HP F4280 deskjet all in one printer paper feeding problem
I got this HP F4280 deskjet all in one printer last summer. It had worked fine until a month ago when the paper was jammed. I pulled it out and since then the printer would not feed paper properly. The E light is always on when the printer is turned on, while the orange light for the resume button is always blinking.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Solved: I can hear it printing, but the paper is blank when it's finished. ... Mark as New; Bookmark; Subscribe; Subscribe to RSS Feed · Highlight · Print · Report ... green checks say every thing is good to go, but the test print comes out blank,. ... Reinstall the cartridges into the product, and then gently close the cartridge door.
Uninstall the printer, delete drivers, look if new drivers are available for it and reintall the printer. If problem continues my guess is that your printer is defective. Printers are made of chep plastic materials and after some use parts get worn out and break down. HP has a so called repair kit available for repair service. If your printer won't pick papaer, quite probably some of these partss is damaged. If you don't know how to repair printers aand dont have access to parts, take it to a repair service.
The easiest way to clean the paper path if you think you have a jam but cannot see anything is to "floss" the paper path with a heavier piece of paper. Take a narrow piece of heavy paper (inch wide) feed it through the paper path until you can grasp both ends and the move it back and forth carefully so you do not break a sensor by accident.
Observe weather printer acting like printing some thing?.. cartridges are dried up, clean them or replace them.If printer ejecting the paper every time, clean paper registration sensor, clean paper pickup assm & disc encoder..
The feed rollers are probably dirty. look inside where the leading edge of the paper sets, the feed roller are right above..might only be 1 roller. Put some rubbing alcohol on a rag (not a tissue or paper towel) and clean the roller. It will only roll one way. Hope this helps
Have you used the disc and installed it on your computer as per instructions? If not or if you used a usb cable and plugged it in too soon, or the installation failed to install all programs for the printer and needs to be reinstalled amd set up again properly.