Question about Russell Hobbs RH-HB3 Handheld Blender

Open Question

My Russell Hobbs Handheld Blender model:RHHB3WS stopped working... warranty is up. Any suggestions?

Posted by on

  • stracy661 May 15, 2009

    I have the same problem. The unit won't turn on, and doesn't seem to have power despite being plugged in.

×

5 Suggested Answers

  • 4 Answers

SOURCE: russell hobbs rhhb3 handheld stopped working

Yes, pry the display cover off and you will find 2 screws. You will find a switch and circuit board. From the circuit board to the switch you will finf a fuse. This is probaby the problem.

Posted on May 19, 2010

  • 16 Answers

SOURCE: russell hobbs food collection blender

Dear
karan plz cheak motor unit swith anther
plz coll me
my ph no - 23051554 \ 23095757
mumbai

Posted on Aug 05, 2008

  • 10865 Answers

SOURCE: Need replacement blade for Russell Hobbs hand mixer

go to this page http://www.russell-hobbs.com/parts.shtml and order what you need directly from Russel Hobbs.

Please mark this answer as a fixya! thanks

Posted on Mar 18, 2009

  • 11 Answers

SOURCE: my russell hobbs stand mixer/blender has just

Contact the manufacturer. It's probably still under warranty

Posted on Apr 29, 2009

  • 1 Answer

SOURCE: broken Part

Hi, i read your are having trouble with the tap on your blender. We pulled our blender out of the box and used it for the first time and it leaked through the base, through the motor all over the bench top.

At first i thought the tap was leaking too, then I investigated a little bit and found it was leaking through the white tension clips on the inside of the black base.

Then i discovered that there is a recess for an "O" ring, which seals the glass jug to the black base thus solving the leak.

However there was no "O" ring in the recess and now I am trying to find a replacement one.

Hope this helps.

Posted on Sep 04, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I require replacement blade and glass blender jug for model 14071


Presumably a Russell Hobbs though you did not say; the blender is obsolete and parts hard to source,furthermore given the price of comparable parts it would be cheaper to buy a new blender. I hate it when that happens.

Jul 12, 2014 | Blenders

1 Answer

Need a rubber seal for russell hobbs 18276 blender


I also needed a seal - contacted Russell Hobbs - told that product is discontinued - they do not hold stock on the seal. Great service !!

Dec 05, 2013 | Russell Hobbs 18276 Allure 1.5l Jug...

1 Answer

I would like blade seal


Are you in the UK? If so, I got hold of replacement parts for my russell hobbs hand blender from http://www.productcareuk.com .They have a telephone number too if you cant see it on their website.

Good luck!

Aug 11, 2012 | Russell Hobbs 14449 2Speed Blender

1 Answer

Service center required in Gurgaon/Delhi, INDIA for Russell product


i bought a juicer model no. RJE700 last year .since i bought it it gives a burnig smell and a squeaky sound inspite of readjusting the fitting of the parts.help

Aug 17, 2011 | Russell Hobbs RH-HB3 Handheld Blender

1 Answer

I have just bought a Professional Platinum 4500 blender. When I press the self clean button, there is no cycle; it stops as soon as I release the button. What am I doing wrong? I followed the instructions...


I'm afraid I can't answer this, but am posting to say I've just discovered exactly the same problem with my newly-purchased blender - same model - and have contacted Russell Hobbs service department to find out if I'm doing anything wrong (i'm sure I'm not!). I'll post any response here.

Jan 11, 2011 | Russell Hobbs Blenders

1 Answer

It runs until I put it into the liquid then the detachable blender stops working.


It seems that the power is low on to the motor and so will have to see if there is a friction on the drive.
If not check the motor for poor brush connections that reduces the power when the load is applied.
The other problem is if cleaning can solve it will be the best as a replacement may not be feasible with the cost and availability.
Hope you try this tip.

Aug 21, 2010 | Russell Hobbs RH-HB3 Handheld Blender

2 Answers

Russell hobbs rhhb3 handheld stopped working


Yes, pry the display cover off and you will find 2 screws. You will find a switch and circuit board. From the circuit board to the switch you will finf a fuse. This is probaby the problem.

Sep 12, 2009 | Russell Hobbs RH-HB3 Handheld Blender

1 Answer

Need replacement blade for Russell Hobbs hand mixer


go to this page http://www.russell-hobbs.com/parts.shtml and order what you need directly from Russel Hobbs.

Please mark this answer as a fixya! thanks

Mar 18, 2009 | Russell Hobbs RH-HB3 Handheld Blender

1 Answer

Russell hobbs food collection blender


Dear
karan plz cheak motor unit swith anther
plz coll me
my ph no - 23051554 \ 23095757
mumbai

Aug 01, 2008 | Russell Hobbs 3902US Work Top Blender

Not finding what you are looking for?
Russell Hobbs RH-HB3 Handheld Blender Logo

Related Topics:

624 people viewed this question

Ask a Question

Usually answered in minutes!

Top Russell Hobbs Blenders Experts

eyecam

Level 2 Expert

86 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

yadayada
yadayada

Level 3 Expert

61168 Answers

Are you a Russell Hobbs Blender Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...