Question about Toshiba DKT3020SD Corded Phone

6 Answers

Programming a Name in Toshiba DKT3020-SD

At my place of employment, we have Toshiba DKT3020-SD telephones. I need to know how I can change the name on the phone in my office to mine. It still says the girl who worked there before me. Any help?

Posted by on

6 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

To edit display name on LCD DKT3020-SD.

Follow this sequence:

Mode
Scroll
Enter passwork - 0000 is default
Hold
Hold (again)
DN ID (This is your phone extension #)

Old name should now be displayed. Hit page button to delete letters, scroll button for space.

Use characters for the the associated number key to enter desired name. For example if you want an "F" you would hit the 3 button 3 times. After your name is entered, press hold. Pick up and put down receiver.

Posted on Mar 25, 2010

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

To edit the name displayed on the LCD by your extension begin by entering edit mode
DN + #621

The following key sequences perform the associated commands
* = move cursor Left
# + 1 = delete
# + 2-9 (+0) = characters

For characters the associated number will display the first letter and move the cursor one position to the right. For subsequent letters press 0. Say you want the letter L. Press # + 5 to display J. Press 0 to display K. Press 0 again to display L.

For chartacters Q and Z ????

Example: To change my displayed name to TODD
DN + #621
* to left most position (beginning)
# + 8
6 + 0 + 0
3
3

Posted on Mar 26, 2009

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I tried to do DN *621, but it only says DATA PROGRAMMED. Will anything else work?

Posted on Nov 04, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

WHAT IS DN? I THINK I READ ITS MY EXT # BUT IF I ENTER MY EXT # AND TRY TO ENTER #621 IT SAYS EXTENSION NUMBER BUSY

Posted on Nov 08, 2012

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

No solution but same thing happens with my DKT3210C-SD

Posted on Mar 16, 2010

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Press Intercom and then #621

Posted on Apr 29, 2015

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

On a Toshiba DKT3020-SD how do I add a night time message?


Here is the location of the manual for download: http://www.manualslib.com/download/375822/Toshiba-Dkt3010-Sd-Digital-Phone.html

Mar 04, 2015 | Toshiba DKT2020SD Phone

1 Answer

How do I turn off flashing message notification?


Try leaving the phone on the hook and entering Intercom #409. You may have to do this a few times if the "phantom messages" are stacked up.

Sep 17, 2014 | Toshiba DKT3020-SD Display Telephone

1 Answer

What is the log in code to change the name on your mailbox?


The display name in voice mail is normally programmed by a computer having access to the programming. This is the name associated with a mailbox in programming. Find out who has access to make these changes.

Feb 01, 2013 | NorStar M7324 Telephone

1 Answer

Toshiba DKT2020SD Phone Change date/time


Changing time on Toshiba DKT3020-SD

Oct 01, 2010 | Toshiba Phones

1 Answer

How do I change the name on a nortel phone?


To chane the name on the sets you'll need to enter telephone programming.
Programming is done on 7310, 7324 and 7316 type sets.
Enter programming by pressing the feature key followed by **266344.When prompted to enter the password enter 266344.
The screen should say TERMINALS&SETS. The 4 top line/feature keys are now used for programming.
At the terminals&sets prompt, press the show key (top right arrow).
The display should now ask for an extension number.
Enter extension number you want to change the name on.
Press the show key (top right arrow)
The display should say LINE ACCESS
Press the next key (bottom right arrow) .
The display should say CAPABILITIES.
Press the next key (bottom right arrow) .
The display say Name.
press the Chng soft key.
use the dial pad to enter the name. advance using the arrow soft key to go to the next letter
ex. Bill = 2,2 -> 4,4,4 -> 5,5,5 -> 5,5,5
Press the next key (bottom right arrow) to enter the name.
Press the release key when finished

Jul 28, 2010 | NorStar M7324 Telephone

2 Answers

Change the inter callers name


To chane the name on the sets you'll need to enter telephone programming.
Programming is done on 7310, 7324 and 7316 type sets.
Enter programming by pressing the feature key followed by **266344.When prompted to enter the password enter 266344.
The screen should say TERMINALS&SETS. The 4 top line/feature keys are now used for programming.
At the terminals&sets prompt, press the show key (top right arrow).
The display should now ask for an extension number.
Enter extension number you want to change the name on.
Press the show key (top right arrow)
The display should say LINE ACCESS
Press the next key (bottom right arrow) .
The display should say CAPABILITIES.
Press the next key (bottom right arrow) .
The display say Name.
press the Chng soft key.
use the dial pad to enter the name. advance using the arrow soft key to go to the next letter
ex. john = 5 -> 666 -> 44 -> 66
Press the next key (bottom right arrow) to enter the name.
Press the release key when finished

Jul 16, 2010 | NorStar M7324 Telephone

2 Answers

On a Toshiba DKT3020-SD, how do I enter the User Programming Mode. I tried pressing #9876 but it did nothing.


There are two programming modes. One is User the other is system. for user programming press 3,6,9,hold at same time. For system type hold *#*#1*2*3* and enter password 0000

Feb 04, 2010 | Toshiba DKT3020SD Corded Phone

1 Answer

Phonebook on Mitel Superset 4025


It depends on your Mitel Telephone system.

If your system is an SX200 ICP ~ then going thru the Blue Superkey options the Mitel will let you change your own name.

But ~ if you have a 3300 ICP then the name change is only performed via the system programming.

Mar 26, 2009 | Mitel Superset 4025 Corded Phone...

1 Answer

We have a Toshiba DKT 3210-SD phone system and can't seem to figure out how to reprogram the name of the person that is using that phone, The names located in the top left hand corner of the screen are of...


If you have the software you can get in and program via station assignment.
If you admin, programmed on any ext you can program.
If not we can remote into your system and change them.
info@ameritelnj.com
Tony

Jan 26, 2009 | Toshiba DKT-2020-SD telephone

1 Answer

Merian M7324 display name


you would need to get into the admin programming to change the name, have your system admin person make the change for you.

Jan 02, 2009 | NorStar Meridian M7310 Phone

Not finding what you are looking for?
Toshiba DKT3020SD Corded Phone Logo

4,918 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba Phones Experts

kakima

Level 3 Expert

96663 Answers

yadayada
yadayada

Level 3 Expert

61186 Answers

Cindy Wells

Level 3 Expert

4759 Answers

Are you a Toshiba Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...