Question about Microsoft Windows Vista Home Basic for PC

1 Answer

When I try to open a Power Point Show in email, it starts to load, then displays ''setup controller error'' which, when I delete the error, plays the pictures without sound. What to do??? I am running Vista home basic on a Toshiba Satellite notebook. Thanks, John

Posted by on

  • tedbear187 Mar 12, 2009

    While it is true that the preloaded Office 2007 is incomplete, both Power Point viewers-2003 and 2007- are stand alone functions. I have in stalled the complete Office 97, but the partial pre-loaded 2007 keeps taking it over and, of course, screws up that process, too. I have tried the extensive directions to delete all of the Office 2007 components, but without success. I guess I am out of ideas. Thanks.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 513 Answers

The mircosoft office is not complete, when u start it it looks for the rest of files that are in the cd when it doesnot find them it gives error but it open, you should reinstall the full version of microsoft office and u will have no problem.let me know if you need the cd.

Best Regards

Posted on Mar 09, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My washer error message unit detect a problem


The most common solution for this message is to turn the machine OFF and then ON. If the error resets, you are done.

However, this message will sometimes cause the control to stop the machine from working. With this type of error, the control panel will need to be reset. The following steps will allow you to reset your control.

Solution:

  1. Clear the ERROR from the screen: Press and hold the MY CYCLES and BACK buttons simultaneously for 3 seconds. The control will display any recorded errors. Please write down what error codes are shown on your screen in case service is needed. If a MORE icon is displayed on the screen, press MORE to list additional errors. When the EXIT button appears, press EXIT.


  2. Remove Power: Follow the onscreen instructions to remove power (unplug unit) and then immediately plug unit back in.


  3. Clear Setup Mode: After power is restored, a setup screen that begins with "Congratulations..." will be shown. DO NOT PRESS the OK button shown at the bottom of the screen. Press the START/STOP and POWER buttons simultaneously until the Home Screen is displayed. Your unit is ready to function normally.

Mar 02, 2015 | GE Profile WPRE6100G Top Load Washer

3 Answers

Not playing NTSC DVDs


I can see if there is an unlock code for your device

Apr 21, 2008 | Yamaha DVR-S150 DVD Player

1 Answer

Uninstall fbDownloader/IE8


Hi,
thanks for taking time to report this issue, please do try the following and see if it helps:
If you are getting an error or at the startup of IE you see that is is loading and then it closes, try either clicking on X or pressing Esc repeatedly.
If that works and IE stops loading but is opened, you have to go to :
1. Open Internet Explorer by clicking theStart button , and then clickingInternet Explorer.
2. Click Tools button, and then click Manage Add-ons.
3. Under Show, click Downloaded controls to display all ActiveX controls.
4. Click the ActiveX control you want to delete, and then click More information.
5. In the More Information dialog box, click Remove. If you are prompted for an administrator password or confirmation, type the password or provide confirmation.
6. Repeat steps 4 and 5 for every control you want to delete. When you are finished, click Close.

If it helps or not please do let me know by replying, please also if it helps rate my solution as helpful, I appreciate that.

Feb 07, 2013 | Computers & Internet

1 Answer

CAN'T GET MY YAHOO EMAIL MESSAGE TO LOAD' MY ACCOUNT ERROR 5


First, try pressing ctrl+F5. Attempt to load it in another browser.


1.When you try to access an email message that has been moved or deleted. For example,
if you delete an email from your inbox and hit the back button on your browser, the email
will still show up in your inbox. Even though it looks like the email is there, it really isnt!
2. If you clicked on a legitimate email message that wasn't deleted or moved and you get
an Error Code every time, click Check Mail and then try to access the same email again.
3. You have several windows or tabs open in the same Yahoo! Mail account. The Error
Code
is a temporary problem which should go away once you close the additional tabs
or windows.
4. You're running the browser-based Yahoo! Mail service, and another mail service (such
as Outlook or your mobile phone email service) tried to access your Yahoo! Mail server.
Try shutting down your other email services to see if this removes the Error Code.
5. If that didn`t help try Yahoo Customer Service to fix the error.
Contact Customer Care (reply needed)
Is your Mail not working right? Need help finding or doing something?
http://help.yahoo.com/l/us/yahoo/mail/ya...

Mar 15, 2011 | Yahoo Mail

1 Answer

Whenever I try to load yahoo e-mail, I get an error message that says Internet Explorer can not display the webpage. It is not working for me through Firefox either.


