Question about Sony Grand WEGA KDF-50WE655 50" Rear Projection HDTV

1 Answer

55 sony grand wega

I replaced the lamp and now the tv wont turn on

Posted by on

  • 3 more comments 
  • sunflower258 Mar 09, 2009

    power is blinking red

  • Anonymous Mar 18, 2009

    That was the solution! thank you!!

  • Anonymous Mar 25, 2009

    i have the same Problem

  • bruiser10 Apr 03, 2009

    I just changed the lamp and the power standby light is flashing 3 times red .

    Any help would be much appreciated..if this is an access door not seated properly, could you tell me what an access door is?

  • maximus30 Apr 10, 2009

    I tried it still red blinking light anything else i can try

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,234 Answers

The most common cause of this is the access doors not being seated correctly. Please try and reopen and close all of the access doors. There are interlocks that need to be activated in order for the set to turn on.

Also, the indicator lights on the front should be blinking a code to indicate if the problem is the door, lamp or fan. Please post any lights that are present if the reseating does not resolve the problem.

Thanks,
Dan

Posted on Mar 09, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Tv not turning on


Ur tv,projection lamp been use alot about 2 years or more?The lamp must replaced the lamp life span it over.

Apr 05, 2010 | Hitachi 60V500 60" Rear Projection...

1 Answer

Tv wont turn on


It does sound like the lamp is your problem. You can remove it and inspect it visually for obvious signs of failure. Usually you will see that the arc tube, the glass tube down the center of the lamp, has shattered. Clean out the broken glass from the lamp compartment carefully before replacing the lamp.
Good luck.

Nov 28, 2009 | Sony Grand WEGA KDF-50WE655 50" Rear...

2 Answers

The tv will turn on but no the screen wont. and


Replace the lamp would be the first thing to try. Lamp door switch on this model is notorious for going bad. If you replace lamp and still won't turn on jumper door switch. If you take off back you can see switch board.

Nov 21, 2009 | Sony KDF-E50A10 50 in. LCD HDTV

1 Answer

Replaced lamp on WD57731. green light turns on then a ornage light, under lamp blinks


Please put back lamp cover, the last plastic grille that were removed to replace lamp in TV.
TV sense that lamp cover is not either put back or not fixed properly so it wont turn On. Check lamp cover and problem will be solved.
Thanks.

Nov 14, 2009 | Mitsubishi WD-57732 Projection Television

2 Answers

Wont turn on and lamp has been replaced.


You most likely have to reset the lamp timer. If it gets maxed out it will not turn on till it is reset. Check your manual to see how to reset.

Sep 12, 2009 | RCA Scenium HDLP61W151 61 in. HD-Ready...

1 Answer

Replace bulb tv wont turn on


make sure the lamp and lamp door are seated properly. does it blink any codes. 3 blinks is lamp or lamp door not seated properly

Jun 25, 2009 | Sony KDS-60A2020 60" HDTV

2 Answers

Tv not turning on


I also have this model. A few months ago, when I turned on the tv, it told me my lamp was in need of replacement. just yesterday, my tv did the same as you....the blue light flashed and then the lamp light kept flickering. All I can say is your lamp needs to be replaced.

Mar 19, 2009 | JVC HD-56G657 Television

1 Answer

I have replaced the lamp.Now the lamp wont come on and tv shutts


Did you replace the lamp cover after replacing the lamp? Make sure the cover is properly installed.

Jan 21, 2009 | Sony Grand WEGA KDF-50WE655 50" Rear...

2 Answers

Tv wont turn on has a funny noise


You likely have a bad lamp. It could also be a bad lamp driver, but I'm betting a lamp change will solve your problem. Buy an original Sony lamp only; the aftermarket replacements are cheaper but you get what you pay for and they can cause problems. Please be sure to rate this solution. Thanks!

Nov 07, 2008 | Sony Grand WEGA KF50WE610 50" Rear...

1 Answer

My 60" lcd projection tv wont turn on sometimes and throws a lamp light, and if i watch tv for a while and turn it off it wont turn back on and throws the red lamp light


The buzzing sound you most likely hear is the ballast trying to fire up the lamp. I would say replace the lamp and yes they can act up at will. If this is the first lamp replacement ever then you are doing good.

Feb 01, 2007 | Hitachi 60V500 60" Rear Projection...

Not finding what you are looking for?
Sony Grand WEGA KDF-50WE655 50" Rear Projection HDTV Logo

Related Topics:

146 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

kakima

Level 3 Expert

102366 Answers

The Knight
The Knight

Level 3 Expert

72640 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...