Question about Disney Electronics Single Disc Boombox, Classic Boombox

3 Answers

Disney pixar cars tv/dvd combo turn on but shuts off in minutes

My children own a 13inch disney pixar cars tv and the problem is that when they turn it on it only stays on for a few seconds or minutes and then shuts it's self off it does not have a timer set.

Posted by on

  • 3 more comments 
  • Anonymous Mar 25, 2009

    I have the exact same problem and can not seem to locate a number to talk to anyone at disney electronics. Have you found a solution yet?

  • Anonymous Apr 13, 2009

    Same here! It started doing it about 8 months or so after we bought it! It has gotten worse as it will only stay on for about 2 minutes. Cheap!!!

  • michellesri Apr 13, 2009

    Same problem here! It started turning off after we had it for only about 8 months or so. It has gotten progressively worse and will now only stay on for 2 min or so. Piece of junk. Kids are so bummed.

  • Ben Russell
    Ben Russell Apr 20, 2009

    I have the same problem here. I even let it sit for a couple months. Then the power stayed on for a half hour or so. But when I powered it back up, it would turn off again after a few minutes. It eventually gets to the point where it will turn off a few seconds after I attempt to turn it on (the screen won't even power up at this point).

  • Anonymous Apr 28, 2009

    This is just waste of money. don't buy it unless you need it to complete your child bedroom set.

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Ours did the exact same thing.. I Decided the remote thing was worth a try. I turned the TV to DVD (without a DVD in the player) pressed the set up button (on remote) and Restored the Default option. (Highlighted Default; highlighted Restore then pressed OK) Then exited the set up. I did this twice just to make sure, LoL well.. it's been on over 4hrs now with no problem.. seems like this fixed it.. hope it helps!!

Posted on Jan 27, 2010

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

One person had that issue right after buying it. It was a high voltage circuit that cost about $70 to fix. Sounds like you all have the same issue. You can see the review on amazon for the TV. Hope this helps you guys.

Posted on Apr 22, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

  • Expert
  • 136 Answers

Have you check the menu for a sleep timer. some remotes have this for tv's that when set it turns off the tv. some of the menu's have a time to have the tv come on and then shut off. you can have this do this once,daily etc. you might also go to their website for there support page to find the solution if this does not help

Posted on Apr 01, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My LN40C530F1FXZA give a massage that the USB 1/2 power overload, new device not found. also none of the HDMI are working. All other components work.


Just do a reset to this set, and then check. There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/
Service mode entry, adjust and exit procedure to many popular brand TVs are given. Never forget to exit the service mode, after all adjustments have been done.

Jan 12, 2017 | Samsung LN40C530F1FXZA LN40C530 40 LCD TV...

2 Answers

Onkyo AV TX-SR 500 turns on lights up but then shuts off continued by a clicking sound and blinks on and off. Will not stay on, what may by the problem and how can i fix it?


Check and replace the main digital board. It is faulty. In most cases main board replacement might be followed by a firmware update too. If you wish to get more details visit the site linked here.
http://electronicshelponline.blogspot.com/

Jan 09, 2017 | Onkyo Audio Players & Recorders

1 Answer

Pioneer media receiver pdpro6u shut off and won't turn on,now there is a blinking blue light


Check and replace the damaged component/s at its audio output stage circuit. An IC short or like that can cause this fault. If you wish to get some details; visit the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ Search the site by type in the "brand name" of your device, in the "Search box at the top right of the Homepage" to get gathered related posts.

Jan 08, 2017 | Pioneer Audio Players & Recorders

2 Answers

I have a Sony sound bar Model CT380. It has HDMI ARC and optical digital connections. The TV does not have these connections. What can I do to work around this?


How to connect a TV Sound Bar system to a television. - SONY

https://us.en.kb.sony.com/.../how-to-connect-a-tv-sound-bar-system-to-a...
Jump to If your TV has an HDMI terminal (without ARC) and an ... - Then connect theTV's Optical digital ... If your TV does not have HDMI input ...

2.1 ch Soundbar with Bluetooth ' HT-CT380 ' Sony US

www.sony.com/electronics/sound-bars/ht-ct380

Sony Corporation
Rating: 4.1 - ‎9 reviews - ‎$249.99
Discover the 2.1 ch Soundbar with Bluetooth from Sony & explore all the Sound Barsfeatures. ... filter higher frequencies to distribute audio smoothly around the room. ...against the sound bar to make an instant Bluetooth connection. No NFC? ... the HT-CT380 to allow data to pass through the sound bar straight to your TV ...

Dec 28, 2015 | Sony Audio Players & Recorders

1 Answer

I have a Toshiba Satellite A665-S6088. The last time I used it was last night and everything worked fine. It works with Windows 8.1, it has for a few months now, never had any problems until now. No...


Unplug the unit from ac power. Remove the battery. Wait a minute. Press and hold down the power button for 30 seconds. (Yes, I know, nothing will happen visible). Replace battery. Plug unit back in. Now try the power button and see if the unit resets. Sometimes this helps when all else fails especially with a computer which has "hung up" like yours. Let me know if this worked!

Aug 26, 2014 | Audio Players & Recorders

1 Answer

Why toshiba l305-s5945 media player not playing cd


Possibly it is in the wrong format. Download vlc media player, that will play anything and will let you know if the DVD player is faulty or bot.

Jun 14, 2014 | Audio Players & Recorders

2 Answers

Connect an active soundbar to a receiver


What if the soundbar is Bluetooth? Will I still be able to use that function and connect the active soundbar to the tv (Bluetooth) and connect the av receiver for other surround sound speakers? (they are pre-wired in the walls in the apartment I moved into)

Jan 08, 2013 | Audio Players & Recorders

1 Answer

I have a Shontek radio controlled clock. It ran fine for a couple of years, then the battery died. I install a new "Durcell" battery and it went through the motions of setting itself but was a...


Your radio should have come with a receiver of some sort for the radio signals to set itself. I had this same issue with my clock when the battery in the receiver died ... try replacing this too. It took me forever to figure out what it was because I had forgotten that it had its own radio receiver ... then once I remembered it existed, I had to find it, but replacing the battery fixed the problem. Hope that helps :-)

May 26, 2011 | Audio Players & Recorders

2 Answers

Headphones wont turn on


battery is toast get a new one anything electronic if u do not upkeep the charging it will die qwik

Dec 03, 2008 | Sony Bluetooth Wireless Headphones - Black

Not finding what you are looking for?
Audio Players & Recorders Logo

841 people viewed this question

Ask a Question

Usually answered in minutes!

Top Disney Audio Players & Recorders Experts

The Knight
The Knight

Level 3 Expert

71635 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

13241 Answers

Are you a Disney Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...