Question about Kodak Easyshare M753 Slim Digital Camera

1 Answer

Set up I cannot finish installation of the software because I get an error message that states an error code 1618x17x2951053040x. First, how can I complete the installation process and second, can I charge the battery in the camera using the USB port without completing the installation? I ask this because when I plug the charger into the port, no "ready/battery charging light" is on.Please help. Thank you.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 78 Answers

The error that you have mentioned is related to a memory location so you might have a problem with the memory of the PC however I would try and boot the PC in directory service restore mode which is a protected mode in windows and try to install the program from here and see how it goes.

Directory service restore mode is very similar to safe mode however it has admin rights.

Posted on Mar 09, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HOW CAN I INSTALL MICROSOFT OFFICE ACCESS IN MY COMPUTER


  1. Click Start, point to Settings, and then click Control Panel.
  2. Double-click Add/Remove Programs, click Add New Programs, and then click CD or Floppy.
  3. Click Next.
  4. Click Browse.
  5. Locate the root folder of the Office source location, click Setup.exe, and then clickOpen.

    Setup.exe is added to the command line that appears in the Open box of the Run Installation Program dialog box.
  6. Click Finish to run Office Setup.
  7. If requested, type your customer name and product key (CD key) information in the appropriate boxes, and then click Next.

    Note The Next button is not available until you type a valid product key.
  8. Accept the End User License Agreement, and then click Next.
  9. Specify the location where you want to install Office, and then click Next.
  10. On the Choose which applications for setup to install page, click Next.

    If you click Choose detailed installation options for each application on theChoose which applications for setup to install page, and then click Next, the feature tree appears on the Choose installation options for all Office applications and tools page. Because Office Setup detects that you are using Terminal Services, the only installation states that are available are Not Available and Run from My Computer. By default, some features are set to Not Available. Do not change the installation states of these features to Run from My Computer, because you may experience problems with the Office programs that use these features.

    Warning By default, some features are set to Not Available to make sure that there is optimum performance in a Terminal Server environment, including the elimination of unexpected errors. Do not change the installation states of these features to Run from My Computer.

    Note If your Office source location is an administrative installation, Run from Networkis also displayed as an installation state.
  11. On the Begin installation page, click Install.
  12. When you receive a message that the installation completed successfully, click OK, clickNext, and then click Finish.

Nov 04, 2010 | Microsoft Office Professional 2007 Full...

1 Answer

How i can install ms office


Dear sir,

plzz folow this setp to installed succesfullly office 2003.

  1. Click Start, point to Settings, and then click Control Panel.
  2. Double-click Add/Remove Programs, click Add New Programs, and then click CD or Floppy.
  3. Click Next.
  4. Click Browse.
  5. Locate the root folder of the Office source location, click Setup.exe, and then click Open.

    Setup.exe is added to the command line that appears in the Open box of the Run Installation Program dialog box.
  6. Click Finish to run Office Setup.
  7. If requested, type your customer name and product key (CD key) information in the appropriate boxes, and then click Next.

    Note The Next button is not available until you type a valid product key.
  8. Accept the End User License Agreement, and then click Next.
  9. Specify the location where you want to install Office, and then click Next.
  10. On the Choose which applications for setup to install page, click Next.

    If you click Choose detailed installation options for each application on the Choose which applications for setup to install page, and then click Next, the feature tree appears on the Choose installation options for all Office applications and tools page. Because Office Setup detects that you are using Terminal Services, the only installation states that are available are Not Available and Run from My Computer. By default, some features are set to Not Available. Do not change the installation states of these features to Run from My Computer, because you may experience problems with the Office programs that use these features.

    Warning By default, some features are set to Not Available to make sure that there is optimum performance in a Terminal Server environment, including the elimination of unexpected errors. Do not change the installation states of these features to Run from My Computer.

    Note If your Office source location is an administrative installation, Run from Network is also displayed as an installation state.
  11. On the Begin installation page, click Install.
  12. When you receive a message that the installation completed successfully, click OK, click Next, and then click Finish.


Thanks For Your Time,

Apr 13, 2010 | Microsoft OFFICE 2003 BASIC OEM ENGLISH MS...

1 Answer

Have just installed S1500 software and finished the installation but get an error message "Failed to initialize drinver module (0 X 80210019)". What does this mean and how do I proceed? ****


Hi there,

Try the following step :

Pre-Installation Steps
  • Log onto PC with an account that has Administrative Privileges.
  • Disconnect ScanSnap scanner, if connected.
  • Close any open applications.
  • Install ScanSnap Manager, ScanSnap & CardMinder software from the ScanSnap Setup CD-ROM.
    space.gif
    • Upon reboot of the installation you may receive an error message stating, “Failed to initialize driver module.” Please disregard and continue.
ScanSnap fi-5110EOX Vista Update Pack Installation Steps
  1. Download the fi-5110EOX Update Packs (Vista 32-bit Support)
    space.gif
    1. ScanSnap Manager V3.0 – ssv3020up.exe
    2. CardMinder V2.0L10-V2.0L11 – cm2012.exe
  2. Install all two update packs that were downloaded in Step #1.
    space.gif
    1. Reboot is NOT required after each update pack.
  3. Reboot the PC after all three update packs installed completely.
  4. Connect ScanSnap Scanner via USB, open lid, let Windows Vista install the new hardware.

Mar 07, 2010 | Fujitsu ScanSnap Manager

1 Answer

I have a nc6000 and the the message PXE-E61: Media test failure, check cable PXE-M0F: Exiting Intel PXE ROM. comes up I can not boot my computer it states a disk read error occured can you help me. I have...


The PXE-E61 is the error code for No Network Bootable Device Found. Which means the computer cannot find your hard drive and is looking for a network drive to boot from. Either your internal hard drive has failed, or it is not seated or operating properly. Troubleshoot the hard drive, either it is dead or there is an interface problem between the drive and the motherboard or BIOS setting.

Oct 16, 2009 | Computers & Internet

1 Answer

Printer Installation Failed Lexmark Z2320


I 've lexmark printer z2320, and I've download softwer from internet, but after installed, not appear the driver of z2320 but z2300, i want to download the driver propely

Apr 19, 2009 | Lexmark Z2320 InkJet Printer

1 Answer

Reload software 513 error


After typing an incorrect password ten times and restarting the BlackBerry smartphone, the following error appears:JVM 513
All of the data and applications on the BlackBerry smartphone have been deleted and The BlackBerry® Device Software must be reloaded on to the BlackBerry smartphone (Due to the Java Virtual Machine (JVM) error, the BlackBerry smartphone will not show a Connected state in the BlackBerry® Desktop Manager. Proceed to reload the BlackBerry Device Software using the Application Loader)
To perform a clean installation of the BlackBerry Device Software using BlackBerry Desktop Manager 4.5 and 4.6, perform the following steps:
1) Connect the BlackBerry smartphone to the computer and open BlackBerry Desktop Manager.
2) Double-click Application Loader.
3) Click Add/Remove Applications.
4) Type your BlackBerry smartphone password and click OK.
5) Select the check boxes next to the names of the applications you want to load.
6) Click Settings, and then select the check boxes beside Delete all application data and Erase all currently installed applications.
7) Click OK.
8) Click Next > Finish
9) When the process has completed, the message The loading operation was successful will appear. Click Main Menu to return to BlackBerry Desktop Manager.

Apr 10, 2009 | RIM BlackBerry Pearl Flip 8220 Cellular...

2 Answers

Error Message - AM90EN - Corel Application Manager could not find this feature


Go to properties and change the compatibility to Windows XP (or an earlier versions were your Word Perfect worked on) and unclick all the checkmarks. