I cannot remember how to pair BlueAnt bluetooth to new devices

On the iPhone, go into setting, then Bluetooth and select find new devices. On the BlueAnt, put that into pairing mode- Press and hold the green button on the BlueAnt until lights on the device blink red and blue.
When you see BlueAnt on the list of devices on the iPhone, select that. The code is 0000 and then it should pair.

On your phone, make sure bluetooth is turned on (settings, general).

While your phone is in discovery mode, turn your bluetooth device on and put it in discovery mode (usually you have to hold the power button for 7-10 seconds).

Your phone will find the device, and you will be prompted to enter the devise's PIN number (often 0-0-0-0). Your phone should pair with the device then.

First off the device you are referring to is a ST3 and not a Z9. What you need to do is put the device into pair mode prior to searching in your iphones bluetooth menu, to do this with the device off hold down the green button until you hear a language loop. When you hear the language of your choice let go of the green button and press it once right away. You will hear a message about your phones bluetooth menu, when you hear that go to your Iphones bluetooth menu and select the ST3 and it should work.

Regards,

Rylan

With the device on press the MFB and when it says say a command say pair me. Then go to settings/general/bluetooth on the iphone and make sure bluetooth is on. The Q1 will show up click it and wait, the iphone will take care of the rest. (remember you won't be able to voice dial unless you have the iphone 3gs or iphone4.

Rylan

How to connect or pair a Blueant Bluetooth handfree.

1. Switch off the Blueant:
i.e. push the microphone inside the Blueant.

2a. Press and hold the GREEN telephone symbol (or Accept) pushbutton
On the Blueant flat face for 8 seconds. (this makes unit go into “pairing” mode)

2b. at the same time switch Power On to the Blueant by pushing out
the microphone on the side of the Blueant.

3.The Bluetooth Indicator will turn a blinking red/blue,
when you see this, release the Accept Button .
The Blueant is now in “pairing” mode.

4. Get you mobile in Bluetooth search mode to pair with a new device.

5. The Blueant will request your mobile device for a password.

6. Enter the password= 0000 , the devices now will be paired.

7. Set the Blueant as a trusted/authorized device, if this is option in your phone.
For more detailed information download the Blueant manual from the link below:
http://www.blueant.com.au/knowledge/manuals.php
I hope it helps.

How to connect or pair a Blueant Bluetooth handfree.

1. Switch off the Blueant:
i.e. push the microphone inside the Blueant.

2a. Press and hold the GREEN telephone symbol (or Accept) pushbutton
On the Blueant flat face for 8 seconds. (this makes unit go into “pairing” mode)

2b. at the same time switch Power On to the Blueant by pushing out
the microphone on the side of the Blueant.

3.The Bluetooth Indicator will turn a blinking red/blue,
when you see this, release the Accept Button .
The Blueant is now in “pairing” mode.

4. Get you mobile in Bluetooth search mode to pair with a new device.

5. The Blueant will request your mobile device for a password.

6. Enter the password= 0000 , the devices now will be paired.

7. Set the Blueant as a trusted/authorized device, if this is option in your phone.
For more detailed information download the Blueant manual from the link below:
http://www.blueant.com.au/knowledge/manuals.php
I hope it helps.

I had a problem with this also, try this.

Turn off both devices then turn on your phone.
make sure your bluetooth option is "ON" on your phone
turn on the blueant z9i
press and hold both volume buttons, while doing that, press the ANT button.
Your blueant should be flashing fast right now and your iphone should be able to find it.
complete the pairing by selecting the blueant headset on your iphone and enter the code "0000"
enjoy

BlueAnt has a website that tells you step by step how to pair. I followed it and was successful. Thank you for your interest.

Go to this page, it will answer any question concerning the blueant .. including pairing to your phone .. activating your blueant etc http://www.blueant.com.au/index.phpalso gives you step by step instructions on codes, pairing etc

click on "settings"
click on "General"
click on "Bluetooth"
If Off, click it ON
It should start searching for devices to pair with (make sure your other device is on and "discoverable")
If the iphone locates the headset it should prompt for the code.