Question about Nortel Meridian M7208 Corded Phone

1 Answer

NONE OF THE BUTTONS WORK WHEN PRESSED - Nortel Meridian M7208 Corded Phone

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 43 Answers

Unplug the phone for a few seconds then plug back in. Do you see the time and date on the display? If not try a phone you know works fine. If the other phone works fine and the original phone is still having problems then you will need to replace the original phone. If both phones have the same problem there is an issue with the port on the phone system and you will need to call technician to the site to troubleshoot and repair. Let me know if you have any questions.

Mark

Posted on Mar 10, 2009

  • daniel marineau
    daniel marineau Nov 06, 2013

    I have the same problem. It happened after I press feature * and a number I can't remember. Is there a code to reactivate the keypad?

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Panasonic KX-T7030 telephone system: the buttons don't work!


I have not seen this in a long time. 'Way back in
the 1970's a similar problem would occur when the
telephone company accidently reversed the 'tip and
ring' wires. This was only a problem with the
then-new "push button" (tone) dialing, the standad
rotary dials worked fine. The fix was to reverse
the red & green station wires in the "B-block"
(on the baseboard) to undo the central office goof.

Maybe it still happens? Try reversing the red &
green wires in the modular (wall) socket you are
plugging the base ('main unit') into.

Good luck!
--

Apr 24, 2016 | Phones

1 Answer

Dial tone nortel phone


It\'s in system programming: feature CONFIG, Terminals & Sets, enter ext #, Prime Line: set to I/C (for intercom dial tone) or Line xxx. It is probably set to None based on your description.

Aug 26, 2014 | NorStar T7316E Corded Phone

1 Answer

Nortel M7208 will not dial


A button may be stuck on the dial pad. Check all buttons to ensure they are free and none of them are stuck.

Feb 11, 2014 | Nortel Phones

1 Answer

Phone is blinking when it stops none of the buttons seem to work and it says no line selected on my M7310


When the it is blinking the phone is resetting. There are several reasons for this. Once the blinking stops and Date & Time appear, your phone should be operational again. Check the buttons for programming by using Feature *0 and pressing any button to verify it is programmed. If not you might have a bad phone. Try swapping phones with a working one of the same type. This will tell you if your phone or port are in trouble by where the trouble goes.

Feb 05, 2013 | NorStar M7310 Corded Phone

1 Answer

The message lamp is staying on - when you press messages there are none - the system automatically dials another extension. how do I solve this please?


It's supposed to. On your phone you have a button called MESSAGE. It's what sets up message waiting. So does the digit "4" after you call someone on the intercom (oops). Try it. Call someone on the intercom and while their phone is ringing, press "4". Listen to your set and look at the display!

To clear those, press MESSAGE on an idle phone. Look at the display. It will tell you who the message is from and one of the soft keys (3rd) will be CLEAR. Press it and the message(s) will go away one at a time. *700 plus your own extension will also clear ALL messages at once. (There are a whole bunch of other MW commands like *701 and *702, but the button replaces those). They work great on Single line sets in motels....

Carl

May 21, 2010 | Panasonic KX-T7630 Corded Phone

1 Answer

Intercom issue


Those are 2 very different questions. Since you both have display phones, look at them. A 7731 on a TA system changes state with the * button. There are 3; Extension, Time, Time & Date.

When she calls you, your Auto Answer button is probably lit. Press it so it turns off and haver her call you again. It should ring, but not always. The button can control a couple of things, according to programming. Now, have her press her AA button until it lights. Now call her. Voice call?

If none of this works, please provide your cabinet model number. It's listed on the side of the cabinet where all the phones plug in.

Carl

Jun 09, 2009 | Panasonic KX-T7731 Corded Phone

1 Answer

Norstar M7310 Phone's Buttons Don't Work At All


What system is this on? Sounds like the system is going downhill.

Nov 18, 2008 | NorStar T7316E Corded Phone

1 Answer

BUttons are not working


You need to go into programming use mmc 722 . Type the ext # you are having a problem with and the press the btn that is not working. If it says none , you have to program it for what you want it to do. (i.e. ds for direct stn select)

Mar 04, 2008 | Samsung Phone PDCSLCD12B

5 Answers

My intercom button flashed red to green. When I push a line button, I get a two-tone beep but no dial tone. I changed the internal 9 v battery. I unplugged the phone and waited, then plugged it back in....


Each telephone must be connected to line 1 and line 2 for
proper operation. The remaining lines 3 and 4 may — or may not —
be connected to each station as you desire. First plug in the battery, then the phone lines (1 & 2 are mandatory), and third the power cord. If your intercome LED is blinking red and green, then press: STORE IN, followed by "INTERCOM" followed by a free intercom# (i.e., any of the memory buttons 1 through 16 not already assigned to another telephone set). Then wait for the phone to go through its initiation sequence during which it searches each of the four possible lines. After that concludes, you should get dial tone on your active lines. :-) Marco

Aug 29, 2007 | GE 2-9450C Corded Phone

Not finding what you are looking for?
Nortel Meridian M7208 Corded Phone Logo

Related Topics:

284 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nortel Phones Experts

kakima

Level 3 Expert

96333 Answers

Cindy Wells

Level 3 Expert

4751 Answers

David Burbee
David Burbee

Level 2 Expert

1868 Answers

Are you a Nortel Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...