Question about Acer Aspire 5610-4648 Notebook

2 Answers

I want hair into my lcd.

How can I get hair to get into my lcd screen? I find it pretty cool.

Thanks,

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

You want to make sure the hair you use don't get blown away by wind so close your windows and turn off the fan. Of course it's going to get hot inside the room, so take off your clothes. Once your clothes are off, you may extract whatever hair you have on your person either with your bare hands or a pair of scissors. I recommend the former as you may display to your friends (if you have any) as a labor of joy. If you wish to highlight the "joy" part, you may choose the hair from the old "south of border" region. Once completed, line up all your hair on the table, then apply super glue on one end. It won't matter which super glue you use, as long as the hair will be permanently stuck to your LCD. Don't wait too long to affix glued hair to your LCD screen.

Voila. You have a new computer. Enjoy.

Posted on Mar 11, 2009

  • HShin
    HShin Apr 29, 2014

    It seems someone has hacked into my account and posted the insipid drivel above. And it appears that this website doesn't allow us to delete or edit our own comments.

×

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 285 Answers

This is bad. Dont do it.

Posted on Mar 11, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kettler spare parts list


Look on the lcd display and type the part number into your favourite search engine.

May 21, 2013 | PC Laptops

1 Answer

Sometimes the Laptop works pretty good, but sometimes the screen blinks, and few others doesnt show anything. I took the laptop to a store, they say the circuits, lamp, cable are ok, but the LCD needs to...


Hi

If the LCD screen is blinking most of the tiem its an LCD problem and LCD needs to be replaced but ther are cases that it only needs a driver update from your video card. I recommend you do that first. Try to call Toshiba to check and give you the updated driver for your video card. If problem persists after updating the driver sadly you need to change your LCD as they suggested. Thanks

Feb 22, 2011 | Toshiba Satellite A215-S5837 Notebook

1 Answer

A little while ago the LCD backlight started going off after 5 seconds (when warm) to 30 seconds (when cold). I think I may have bumped the screen. But anyway, what might be wrong with my screen and how...


The blacklight inverter or power supply is usually the problem when this happens.
Depening on the model of the notebook the blacklight is fair - moderate to fix. All you need is a backlight inverter (its like the ballast in the lcd)
the light is usually a thin light at the bottom of the lcd. You can find them on ebay pretty cheap. I would defintally recommend if you take it apart to buy the bulb and the inverter that way you can replace both to save you trouble in the future. Again this can be pretty hard depending on the notebook so be careful you can easly damage the notebook. Thanks
Steven.

Apr 29, 2010 | IBM ThinkPad T42 Notebook

1 Answer

Laptop won't boot up


1 suggestion.

Inside your laptop is a processor. The Cooling Fan, and Air Intake Duct you mentioned, are part of the cooling system. The main job for the cooling system, is to keep the processor at a reasonable operating temperature.

When a processor becomes too hot it turns off. (Actually BIOS turns it off)

With the amount of foreign debris you mentioned, (Dust/Dirt/Hair/Carpet Deodorizer/Food Crumbs/Lint, are a few examples of foreign debris), the Cooling Tube may be clogged.
Just using a can of compressed air for computers, in the Air Intake Duct, (DO NOT blow into the Exhaust Duct!), may not be enough.

Generally the Cooling Tube is about the width of your finger, and the height is half the thickness of a finger. Pretty small tube, and easily clogged. Also the Heatsink at the end of the cooling tube, can become clogged.

Laptops have a poor cooling design anyway. Everything is crammed into one tiny box. They use a small fan to cool them, and the Air Intake Duct is typically located on the bottom. (Some are on the side) This is a good (?) area to inhale readily available foreign debris.

On the link below the last photo on the page, shows an average Cooling Tube that is attached to a Heatsink.
http://www.insidemylaptop.com/clean-cooling-module-acer-aspire-3620/

This requires opening the laptop, and physically removing the foreign debris. Typical method is a combination of Q-tips, and Isopropyl Alcohol, plus a can of compressed air.
(AC adapter {Charger} removed, battery removed. Use an ESD wrist strap, and connect it's alligator clip to a good ground)

By the way. You DID have the AC adapter, (Charger), disconnected, and battery out, when you used the can of compressed air, right?

Jul 25, 2009 | Acer Aspire 5720-6661 Notebook PC

2 Answers

Dell B130 boots but nothing on screen and no boot up sounds


If you are seeing an shadow image on the LCD and you have video on an external monitor, then the LCD backlight has failed. The LCD will need to be replaced

I googled B130 LCD's and they generally run $125 to $200

Jan 13, 2009 | Dell Inspiron B130 Notebook

2 Answers

Hair in my monitor


dam man tht sux, well u basically have to get inside your system to take it out. take off the plastic surroundong the screen and get to the lcd screen then take it out, really hard, i would get some professional if u really wanted it out.

Apr 07, 2008 | Toshiba Satellite A105 Notebook

1 Answer

Wet Display


if you have already experienced opening a laptop lcd just go ahead and open it but probably the water already sipped into your lcd... chances are you can still hope to manually repair it by a weired solution... or just have it replaced by your laptop manufacturer if still it got some warranty.

first turn off your laptop and open your lcd holder then gently turn over your lcd... (make sure you wont crack it or pull some cables at the bottom. take some clear cotton white cloths and sandwich your LCD with 1/2 inch of those cloths... take a hair dryer and blow the cotton until its warm enough.... let it just cool out and test your display....

alternative if you got no hair dryer you can just leave it out in the sun for 15 mins depend on how warm the day is.

note: don't do this inside a air conditioned room or you will worsen your problem cause there will be some moisture left...

rate me if his help you cause i already tried this a couple of times...

Jan 20, 2008 | Gateway MX8711 Notebook

1 Answer

Problem with LCD


Indeed offered solution is most likely correct. However I can suggest you to ensure if dots/lines appear even before windows screen comes. If yes thats the conclusion that your LCD Module has dead pixels or internal connectors has connectivity issue. Consult a local Hands on technician. LCD module might be costly you can always use an external monitor with your laptop.
Good luck. Happy new year.

Dec 27, 2007 | Acer Aspire 3002LCi Notebook

Not finding what you are looking for?
Acer Aspire 5610-4648 Notebook Logo

Related Topics:

72 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acer PC Laptops Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Henk de Ruiter
Henk de Ruiter

Level 2 Expert

78 Answers

Are you an Acer PC Laptop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...