Question about HP PSC 1315 All-In-One InkJet Printer

3 Answers

Problem I've changed my ink but the light is still flashing

Posted by on

  • tonyryan1972 Mar 10, 2009

    no still not working. what do i do next?

  • tonyryan1972 Mar 10, 2009

    have done this, light still flashing. it is a supermarket brand not hp

×

3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 203 Answers

How old is the printer?
i had to replace the socket for the ink cartridge on my HP.
it kept showing no ink even with brand new HP cartridges.
i brought one from ebay for £10. PERFECT!

Posted on Mar 12, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,550 Answers

Check the cartridge is placed properly .

Also check the ink level is showing properly in system

First plug the printer to the computer .
Click on the "Start" menu button which is located on bottom left hand corner of your screen.
Click on the control panel icon.
Look for the printer/fax icon in the control panel window. Double click on the printer icon.
Find the icon for your printer in the opened window and right click on the icon. Now click on the "Preferences" option.
Look for the menu box pop up with tabs near the top of the box. Click on the "Services" tab.
Click on "Service this device." You will find the button on the Services menu that you just activated.
Click on the estimated ink level tab and a graphic will appear indicating how much ink is left in the cartridge.

Posted on Mar 10, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 10,594 Answers

Unplug printer from AC, replug back in and check.

Posted on Mar 10, 2009

  • 1 more comment 
  • Shahid Electronics
    Shahid Electronics Mar 10, 2009

    Please take out ink cartridge, clean contact pins in cartridge holder and make sure ink cartridge is fixed properly.
    Is it Original HP ink or aftermarket one?



  • Shahid Electronics
    Shahid Electronics Mar 10, 2009

    Please purchase HP ink cartridge to avoid such problems.



  • Shahid Electronics
    Shahid Electronics Mar 10, 2009

    Please check HP Support for details of light flashing.

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Orange ink light keeps flashing


HP Desk Jet 940c orange light flashing

Oct 01, 2014 | HP DeskJet 940c InkJet Printer

1 Answer

I've changed the ink cartidges but the black and color ink lights remain on and it won't print. I think the E2 error message is on.


This hapens when refilled cartridges are installed in the printer. To rectify the problem, look for the 'Resume button' normally black with a red circle around an arrow head pointing towards you. With the printer powered on, press and hold this button down for about 10 seconds. The error code will usually clear and the printer will print but the orange lights will still flash.

Sep 11, 2011 | Canon PIXMA MP160 All-In-One InkJet...

2 Answers

After changing the ink, the red light is still on.


epson stylus photo R200 printer the two red lights are flashing can get it to work help

Jul 18, 2010 | Epson Stylus Photo R200 InkJet Printer

1 Answer

Need to change ink catrege help


Using the printer's control panel In some circumstances, you may need to replace an ink cartridge before it is empty.
If the fonth.gif ink out light is flashing or is on, replace the empty ink cartridge as described in Replacing an Empty Ink Cartridge.
To replace an ink cartridge before the fonth.gif ink out light flashes or the Status Monitor notifies you that the cartridge is empty, follow the instructions in this section.
r_caut.gif Caution: r_space.gif Do not remove the cartridge from the printer until you are ready to replace it with the other one.
r_1.gif Make sure that the printer is on. The fontp.gif power light should be on, but not flashing.
r_2.gif Lower the output tray, then open the printer cover.
r_3.gif Press the fonth.gif ink button. The print head will move to the ink cartridge replacement position, and the fontp.gif power light will begin to flash.
r_space.gif r_note.gif Note: r_space.gif r_space.gif Do not press the fonth.gif ink button over three seconds. Otherwise the printer starts cleaning the print head.

Jun 13, 2010 | Epson Stylus CX6600 All-In-One InkJet...

1 Answer

Epson C46, changed coloured ink, won't print flashing red light


If the red light is flashing by itself, it means the printer thinks a cartridge is low on ink. Have a look at what the Status Monitor thinks (right click the printer Icon in the bottom Right-Hand corner and select Ink Monitor). This will show which cartridge it is. If it's the new colour cartridge, it means the cartridge is faulty (then replace it), or it is a refilled cartridge that hasn't had it's chip reset to "full". For this you will need a chip resetter, available on E-Bay very cheaply. If it's the black cartridge then replace it.

