Question about Car Audio & Video

2 Answers

My Aucra 2003's audio system is showing word ''CODE'' only on the dispaly as soon I trun the power on . This happen after jump start today. Please help .

Posted by on

  • navvibc Mar 13, 2009

    Thanks “Broncos1”. I couldn't find any code in user manual but I call my local Acura dealer where I service my MDX only one time. They did not ask me any other question then the serial number. They walk me thru how to get serial number. it was , Turn the key on , Hold 1 and 6 preset number and turn the power on for cd player . This action brings 2 set of number (example A0000 B2222) on the display which I read out the customer service. They give me a 5 digit number which I punch in from the preset number and that is it. Thanks for leading me to right direction.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 17 Answers

You have to enter your code that is listed in your manual. after your battery dies is a security feature. after entering the code your player will go back to normal. every time you lose power you'll have to put that code in

Posted on Mar 11, 2009

  • Michael Mitchell
    Michael Mitchell Mar 13, 2009

    its no problem. just make sure you wrote down that sequence and code so next time your battery dies you wont have to take it back to the dealer. i appreciate the thank you.

×

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

2003 Lincoln LS


that's a mechanical issue, actually...i'm assuming the rest of the cd player is working?

Feb 29, 2008 | Car Audio & Video

1 Answer

Sony music hi fi system mhc-gzr88d show only demo not started


If only demo mode is playing,it's mean set is in standby mode.Normally
in standby mode it can't be operated.You have to power on the set by pressing power botton during demo mode.Once it gets power on,it will
start to work according to user required function.If the set not get power on after pressing power botton,then it's an electrical problem
and need to visit your nearby repairing centre.

Oct 17, 2012 | Sony MHC-GZR88D USB MINI DVD HI-FI SYSTEM...

1 Answer

My problem is that,I have the code but radio is show error 3


Hi,

When this happens it means that 3 incorrect code attempts have been made already and the unit will make you wait for a certain period before you can enter another code.

You must leave the radio powered on continuously and the ignition key must be turned to Accessories On position. Then wait for radio to reset to allow the code to be entered. This can take up to two hours sometimes.

You must not interrupt the power to the unit during the wait period or wait period starts all over again!

Hope this helps. Thanks for using FixYa.

Oct 14, 2011 | Blaupunkt IDC-A09 5-Disc CD Changer

1 Answer

When i want to change from radio to cd function on my head unit nothing happens, the radio works i think it happened when my battery was flat and had to get aa out to restart me, cant be the code as radio...


try pressing the reset switch or disconnecting power to the radio for a few minutes. sometimes jumping the battery sends a voltage spike to the radio and locks up the microprocessor.

Feb 25, 2010 | Alpine CHM-S630 6-Disc CD Changer

1 Answer

Jammed CD


Hello, I see your post is a few months old. If you still need help or a solution for this problem please feel free to contact me at rcruz@radiomedics.com

The loss of power to the unit should not have affected the CD player. It will re-sync upon powering back on but that is normal.

Regards,
Robert Cruz
1-877-4-RADIO-MD

Apr 19, 2009 | Jeep 2003 Liberty RBQ AM/FM Radio w/...

1 Answer

Battery in my 1996 acura rl 3.5 went dead


now there are couple of reason for it
some of the vehicle now days do come with assisted with digital locking & it do some time get malfunctioning it do happen because of disconnection of battery or unplugging battery some time due to low voltage supply current to the audio system so now every manufacturer are having different specific code so do consult with your nearest car authorized workshop or dealer they might help you out with such problem or just ask at any of the authorized Bose audio system operator workshop near you they might also help you for your problem you facing so sir see you soon...

Mar 30, 2009 | Car Audio & Video

1 Answer

Car wont start


I would check all the connections to the battery, sometimes corrosion will cause this problem. Also check where the other end of the battery connections join to the car. Could also be a bad solenoid or starter.

Oct 09, 2008 | Car Audio & Video

2 Answers

Delco Car Radio


When battery power is removed and later applied to a
secured radio, the radio won’t turn on and LOC will
appear on the display.

Unlocking the Theft-Deterrent Feature After a
Power Loss
Enter your secret code as follows; pause no more than
15 seconds between steps:
1. Turn the ignition on. LOC will appear on the display.
2. Press MN and 000 will appear on the display.
3. Press MN again to make the last two digits agree
with your code.
4. Press HR to make the first one or two digits agree
with your code.
5. Press AM-FM after you have confirmed that the
code matches the secret code you have written down.
The display will show SEC, indicating the radio is
now operable and secure.
If you enter the wrong code eight times, INOP will
appear on the display. You will have to wait an hour with
the ignition on before you can try again. When you try
again, you will only have three chances to enter the
correct code before INOP appears.
If you lose or forget your code, contact your dealer.
Disabling the Theft-Deterrent Feature
Enter your secret code as follows; pause no more than
15 seconds between steps:
1. Turn the ignition to ACCESSORY or RUN.
2. Turn the radio off.
3. Press the 1 and 4 buttons together. Hold them down
until SEC shows on the display.
4. Press MN and 000 will appear on the display.
5. Press MN again to make the last two digits agree
with your code.
6. Press HR to make the first one or two digits agree
with your code.
7. Press AM-FM after you have confirmed that the
code matches the secret code you have written down.
The display will show ---, indicating that the radio
is no longer secured.
If the code entered is incorrect, SEC will appear on the
display. The radio will remain secured until the correct
code is entered.
Theft-Deterrent Feature (If Equipped)
THEFTLOCK is designed to discourage theft of your
radio. It works by using a secret code to disable all radio
functions whenever battery power is removed.
The THEFTLOCK feature for the radio may be used or
ignored. If ignored, the system plays normally and the
radio is not protected by the feature. If THEFTLOCK is
activated, your radio will not operate if stolen.
When THEFTLOCK is activated, the radio will display
LOC to indicate a locked condition anytime battery
power has been interrupted. If your battery loses power
for any reason, you must unlock the radio with the secret
code before it will operate.
Activating the Theft-Deterrent Feature
The instructions which follow explain how to enter
your secret code to activate the THEFTLOCK system.
It is recommended that you read through all nine steps
before starting the procedure.
If you allow more than 15 seconds to elapse between
any steps, the radio automatically reverts to time and
you must start the procedure over at Step 4.
1. Write down any three or four-digit number from
000 to 1999 and keep it in a safe place separate
from the vehicle.
2. Turn the ignition to ACCESSORY or RUN.
3. Turn the radio off.
4. Press the 1 and 4 buttons together. Hold them down
until --- shows on the display. Next you will use the
secret code number which you have written down.
5. Press MN and 000 will appear on the display.
6. Press MN again to make the last two digits agree
with your code.
7. Press HR to make the first one or two digits agree
with your code.
8. Press AM-FM after you have confirmed that the
code matches the secret code you have written down.
The display will show REP to let you know that you
need to repeat Steps 5 through 7 to confirm your
secret code.
9. Press AM-FM and this time the display will show
SEC to let you know that your radio is secure.
The LED indicator by the volume control will begin
flashing when the ignition is turned off.

Jun 01, 2008 | Car Audio & Video

Not finding what you are looking for?
Car Audio & Video Logo

Related Topics:

69 people viewed this question

Ask a Question

Usually answered in minutes!

Top Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

4724 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

yadayada
yadayada

Level 3 Expert

63242 Answers

Are you a Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...