Question about Whirlpool LSB6200KQ Top Load Washer

1 Answer

Whirlpool lsb6200kqo ultimate care II washing machine does not agitate or spin. It makes a loud steady noise but no movement. We checked the motor coupler and this is ok. All looks intact and in good condition visually. It you press the lid switch the noise starts and it does stop when you let go. Repair?? or Replace?? Anyone know what this could be?

Posted by on

  • Vanessav Mar 31, 2009

    Whirlpool LSB6200KQO does not agitate or spin. It makes a loud steady noise but no movement. Everything seem to be in tact (visualy). Water enters the machine, it drains perfectly without a problem but there is just no movement. How do I fix this?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Whirlpool Master
  • 2,651 Answers

Ummm really soundslke a motor coupler issue, although it appears to be in tact perhaps the slotted ends have rounded out orhave a crack so when torque ofthe motor is applied it slips past causing hte noise. soundslike the motor is running??? and will drain water ??? thiswill provethe motor is runningif drains water..

Posted on Mar 10, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

I have an lsq9010 and it won't spin, it just makes a loud noise. what could the problem be


Hi,
The problem might be motor is short circuited kindly replace the motor to solve your problem

May 17, 2010 | Whirlpool Ultimate Care II LSQ9564J Top...

1 Answer

Washer agitates off balance and makes a loud banging sound until movement stops at the beginning of rinse cycle, advice?


If it makes this noise in the agitate mode and not during the spin cycle, I would suspect that the transmission is going.

Jan 03, 2010 | Whirlpool Ultimate Care II GSW9650LW Top...

1 Answer

My ultimate care II washer spin cycle stopped working. The motor makes a loud noise. The agitator no longer turns.


http://www.youtube.com/watch?v=WLPGs2UMUJc

Replace the direct drive coupling between the motor and transmission.

Jun 22, 2009 | Whirlpool Ultimate Care II LSQ9549L Top...

2 Answers

Loud while agitating


CHECK COUP-LER BETWEEN MOTOR AND GEARBOX.if coupler good,then gearbox bad.

Feb 12, 2009 | Whirlpool Ultimate Care II LSQ9564J Top...

1 Answer

Whirlpool Ultimate Care II LSQ8543JQ0 WON'T SPIN


really sounds like a coupler issue. May look fine but if one of the teeth are busted it will do this. You can get a tutorial for fixing this here. http://www.shop.washermd.com/category.sc?categoryId=4

Jan 06, 2009 | Whirlpool Ultimate Care II LSQ9564J Top...

1 Answer

Won't spin or agitate


coupling.between motor and gearcase.

Nov 11, 2008 | Whirlpool Ultimate Care II LSQ9549L Top...

Not finding what you are looking for?
Whirlpool LSB6200KQ Top Load Washer Logo

426 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...