Question about Kenmore Oasis HE 27082 Top Load Washer

1 Answer

Kenmore Oasis HE shuts off during wash cycle and gives F1 error

Have to power off and re start several times to begin wash again

Posted by on

  • jrush34 Mar 15, 2009

    I am receiving the same error code. We have to turn off and back on two or three times at the beginning and again when the rinse cylce starts. A friend of mine said that there is supposed to be some papers on the inside of the control panel that will tell you what the error is but mine doesn't have one.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 126 Answers

F1 error means the main control computer board. see other posts in this section as there are many who are complaining about the same problem. buying the new board (revised) will solve the F1 problem, but other problems will soon crop up on this POS washer. if you have the chance to return it to sears, return it immediately!!!!

Posted on Mar 16, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hl72a650


color wheel issues replace light engine

Jul 07, 2013 | Televison & Video

1 Answer

Whirlpool WFW9050XW Washer Front Load


Disconnect your mains from the wall and clean out your filter.
Pl click if helped.

Apr 28, 2013 | Whirlpool Washing Machines

1 Answer

Hello, I have the Asko W6761 and all of a sudden it doesn't run the cycle anymore. It starts normally, i.e. pumps water into it, but then it doesn't start to wash..any idea what this could be? After a few...


Hello, my W6761 becomes the same. When it happens, you can clear the problem by "soft ware reset". Following is the procedure:
1. Power it on
2. Push Start/Stop buttom 5 times
3. Push "Enter", ">", "<", "Menu" buttons (from right to left)
4. Again, push "Enter", ">", "<", "Menu" buttons
5. Wait for 30 seconds that the above soft ware cycle resets the internal status
6. Toggle the power switch
7. You need to execute above "soft ware reset" within 15 seconds

Start washing and check to see if above reset the problem.
If it does not begin to work, repeat above "soft ware reset" cycle until it begins to work.
My W6761 once needed to repeat above cycle 7 times to solve the problem.
W6761 seems to be weak at high ambient temperature.

Tsunett

Oct 26, 2010 | Asko W6761 Front Load Washer

1 Answer

The F! error code keeps coming up when I start my washer


F1 means communication error, the best thing to do is unplug unit for 2 mins and try again

Jan 14, 2010 | Whirlpool Cabrio WTW6600SBT Top Load...

1 Answer

Item: Whirlpool Ultra Dishwasher Age: 3 yrs Problem: Not enough water to effectively wash the dishes. State: When the dishwasher is started, the fill valve opens as normal. Only about 1/2 the amount of...


Larry,
The float is generally for overflow conditions and will interrupt power to the fill valve solenoid.
If you are not filling completely in the time allowed by the timer, it is most likely a flow restriction in the water supply. Barring other obvious restrictions, the fill valve has filter screens on the inlet side of the fill valve, which is generally the cause of your symptoms. Be careful if you attempt to clean the screens, as the fill valves are very sensitive to debris, and can become stuck open if sediment gets past the screen. I usually replace the fill valve to avoid future problems.
Hope this helps.

Oct 30, 2009 | Whirlpool GU2400XTP Built-in Dishwasher

1 Answer

Can't restart cycle


have you tried unplugging for a short time and holding power button down before plugging back in? if you have and it still doesn't work suspect door latch or control bd

Aug 09, 2008 | Whirlpool Duet GHW9150P Front Load Washer

Not finding what you are looking for?
Kenmore Oasis HE 27082 Top Load Washer Logo

Related Topics:

188 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Ron Lankford

Level 3 Expert

5383 Answers

Archaeology
Archaeology

Level 3 Expert

662 Answers

reliableservice

Level 2 Expert

313 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...