i need to clean the inside glass on my maytag oven
Comments:
Mar 10, 2009
- Many thanks for your solution but I actually wants to clean between the glass on my oven door.I tried but could not get the door handle off.Hope I can get some advice on this one .
Thanks.
About a 4 inch square in the center of the broiler does not burn after lighting. We have self...
(More)
About a 4 inch square in the center of the broiler does not burn after lighting. We have self cleaned the over for 4 hours but that did not help. It has been taking a long time to light but we think the igniter is going out since it takes a long time to light. We are replacing that but also noticed the broiler was not cooking even and then noticed that a large square in the center of the ceramic plate was not burning after the broiler lit.
Bought the stove in 2005 when we build our home. Had to have a switch replaced in 2007 to broil. ...
(More)
Bought the stove in 2005 when we build our home. Had to have a switch replaced in 2007 to broil. The stove is not broiling again
when i select bake to preheat oven the bake element does not glo on only the broil burner. then when...
(More)
when i select bake to preheat oven the bake element does not glo on only the broil burner. then when it reaches temperature it does not hold heat.please help. i have replaced the bake element and that did not solve the problem
I have a similar problem with thr F1 warning alarm that goes off at all hours of the day and night....
(More)
I have a similar problem with thr F1 warning alarm that goes off at all hours of the day and night. The oven and range top work, but the alarm is driving us nuts. This happened last year and the technician could not fix the problem unless the alarm was actively beeping. Apparently the F1 code means it could be one of two things. Last year I had the circuit board replaced for around $400 and a year later the same problem! I now keep the circuit breaker off until I need to use the oven/stove and then turn the circuit breaker back on. The alarm is most annoying and when I contacted the manufacturer I was told there is no way to shut off this error alarm. Eventually, the alarm will keep going continually and I will contact the technician to replace the part. However, I do have to say that I hear a clicking sound - like the stove is trying to light - when the circuit breaker switch is turning back on.