If both green and red lights are flashing, it usually means the Waste Ink Pads in your printer are saturated with ink and the waste ink "protection" counter has exceeded its limit. You can restore your printer to a working condition immediately by using the SSC utility - download from:

http://www.ssclg.com/epsone.shtml

Install it, and double click the ssc printer icon in the bottom right corner (System Tray). Choose Configuration and set your printer type (C4x), then close the ssc window. Now right click the ssc icon in the sytem tray and choose Protection Counter. You should see that the current count is above the limit; then choose reset to set it to zero. You will need to fib about having changed the waste ink pads! Turn the printer off then back on again. This will stop the lights flashing and restore normal operation.

However, remember that eventually ink will overflow from the waste ink area and make a dreadful mess, so you must change the waste ink pads before this happens. This requires the disassembly of the printer.

If you decide to have a go at replacing the ink pads yourself, report back and I will provide further help. It is a pretty simple job once someone explains how to get the case apart!

Mar 11, 2009 | Epson Stylus C46 InkJet Printer

1 Answer

Cartridge holder won't move when i press button to change ink


Hi, it's not ready for a replacement cartridge yet, the printer is only LOW on ink not OUT of ink. continue to use the printer until the flashing red light remains on solidly, then the head will move to the replace cartridge poswition when you press the button.

Feb 12, 2009 | Epson Stylus Multifunction Inkjet Printer/...

1 Answer

Changing ink carthrige


hi try to clean the contact point of ink and ink carrier.if it's not work 2 thing you need to consider....

1.maybe your ink is not compatible or not detected..
2.maybe your ink carrier is most likely defective.

hope this would help you...

Oct 27, 2008 | HP DeskJet 820cxi InkJet Printer

1 Answer

Epsomc44ux red and green light fashing does nothing


If both lights are flashing, it means the Waste Ink Pads in your printer are saturated with ink and the waste ink ("protection") counter has exceeded its limit. The Waste Ink Pads should be replaced as soon as possible. You can overcome this problem temporarily by using the SSC utility - download from

http://www.ssclg.com/epsone.shtml

and reset the Protection Counter. This will stop the lights flashing and restore normal operation.

However, remember that eventually ink will overflow from the waste ink area and make a dreadful mess, so you must change the waste ink pads before this happens. This requires the disassembly of the printer. A copy of the service manual is available from a number of sellers - just Google "Epson C44 Service Manual". You will often find them for sale very cheaply on E-Bay. Note, however, if you can find or borrow any of the C40,42,44,60,62 service manuals, as far as ink pad replacement goes, they are the same.

Oct 16, 2008 | Epson Stylus C44UX InkJet Printer

1 Answer

Change printer ink


Turn on the printer.
lower th epirnter's output tray, pull out the extension, and open the cover.
press and release the ink button.
if your ink lights is on or flashing, the printer head moves to the left, and the cartridge that need to be replaced stops under the ink out mark.
open the cartridge cover
Pinch the back tab of the empty cartridge as your left it out of the printer.
shake the ink cartridge 4 to 5 times while it is still in the package.
unwarp the new ink cartridge and lower it into the holder. Push down gently until the cartridge is firmly seated.
repeal the procedure if more than one ink cartridge is out.
close the cartridge cover.
close the printer cover and press the ink button.
The green power light flashes and the printer makes noise. charge takes about a minutes. When it's finished, the green power light stops flashing and stay on, and the red ink light should go out.

Oct 10, 2008 | Epson Stylus C66 Photo InkJet Printer

2 Answers

HP DeskJet 722c orange ink light flashing


Try changing the color cartridge. Also it is a good idea to clean the electrical contacts if it looks dirty.Use slightly damp(use water only) q-tips .
Hope this helps

Mar 27, 2008 | HP DeskJet 722c InkJet Printer

Not finding what you are looking for?
HP PSC 1315 All-In-One InkJet Printer Logo

Related Topics:

23 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Printers & Copiers Experts

kakima

Level 3 Expert

96627 Answers

k24674

Level 3 Expert

7987 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a HP Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...