Question about IBM eServer xSeries 306m 8849 (8849E5U)

1 Answer

Install Server 2003 Problem

I'm installing Server 2003 and it can't detect the hard disk(s). What should I do?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 15 Answers

Can the drives be seen in the BIOS?

Posted on Mar 12, 2009

6 Suggested Answers

  • 173 Answers

SOURCE: Can not install windows server 2003 on Acer Altos G710

Hi! Turn off computer check cable & power cable connection. Windows 2003 Operating System will not support SCSI Drives.

Posted on Apr 08, 2009

falsafat
  • 31 Answers

SOURCE: hard disk no detect in installtion of window

You need to give windows installation the drivers for your Sata-Bus by pressing F6 while the installation load the drivers (like when we want to install on RAID drive). or do the following method follow the links in that page for Slipstreaming VIA Serial ATA drivers and the other link to create a boot CD Creating a bootable Windows CD with Nero.
it's all in the following link: http://weblogs.asp.net/jkey/archive/2005/08/28/423901.aspx

Posted on Apr 12, 2009

  • 93 Answers

SOURCE: SCSI hard disk is not detecting in IBM xSeries 346 Server

Hi
While running the windows 2003 setup (winnt.exe), it will ask for SASI driver, you have to add the scsi driver... then windows 2003 os will detect the HDD.. then it will install..

Posted on May 19, 2009

  • 103 Answers

SOURCE: new install scsi hard disk no detect in ibm x3400 server

you will need to add the new drive to your array bbfore it will how up to be formated do this throught the array configuration util



Regards Al "alstech"

Posted on May 26, 2009

  • 17 Answers

SOURCE: configure & install two scsi disks scsi disks in ML 150 G2

The SCSI driver is required to installed during the initial boot up for installation when additional drivers are asked .the new models dont come with a Floppy drive so an external floppy drive can be used .The detection of HDD s must be at the startup by the Bios os SCSI card.

Posted on Mar 12, 2010

nkrcs
  • 94 Answers

SOURCE: hard drive not detected

you will need to download the RAID drivers from the Dell website
http://support.dell.com/support/downloads/download.aspx?c=us&cs=19&l=en&s=dhs&releaseid=R74082&SystemID=PWE_PNT_P3C_2450&os=WNT5&osl=en&deviceid=1374&devlib=0&typecnt=5&vercnt=7&formatcnt=2&fileid=126163 and load them onto a floppy drive.

Then when installing the server press F6 to install other drivers this will load the PEC drivers and W2k3 will then see your drives

Do not try to load the drivers from a USB as W2k3 is "preset" to only accept drivers from a floppy drive unlike WIndows server 2008

Hope this helps


Posted on Jul 23, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hard disk drive not detected during installing windows server 2003


It depends on what type of drive you are using. Plus, you may have to specify the array controller drivers if your are using the SAS (Serial Attached SCSI) drives.

May 22, 2013 | Dell POWEREDGE R610 (4640223) Server

1 Answer

I have a dell power edge t300 server. i need to install windows 2003 server. i dont have dell cd for windows 2003 server. while installing the hard disks (scsi) are not detected and setup aborts. how can...


If your Dell server cam with the Windows Server 2003 software, you should be able to order a replacement cd. Go to http://www.dell.com/support If the software was not packaged with the server, you will have to buy it at http://www.microsoft.com/sales

If you have any additional questions contact me by clicking on the "Add a comment" link located under your problem description on FixYa. Also, if you believe that this information was helpful to you, please rate my solution using FixYa's "Solution Helpful" rating scale.
Best regards,
Yavacotech

Jun 23, 2011 | Dell PowerEdge T300 Server

1 Answer

While booting in recovery console it is giving no hard disk found . Server IBM eServer x3400-[797712Q]. OS: Windows 2003 STD


try other good known hard disk install it on your server, if it detect the presence of that disk then your hard disk previously installed has the problem, it going to be defective sooner or already defective

Feb 15, 2011 | IBM x3400 Server

1 Answer

I want to install a new scsi but when my os windows small business server 2003 it gives me "setup either detected multiple disk in your machine that are indistinguishable or detected raw disk(s). Setup has...


using the ACU (array configuration utility) create a raid 0 with this drive after the hard drive is being formatted and is configured as raid 0 (no redundant) restart the server and the hard drive should be detected as a new logical volume with a assigned letter "D" "E"
ACU

Jul 30, 2010 | HP ProLiant ML370 G3 Server

1 Answer

Configure & install two scsi disks scsi disks in ML 150 G2


The SCSI driver is required to installed during the initial boot up for installation when additional drivers are asked .the new models dont come with a Floppy drive so an external floppy drive can be used .The detection of HDD s must be at the startup by the Bios os SCSI card.

Feb 24, 2010 | HP ProLiant ML150 G2 Server

2 Answers

New install scsi hard disk no detect in ibm x3400 server


you will need to add the new drive to your array bbfore it will how up to be formated do this throught the array configuration util



Regards Al "alstech"

May 26, 2009 | IBM x3400 Server

1 Answer

Hard disk no detect in installtion of window server 2003 32 bit oprating system how to install windows server 2003 (32bit) in ibm server x3400


You need to give windows installation the drivers for your Sata-Bus by pressing F6 while the installation load the drivers (like when we want to install on RAID drive). or do the following method follow the links in that page for Slipstreaming VIA Serial ATA drivers and the other link to create a boot CD Creating a bootable Windows CD with Nero.
it's all in the following link: http://weblogs.asp.net/jkey/archive/2005/08/28/423901.aspx

Apr 12, 2009 | IBM x3400 Server

1 Answer

SCSI hard disk is not detecting in IBM xSeries 346 Server


Hi
While running the windows 2003 setup (winnt.exe), it will ask for SASI driver, you have to add the scsi driver... then windows 2003 os will detect the HDD.. then it will install..

Apr 07, 2009 | IBM eServer xSeries 346

Not finding what you are looking for?
IBM eServer xSeries 306m 8849 (8849E5U) Logo

Related Topics:

247 people viewed this question

Ask a Question

Usually answered in minutes!

Top IBM Computer Servers Experts

Jax Planet
Jax Planet

Level 2 Expert

921 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18297 Answers

Venkatesh Kulkarni

Level 2 Expert

181 Answers

Are you an IBM Computer Server Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...