Question about Maytag MDB4621A Built-in Dishwasher

1 Answer

Power to washer but will not turn on no lights or nothing

Posted by on

  • skellogg43 Mar 10, 2009

    how do you test the fuse tco

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 108 Answers

Make sure the door latch is working properly. If the latch isn't latching, then it won't turn on.

Posted on Mar 10, 2009

  • StanStihl Mar 10, 2009

    First I should ask, do you have an ohm/volt meter?

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No control panel lites. Washer started then stopped as if power shut off.


Hello John - Let's try resetting the dishwasher by either unplugging it or flipping the household circuit breaker to the off position. It is important to wait roughly ten minutes and then turn on the unit. Confirm that the door is properly latched and try selecting a cycle. If resetting the power does not correct the issue, it could potentially mean a number of things: a potential wiring failure, damaged cord, faulty door latch assembly or control board. Because it could be a number of any one of several underlying causes, I would recommend contacting a professional to properly diagnose and repair the unit.

Jul 03, 2013 | Frigidaire Dishwashers

1 Answer

Dishwasher will not run. Air Dry/Lock on light blinks and unable to turn off even if held for 4 seconds. If you press Start, "Quick Rinse" light comes on and blinks along with the Air Dry Light....


Sound like you might have a fallty drain pump. When you turn the power off and started again, did you hear noise of pump draining the leftover water. If not , then you have a pump problem. Need a service man. Good luck !

Feb 11, 2011 | Kenmore 16602 / 16604 / 16609 Built-in...

1 Answer

ADP 8450 Since a power outage I am now unable to switch my dishwasher on. The light flashes and it makes some sound but then nothing happens.


If this happened after a power outage just turn off the breaker to the washer for 2 hours, this will reset the unit to factory settings.

Jan 17, 2011 | Whirlpool Dishwashers

1 Answer

Won't turn on


Try just pressing the selection pad, without pressing start/cancel and close the door. That has worked for me a couple of times.

May 05, 2010 | Frigidaire Professional Series 24 in....

1 Answer

We have Frigidaire 24 in. FDB1050REC dishwasher. The control panel has no power; no lights and nothing works. This problem started after a power outage. All circuit breakers in house ok and other outlets...


more than likely fuse is gone in plug. take dish washer out. change fuse in plug. if it doesnt work get extension lead and run it from a socket that definatly does work and plug washer into that. if nothing then its internal.

Jan 16, 2010 | Frigidaire 24 in. FDB1050REC Stainless...

1 Answer

No power, no lights, nothing


Hi,

i prefer to suggest you that bring your washer to a service center because in your situation it is very difficult to find waht is the real problem of your machine they need to open it up for you to figure it out if some faulty wirings or the machine itself is the problem.

thanks,

May 21, 2009 | Dishwashers

1 Answer

Washer not cycling


I manually turned the impeller on the motor and "broke it loose". I found out if you don't use the washer for even a small period of time the motor may do this.

Jul 25, 2008 | GE 24 in. GSD2220Z Built-in Dishwasher

Not finding what you are looking for?
Maytag MDB4621A Built-in Dishwasher Logo

Related Topics:

114 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Dishwashers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Mike

Level 3 Expert

4332 Answers

Are you a Maytag Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...