Question about Lexmark X4270 All-In-One InkJet Printer

1 Answer

My lexmark is showing a code of 1201 and it will not print. (X4270)

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Mentor:

    An expert who has written 3 tips or uploaded 2 video tips.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 167 Answers

Kindly try this:

- Power the printer off.
- Remove all cables from the back of the printer.
- Reinsert the power cord.
- Switch the printer back on.
- Check the operator panel to see if the 1201 error message is displayed.If the error message returns, the printer could be defective. Contact Lexmark Customer Support for further troubleshooting and warranty options.

Posted on Mar 11, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is an error message #1201 on a Lexmark x4270?


The 1201 error message could indicate a serious hardware failure. Try to power the printer off > remove all cables from the back of the printer > re-insert the power cord > switch the printer back on and check if the error re-appears on the printer display screen.
Should the error persist, please contact Lexmark Technical Support Center for additional assistance.

Dec 05, 2011 | Lexmark X4270 All-In-One InkJet Printer

1 Answer

WHAT IS ERROR MESSAGE 1201 ON LEXMARK X4270 7 HOW DO I FIX IT?


Hi There,
The definition corresponding to this error message is "The print carrier stopped before all of the data was used." To resolve this issue, please do the following:
  1. Power the printer off.
  2. Remove all cables from the back of the printer.
  3. Reinsert the power cord.
  4. Switch the printer back on.
  5. Check the operator panel to see if the 1201 error message is displayed.
  6. If the error message returns, the printer could be defective. Contact Lexmark Customer Support for further troubleshooting and warranty options.
Please vote me if you think that this issue resolved your issue... Thanks Enjoy and Cheers !!!!

Oct 28, 2010 | Lexmark X4270 All-In-One InkJet Printer

1 Answer

WHAT DO i DO FOR ERROR # 1201?


The error message describes that: "The print carrier stopped before all of the data was used."

To reset the error code , try the following steps:
  1. Power the printer off.
  2. Remove all cables from the back of the printer.
  3. Reinsert the power cord.
  4. Switch the printer back on.
  5. Check the operator panel to see if the 1201 error message is displayed.
  6. If the error message returns, the printer could be defective.
  7. Contact Lexmark Customer Support for further troubleshooting and warranty options.

Jan 14, 2010 | Lexmark X4270 All-In-One InkJet Printer

1 Answer

Error 1201


Problem Error 1201; Carrier stall; Printer stopped Solution The definition corresponding to this error message is this: "The print carrier stopped before all of the data was used." To resolve this issue, please do the following:

  1. Power the printer off.
  2. Remove all cables from the back of the printer.
  3. Reinsert the power cord.
  4. Switch the printer back on.
  5. Check the operator panel to see if the 1201 error message is displayed.
  6. If the error message returns, the printer could be defective. Contact Lexmark Customer Support for further troubleshooting and warranty options.

Nov 11, 2009 | Lexmark X4270 All-In-One InkJet Printer

1 Answer

Printer reads align head, error #1201


sed." To resolve this issue, please do the following:
  1. Power the printer off.
  2. Remove all cables from the back of the printer.
  3. Reinsert the power cord.
  4. Switch the printer back on.
  5. Check the operator panel to see if the 1201 error message is displayed.
  6. If the error message returns, the printer could be defective you need to get it serviced
  7. Good luc

Apr 25, 2009 | Lexmark X4270 All-In-One InkJet Printer

1 Answer

Error codes 1201 and 1203


Hello, erorr 1203 is telling you there is one of a few issues with your cartridge/s. Check the contacts are cleaned and printheads. Make sure there are no paper jams. Reset the printer by turning it off and completely unplugging it and replugging it and turn it back on again. Clear print queue, check it is set to work offline in settings. Press copy and copy something and see if it is ok now. Error 1201 is a communication issue with data where your cartridge has stoped for one or more reasons and h eprint data was not completed or used. Try the reset to fix this too. Post back if no good. Don't forget to clear print queue.

Nov 17, 2008 | Lexmark X4270 All-In-One InkJet Printer

3 Answers

Lexmark fax machine series x4270 has an error code saying #1200


Please click on this link :
http://support.lexmark.com/perl/support/support.cgi

and then click on support ,once the page is opened please center X4270 in
Search by Model ,after that choose Lexmark X4270 ,after seconds a page will open and then in
Search the KnowledgeBasePut this number and follow the steps given:

ENUS23485


good luck...

Oct 26, 2008 | Lexmark X4270 All-In-One InkJet Printer

1 Answer

Lexmark x4270 copy and fax


The definition corresponding to this error message is this: "The print carrier stopped before all of the data was used." To resolve this issue, please do the following:
  1. Power the printer off.
  2. Remove all cables from the back of the printer.
  3. Reinsert the power cord.
  4. Switch the printer back on.
  5. Check the operator panel to see if the 1201 error message is displayed.
  6. If the error message returns, the printer could be defective. Contact Lexmark Customer Support for further troubleshooting and warranty options.
reference: http://support.lexmark.com/cgi-perl/knowledgebase.cgi?ccs=229:1:0:439:0:0&framed=&docid=ENUS22014&relevance=1

Please rate this solution. =)

Jul 14, 2008 | Lexmark X4270 All-In-One InkJet Printer

1 Answer

Error #1201 accured


The definition corresponding to this error message is this: "The print carrier stopped before all of the data was used." To resolve this issue, please do the following:
  1. Power the printer off.
  2. Remove all cables from the back of the printer.
  3. Reinsert the power cord.
  4. Switch the printer back on.
  5. Check the operator panel to see if the 1201 error message is displayed.
  6. If the error message returns, the printer could be defective. Contact the printer company if within warranty they will replace the printer.

Mar 05, 2008 | Lexmark X4270 All-In-One InkJet Printer

1 Answer

Error code 1201


The definition corresponding to this error message is this: "The print carrier stopped before all of the data was used." To resolve this issue, please do the following:
  1. Power the printer off.
  2. Remove all cables from the back of the printer.
  3. Reinsert the power cord.
  4. Switch the printer back on.
  5. Check the operator panel to see if the 1201 error message is displayed.
  6. If the error message returns, the printer could be defective. Contact Lexmark Customer Support for further troubleshooting and warranty options.

Nov 30, 2007 | Lexmark X4270 All-In-One InkJet Printer

Not finding what you are looking for?
Lexmark X4270 All-In-One InkJet Printer Logo

Related Topics:

127 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexmark Printers & Copiers Experts

Roopesh S
Roopesh S

Level 2 Expert

228 Answers

Sanath Kumar V

Level 3 Expert

684 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18297 Answers

Are you a Lexmark Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...