

Level 3 Expert

3287 Answers

Are you a Garmin GPS Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...