Question about Sony PlayStation® 3 (80GB) Console

1 Answer

I cant do system update even when I have disabled the media server connection and my obtain ip address and internet connection says it succeededs.

Posted by on

  • ramuneeth Mar 16, 2009

    I tried using the usb to do my system update from the computer but when everytime I tried to install it in the usb it doesnt install all the way.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer got voted for 20 times.

  • Sony Expert
  • 172 Answers

Well there is more ways you can update your system if you have a ubs drive go to sony web page and go to playstation 3 and install the update on the remomavle usb but first you have to connect your usb to your computer and create a new fordel name it PS3 and then open this folder and created another folder and name UPDATE in this folder is where you have to download the update but make sure you name the folders using capital letters once you have the update ready go to system update and select update via remomable disk and follow the instructions thanks and good luck remember to rate my help thanks

Posted on Mar 13, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I cant get into the internet and i need to before the 27th of december i need the internet and i cant get what should i do


JUST TRY.does your net status already connected?. if your connected, try to open internet connection and click properties then double click INTERNET PROTOCOL(TCP/IP) mark obtain ip address automatically
and below obtain DNS server automatically or USE THE FOLLOWING DNS SERVER,
PREFERRED DNS 208.67.222.222
ALTERNATE DNS 208.67.220.220

Dec 26, 2010 | Video Game Consoles & Games

1 Answer

Cant connect to my wireless router and the 192.168.01 url entered doesnt help none


Windows XP
  1. Verify Ethernet adapter in device manger.
    1. Click Start > Search > Type in ncpa.cpl and press Enter.
    2. Click System>Hardware > Device Manager
    3. Click Network Adapters
    4. Verify adapter present, enabled, and no error messages.
    5. If error reported refer to OEM regarding error receiving
  2. Open the Network Connections window.
    1. Click on Start > Run > Type in ncpa.cpl and click OK.
  3. Double-click on the Local Area Connection icon.
  4. Click the Support tab.
    1. Ensure that Address Type: says "Assigned by DHCP."
    2. Ensure that the IP address is valid.
    3. If both are correct, click the Repair button and then skip to Step 9.
  5. If it does not say "Assigned by DHCP" click the General tab and then click Properties.
  6. Select "Internet Protocol TCP/IP" and then click on the Properties button.
  7. Ensure that the radio buttons are marked as "Obtain an IP Address automatically" and "Obtain a DNS Server address automatically" and click OK.
  8. Click OK again to close out of the Local Area Connection properties.
    1. Restart the system if any changes were made to the configurations.
  9. Right-click on Local Area Connection and select Repair.
  10. If the repair fails because the system is unable to flush the ARP Cache, the Routing and Remote Access service will need to be stopped and set to disabled.
    1. Click Start>Run>Type services.msc >Click OK.
    2. Double-click on Routing and Remote Access.
    3. Click the Stop button.
    4. Set Startup Type to Disabled and click Apply, then OK.
    5. Restart system.
  11. If the Repair fails to renew the IP address, ensure that all firewalls are disabled and try again.
  12. If it still fails, reset the networking protocols.
    1. Click Start>Run>Type CMD and click OK.
    2. Type netsh int ip reset reset.log and press Enter.
    3. Type netsh int ip delete arpcache and press Enter.
    4. Type netsh winsock reset and press Enter. (SP 2 or later)
    5. Type ipconfig /flushdns and press Enter.
    6. Restart the system.
Windows Vista
  1. Verify Ethernet adapter in device manger.
    1. Click Start > Search > Type in ncpa.cpl and press Enter.
    2. Click Hardware and Sound > Device Manager
    3. Click Network Adapters
    4. Verify adapter present, enabled, and no error messages.
    5. If error reported refer to OEM regarding error receiving
  2. Open the manage Network Connections window.
    1. Click Start > Search > Type in ncpa.cpl and press Enter.
  3. Right-click on Local Area Connection and select Properties.
  4. Uncheck Internet Protocol Version 6 (TCP/IPv6).
  5. Select "Internet Protocol Version 4 (TCP/IPv4)" and then click on the Properties button. (Do Not Uncheck Version 4).
  6. Ensure that the radio buttons are marked as "Obtain an IP Address automatically" and "Obtain a DNS Server address automatically" and click OK.
  7. Click OK again to close out of the Local Area Connection properties.
    1. Restart the system if any changes were made to the configurations, including unchecking TCP/IPv6.
  8. Right-click on Local Area Connection and select Diagnose.
  9. If Diagnose fails to renew the IP address, ensure that all firewalls are disabled and try again.
  10. If it fails again, choose to "Reset the Network Adapter."
  11. If it still fails, reset the networking protocols.
    1. Click Start>All Programs>Accessories.
    2. Right-click on Command Prompt and select "Run As Administrator"
    3. Type netsh int ip reset reset.log and press Enter.
    4. Type netsh int ip delete arpcache and press Enter.
    5. Type netsh winsock reset and press Enter.
    6. Type ipconfig /flushdns and press Enter.
    7. Restart the system.
Windows 7
  1. Verify Ethernet adapter in device manger.
    1. Click Start > Search > Type in ncpa.cpl and press Enter.
    2. Click Hardware and Sound > Device Manager
    3. Click Network Adapters
    4. Verify adapter present, enabled, and no error messages.
    5. If error reported refer to OEM regarding error receiving
  2. Open the manage Network Connections window.
    1. Click Start > Search > Type in ncpa.cpl and press Enter.
  3. Right-click on Local Area Connection and select Properties.
  4. Uncheck Internet Protocol Version 6 (TCP/IPv6).
  5. Select "Internet Protocol Version 4 (TCP/IPv4)" and then click on the Properties button. (Do Not Uncheck Version 4).
  6. Ensure that the radio buttons are marked as "Obtain an IP Address automatically" and "Obtain a DNS Server address automatically" and click OK.
  7. Click OK again to close out of the Local Area Connection properties.
    1. Restart the system if any changes were made to the configurations, including unchecking TCP/IPv6.
  8. Right-click on Local Area Connection and select Diagnose.
  9. If Diagnose fails to renew the IP address, ensure that all firewalls are disabled and try again.
  10. If it fails again, choose to "Reset the Network Adapter."
  11. If it still fails, reset the networking protocols.
    1. Click Start>All Programs>Accessories.
    2. Right-click on Command Prompt and select "Run As Administrator"
    3. Type netsh int ip reset reset.log and press Enter.
    4. Type netsh int ip delete arpcache and press Enter.
    5. Type netsh winsock reset and press Enter.
    6. Type ipconfig /flushdns and press Enter.
    7. Restart the system.
I hope this helps

