At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hi Rajen samani! Most mercury motherboards with a nine pin front panel connection use the following configuration. You may want to double check to make sure that your motherboard follows this configuration. Just go to http://www.mercury-pc.com/downloads.php, enter your model number, and you'll be able to download the manual for your board. The jumper configuration should be in a section labeled "Front Panel Connection" or something similar. Hope that Helps!
You dont need to configure any usb ports if the usb ports are enabled in BIOS all the usb ports will be activated automatically(front and rear). If still you want to check, go to BIOS and check if they are enabled.
If your main board does not have one of these connector then you do not support SATA. If it does make sure you connect the drive in SATA0 or SATA1 what ever is the lowest. Also SATA does not require any jumper configuration.
×