Question about RTO PasLode 900420 Impulse Framing Nailer

1 Answer

Paslode framing nailer loss of power.

My paslode framing gun will only drive 10d nail in doug fir lumber midway. Fan works when depressed, depth gauge set to max, new battery and fuel cell. Gun is cleaned on regular basis. What could be the cause for this malfunction. Need help!

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 32 Answers

Here's what I found at the Paslode Troubleshooting Site:
Tool will not cycle - fan runs, indicator light
is solid green.

Lockout bracket is stuck in lockout position.
Work-contacting element is bent, or build-up of
debris in track restricts operation.
Follower is not behind fasteners.
Fuel Cell empty.
Spark wire out of spark plug.
Spark plug is dirty.
No spark is generated.
Check lockout.

Remove and inspect lower probe. Clean and
lubricate track with Paslode Impulse® oil.
Repair or replace lower probe as required.
Position follower behind fasteners.
Replace fuel cell.
Remove cap and check spark lead, insert in
spark plug and replace cover.
Clean tool cylinder head and spark plug.

If this doesn't work, I suggest contacting Paslode directly 800-222-6990

Posted on Mar 27, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why is my gun bending nails?


Adjust the Work Contacting Element. See page 4 in the manual...
http://www.paslode.com/owners-manuals.html

Adjust the depth of drive.

Make sure correct fasteners are being used.
Use fasteners that meet Paslode specifications only.

Increase air flow to tool -- use larger air lines
(3/8 ID minimum).

Increase Air Pressure. DO NOT EXCEED 120 PSI.

Jul 23, 2014 | Paslode F350S PowerMaster Plus 30-Degree...

2 Answers

Paslode framing nailer: compressor powered, hisses but will not shoot nails, appears to be in the sliding mechanizism that touches the wood first before it will shoot, help


I've used paslode for years and whenever there was a "hiss" of air and no fire- it was o-rings- When were the o-rings changed last? And how do you know they are in 'good shape'? You can't tell by just looking at them. If that isn't the problem then I can't help. Just as an aside- do you oil the gun (down the air intake nipple) every time you use it? Lack of oil will wear out o-rings fast. Sorry if this isn't overly helpfull but most gun problems are o-ring or seal related unless you've worn out or damaged a mechanical part.

Feb 10, 2013 | Air Tools & Compressors

1 Answer

My gun wont fire. When I p, , but wonthe fan comes onss on the lumber to firet fire. John


Hi,

Here is a tip that I wrote about the Paslode nailers and the problems that can come up with them.

I also have a link to the Paslode manuals which contain Paslode cleaning and troubleshooting guides.

If you need parts for your Paslode, there also is a link for a site that sells the Paslode nailer parts.

Paslode Cordless Nailer Problems



heatman101


Jan 19, 2011 | RTO PasLode 900420 Impulse Framing Nailer

1 Answer

Hi .my im350 nail gun isnt working gas and battery ok and gun is cleaned.light on green .but when depresssed makes strange noise and lights on fire from fan end?


Hi,

Here is a tip that I wrote about the Paslode nailers and the problems that can come up with them.

I also have a link to the Paslode manuals which contain Paslode cleaning and troubleshooting guides.

If you need parts for your Paslode, there also is a link for a site that sells the Paslode nailer parts.

Paslode Cordless Nailer Problems



heatman101



././

Oct 24, 2010 | RTO PasLode 900420 Impulse Framing Nailer

1 Answer

Paslode Impulse Framing Nailer won't operate


Hi,

Here is a tip that I wrote about the Paslode nailers and the problems that can come up with them.

I also have a link to the Paslode manuals which contain Paslode cleaning and troubleshooting guides.

If you need parts for your Paslode, there also is a link for a site that sells the Paslode nailer parts.

Paslode Cordless Nailer Problems



heatman101



[\[]]\

May 10, 2010 | Omega Paslode 901000 Impulse Cordless...

1 Answer

Paslode nail gun 325 black not firing


Any time these guns become intermittent or stop firing but the fan still runs, the first the to check is the expiration date on the gas cartridges. The do expire and this will make the gun work inconsistently or not at all.

Dec 08, 2009 | RTO PasLode 900420 Impulse Framing Nailer

1 Answer

Paslode shoots a few nails and quits


try a new battery m8 when they have been used fir a while they wear out at the catch and when u fire the nail gun the battery works its way out enuf to stop it making a good contact. Hope this helps.

Aug 11, 2009 | RTO Paslode 902000 IM250 Ii Cordless 16...

Not finding what you are looking for?
RTO PasLode 900420 Impulse Framing Nailer  Logo

1,996 people viewed this question

Ask a Question

Usually answered in minutes!

Top RTO Air Tools & Compressors Experts

John Trevino

Level 3 Expert

1383 Answers

Brad Brown

Level 3 Expert

15133 Answers

Matt Olenzek
Matt Olenzek

Level 2 Expert

293 Answers

Are you a RTO Air Tool and Compressor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...