Oct 01, 2010 | Computers & Internet

2 Answers

Am trying to connect to the internet on my ps3. I have a Linksys E1000 wireless router. I go through the step by step connection process and It keeps saying: "Obtain IP Address-Succeeded, Internet...


I got every solution in the book and tried them. I learned that the simplest solution is always the best. I was getting the same messages.

Make sure the "Media Server" on your PS3 is set on "disabled"

Make sure that UpNp is "disabled" on router. (I know that previous answer said opposit but I am just saying what worked for me).

The key really seemed to be disabling the media server. Try it and let me know. As I said, I tried all the complex solutions and think it was just the media server.

Aug 10, 2010 | Sony Playstation 3 (PS3) Console

1 Answer

System Update Troubles


you can contact ps3 tech support on Tel: 08705 99 88 77
I was talking to a courier driver the other day and he says that he has picked up no end of PS3s with errors

Jan 25, 2009 | Sony Playstation 3 (PS3) Console

1 Answer

My computer cant find my router


  1. Make sure your network cable from the modem to the router is good and connected to the uplink port
  2. If connecting directly try other port
  3. Check local area connection properties
  4. Double click "local area connection"
  5. On the middle box find and highlight "Internet Protocol ( TCP/IP) and click "Properties" button
  6. Make sure "Obtain an IP Address automatically" and "Obtain DNS server address automatically" are the only ones checked and click "ok" button
  7. Make sure "ethernet card" is NOT disabled
  8. Update ethernet card driver if necessary.
Wireless:
  1. Turn wireless switch on
  2. Check wireless connection properties and that Internet Protocol TCP/IP configuration is similar to the above
  3. On wireless properties select "Wireless Network" tab and Add your SSID (wireless network name) if not there and if there Move "Up"
  4. Update wireless card driver
Router:

  1. Double check to see that "Automatic Configuration" DHCP is selected
  2. Double check to see if "DHCP"server is enabled
  3. Check wireless network mode and select correct mode
  4. Check wireless channels and adjust as necessary

Jan 18, 2009 | Belkin (F5D7230-4) Router (587009)

1 Answer

I cant conect to my dynex router with my new computer but is working for my old lap top


You must configure your wireless connection properties to "Obtain IP address automatically " and "Obtain DNS server address automatically"

also check your "wireless adapter"configuration
Or that you have the correct or updated wireless driver
Or that its "Enabled" and not "disabled"

Jan 18, 2009 | Computers & Internet

1 Answer

Internet connection failed but IP address obtained.


sounds to me like you have the security turned on . Just type in your security key on PS3 and it should connect. Best of luck!

Jan 11, 2009 | Video Game Consoles & Games

8 Answers

Ps3 error 80710723


This same problem happened to me awhile ago. The way I fixed it was I went under settings to network settings. Then went down to media server connection and disabled that. Once I did that I had no trouble at all updating games. Hope this helped :)

Oct 18, 2008 | Sony Playstation 3 (PS3) Console

1 Answer

Heeeellllllpppppp!


I look all over the net but could't find anything, until i found a site that said they
could show me how to fix any problem with my ps3. At first i was not so
sure about ordering the manual but i did, whats $5 plus i used paypal, but
long story short i fix my ps3, i recomend this site www.gameme.20fr.com
i hope this help you like it help me. PLAYSTATION FAN FOR LIFE! waiting on PS4

Mar 08, 2008 | Sony Playstation 3 (PS3) Console

1 Answer

Wireless connection problem


Internet Setup

Internet Connection Type: Obtain an IP automatically
Host Name: linksys
Domain Name:
MTU: Enable Disabled
Speed & Duplex: 10 Mb Half

Local IP Address: 192.168.1.1
Subnet Mask: 255.255.255.0

Local DHCP Server: Enabled
Start IP Address: 192.168.1.
Number of Address: 50
DHCP Address Range: 192.168.1.100 ~ 149
Client Lease Time: 0 (0 means two day)
Static DNS 1:
Static DNS 2:
Static DNS 3:
WINS:

DDNS: Disabled
NAT: Enabled
Dynamic Routing: Disabled

Wireless: Enabled

Wireless Network Name(SSID): linksys
Wireless Channel: 6 - 2.442 GHZ7
Wireless SSID Broadcast: Enabled
Wireless Security: Disabled

Feb 23, 2008 | Dell Inspiron 1200 Notebook

Not finding what you are looking for?
Sony PlayStation® 3 (80GB) Console Logo

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Video Game Consoles & Games Experts

Iron
Iron

Level 3 Expert

3018 Answers

shaun taylor

Level 3 Expert

1454 Answers

marley mcelhinney

Level 3 Expert

490 Answers

Are you a Sony Video Game Console and Game Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...