Question about Computers & Internet

1 Answer

Billion Mygaurd 7202G modem,If I need drivers for my Modem would it work on my Dell Dimension 3100 PC using Ethernet cable,problem is I cant set up wirelessly and I was told I need drivers ? but Billion dont supply Drivers for this model.If computer connects to Internet OK with Ethernet cable Computer should have drivers you would think or maybe U need them for wireless set up,Thanks in Advance.

Posted by on

  • jaegerdwp
    jaegerdwp Mar 10, 2009

    thanks,but when I go to save file Widows says cant open because it doent know/recognise this file? what program do I open it with ? Which program should I chose this does this for only a few downloads,and the windows site(to do automaticaly) never works

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 611 Answers

Http://www.findmysoft.com/drivers/Billion-BiPAC-7202G-1-09-firmware-driver.html

try this driver first download it then upload in the modem then re-configure it then you get it

Posted on Mar 10, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I got a NETGEAR router and I have been trying to get my Motorola SURFboard to recognize it. I had the USB connection installed and the NETGEAR uses ethernet, so I tried to install the ethernet but my...


The Cable modem must be disconnected from the computer. You cannot use USB and Ethernet at the same time.

1. Turn off power to the Cable Modem and the Netgear Router. Do the same with the computer.
2. Connect an ethernet cable from the modem to the router's WAN (Internet) port.
3. Connect another ethernet cable from one of the remaining 4 LAN ports on the router to the computer's ethernet port.

4. Now power on the Cable Modem ONLY. Wait for the modem to sync up with your service provider
5. After about 2-5 minutes power up the router and wait about 1-2 minutes.
6. Now power on your PC.

Check and see if you have internet access. If not you may have to uninstall any cable modem software related to USB connection. if this is the case, then you may have to repeat steps 4-6.

Since most cable internet providers do not use proprietary connection settings, your internet connection should be up and running without changing any settings in the router or modem.

If this does not resolve your issues, we can continue to work with you.

Nov 29, 2010 | Arris SURFboard® SB5101 Cable Modem

1 Answer

Cable Modem is not being recognized


If it is a dell you can get the driver from there web site. Type in the service atg number and it will give you all the drivers for your machine Dell.com

May 03, 2010 | Dell (313-3460) Cable Modem (W8378)

1 Answer

I lost the disk for the RCA DCM425 digital cable modem the cable company gave me. how can i get the modem to work on my new computer?


Hello Friend,
If you didn't change anything in modem side, that means the modem is still connected to internet. in this case you can connect the modem to your computer via the Ethernet cable. with this cable you will not need to install anything on your computer, just plug the Ethernet cable to the RJ45 port and start browsing internet.
The only case when you will need the drivers is when you want to connect the modem to your PC via USB cable.
Here is a link where you can find everything about your modem: quick guide, user manual, usb drivers ...
Best Regards,

Oct 30, 2009 | RCA DCM425 DIGITAL CABLE MODEM (RCADCM425)

2 Answers

Trouble connecting netgear wireless router to rca modem DCM425


First try connection the Yellow ethernet cable from the rca modem to your computer's network connection. If you get a connection this way, then your modem will work with a ethernet cable. If not, then call Comcast for help. The modem ethernet out to computer port must be connected to the wan line of the router. Then you can connect an ethernet cable from your computer network connection to one of the 4 ports of the router. For wireless connections you must set up the router and wireless adaptor with the same settings to connect. Follow the routers directions.
Good Luck

Jul 10, 2009 | RCA DCM425 DIGITAL CABLE MODEM (RCADCM425)

1 Answer

Ethernet cable does not fit


The modem jack is too small because it is for a phone line connection not an ethernet connection. If you want to get online by dial-up, you need to connect modem to a phone line. Ohterwise look for another input jack on the laptop that the ethernet cable will insert to.


Your responses are intended to improve the level of service provided. Please show your appreciation by rating your experience.
Thank You.

Dec 10, 2008 | Dell Latitude CP 56K PCMCIA Modem Card (PC...

1 Answer

Toshiba Cable Modem PCX1100u


OK. First of all you do not need a special or seperate driver for the Ethernet port. Its factory loaded with your OS.

All you need to do is plug the Ethernet cable into the LAN port on your HP Desktop and then into the LAN port (not the WAN port) of your cable modem.

The second thing is if its only a cable modem, then I suggest you proceed with caution as there is NO built-in firewall on a cable modem. Yes you will get on the net, but you are likely to be attacked with virus the moment you connect. I suggest you check very carefully whether the cable modem (if that's what it is) does/does not have a firewall as you would be very unwise connecting up like that.

Next, forget USB connection to the router/cable modem. That technolgy we've moved on from.. Your Vista shodul be 'plug n play' adn should configure the router for you. obviously that bit isn't so slick on yours.

Let me know how you get on..

Aug 31, 2008 | Toshiba PCX1100U High Speed Cable Modem

5 Answers

Ethernet vs. usb


FYI for those people trying to use a ethernet and usb cable from a cable modem - it may work for a while but it won't work forever - your ISP will only allow one IP address out of the modem unless you pay for additional addresses (then you need a switch). Each device you have on the modem is fighting for that IP and eventually it will just quit working (if it works at all).

If you want more than one computer on your network (on the Internet or sharing printers/files, etc) then you need a router or a gateway (cable modem/router combo which I DON'T recommend).

Feb 09, 2008 | RCA Thomson Digital Cable Modem (DCM305R)

2 Answers

Need to hook up Belkin G wireless router to Motorola SB5120


Plug your cable line into your modem, make sure it's tight, but don't use a tool. Next plug the ethernet line from the modem to your PC ethernet port. Then plug in your power to the modem. Allow your modem to sync. Don't use the USB line at all. Do not even hook it up unless your computer doesn't have a working ethernet line. Don't run the disk either, it will only install the modem driver that is only used if you use USB.

If you have issues connecting after that, you may have to go into your ethernet adapter settings and make sure that it is using DHCP. DSL usually uses a different setting (PPP I think) and you will not be able to connect.

By the way, excellent choice in modems.

Jan 14, 2008 | Arris SB5100 SURFboard DOCSIS 2.0 Cable...

1 Answer

My Mdoem's ethernet and usb lights are off


assuming you using ethernet to connect the pc to the modem: how about checking your ethernetLAN card on the pc if it's integrated with the motherboard you can enable it from the bios settings if it's an expansion card it sounds like you need the most up to date driver which can be downloaded from the card manufacturer's website if you have access to internet on another pc. assuming your pc is connected to the modem via usb: reinstall the driver for the modem . another thing you can do is buy a usb to ethernet adapter which are available for under $5 on the market one end connects to the usb port on your pc and the other end is ethernet and this should work .

Aug 10, 2007 | NetGear DM602 ADSL-Modem

1 Answer

I can't get my computer on the internet . I am using windows xp and the modem will not get the internet on the dell computer


Hi, This modem can be used via one of two ports: ethernet port (network port) or USB port If your computer has an ethernet port, it is perferable that you connect through this as you will have better performance. If you don't then you can get an ethernet card installed inside the CPU. If it's not possible to connect via this connection and you have to use the USB, then you will need drivers. This website gives you full instructions on how to use this particular modem and also gives you the USB drivers if needed. http://www.triadtwcable.com/template_media/cablemodems/rca245.htm Good luck! Lolita

May 08, 2007 | RCA DCM425 DIGITAL CABLE MODEM (RCADCM425)

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

143 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

kakima

Level 3 Expert

98829 Answers

David Payne
David Payne

Level 3 Expert

14071 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...