Here's what you can do hope this procedure will resolve your problem:

1. go to Control Panel>Internet Options
2. Under Browsing History delete, Cookies, History, Temporary Internet Files, Passwords
3. open your IE and try to go to yahoo.

Sep 21, 2010 | Yahoo Mail

1 Answer

''error loading operating system'' on Nec Versa laptop.


First if you haven't already unplug the power and take out the battery for a minute or so. Then reinstall the battery and connect power. Then try and start in Safe Mode, To do this start consistently pressing and releasing the F8 key while pc is powering on, continue until screen should display a similar screen as when turning on normally. From there ( hopefully it has started up ) you should be able to go to START MENU> click/open Control Panel> click/open ADD OR REMOVE PROGRAMS and start removing any programs, if not all, that look like they are using a lot of memory. Doing the SYSTEM RECOVERY is going to uninstall EVERYTHING and reinstall it anyway. Also remember you can only have one security program running other wise they will conflict with each other and cause numerous problems.

Clear temporary files and browsing history. Open IE, even if you don't ever use it, open TOOLS> open INTERNET OPTIONS> In the BROWSING HISTORY section click DELETE > Then click DELETE ALL
One other thing you may want to do is START MENU> RIght click MY COMPUTER> click PROPERTIES> click ADVANCED> click SETTINGS in the PERFORMANCE box and select 'LET WINDOWS CHOOSE WHAT'S BEST FOR MY COMPUTER'
Hope this helps.

Nov 18, 2008 | Computers & Internet

1 Answer

Sleep mode PC continued...


VIA KM400A is the name of the motherboard chipset inside your computer.

I'm fully familure with that board.

1. on boot up hit delete or F2 key to enter the bios setup screen
2. once inside the bios setup screen , look for power management settings.

you'll know what to do at that point

You'll want to

1. turn power nanagement totaly off , which is not a good idea because windows considers
it a device in the system and loads a driver for it , so turning it totaly off MIGHT give windows
a heart attack.

2. set

Display Power Management Controled by Power Management = NA or NO

Turn off display after suspend or hybernate = NO

3. save and reboot



Thank you for choosing FixYa!



Az.

Sep 18, 2008 | HP Pavilion a620n (PC028A) PC Desktop

1 Answer

Error E3 on Mitsubishi HS-U795


Try this :
If your VCR malfunctions, try the following steps prior to contacting your Mitsubishi Dealer:
1 Check the Trouble Checks below to see if there is a solution to the current problem that you are
experiencing.
2 If the problem is not addressed on the Trouble Checks, the safety circuits in the VCR may be in
operation, thus please try the following: (the clock setting and the timer recording will be deleted.)
1 If possible, press EJECT on the front panel and remove the tape.
2 Press TIMER RESET on the rear panel with a pencil or a ball point pen.
3 If a tape is not loaded, press POWER to turn the power on. If a tape is loaded, wait about 1 minute
until the tape protecting function is completed, then press POWER.
3 You may also try the following procedure if the above steps did not resolve the problem (All settings will
be reset to the default settings.).
1 Press POWER on the front panel continuously for about 8 seconds until the current time display on
the front panel shows "- : - -."
2 If a tape is not loaded, press POWER to turn the power on. If a tape is loaded, the tape protecting
function will work and "99" will appear on the front panel display to begin count down. Wait about 1
minute until it reaches "00" to show the tape protecting function is completed, then press POWER.
If the problem with your VCR persists, contact your Mitsubishi dealer for assistance.

Im looking for error codes.

Mar 10, 2008 | Televison & Video

2 Answers

Stuckon screen


Solution:

1. Clear the ERROR from the screen: Press and hold the MY CYCLES and BACK buttons simultaneously for 3 seconds. The control will display any recorded errors. Please write down what error codes are shown on your screen in case service is needed. If a MORE icon is displayed on the screen, press MORE to list additional errors. When the EXIT button appears, press EXIT.


2. Remove Power: Follow the onscreen instructions to remove power (unplug unit) and then immediately plug unit back in.


3. Clear Setup Mode: After power is restored, a setup screen that begins with "Congratulations..." will be shown. DO NOT PRESS the OK button shown at the bottom of the screen. Press the START/STOP and POWER buttons simultaneously until the Home Screen is displayed. Your unit is ready to function normally.

Oct 20, 2007 | GE WPGT9360EPL Top Load Washer

Not finding what you are looking for?
Microsoft Windows Vista Home Basic for PC Logo

64 people viewed this question

Ask a Question

Usually answered in minutes!

Top Microsoft Computers & Internet Experts

micky dee

Level 3 Expert

2644 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18381 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a Microsoft Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...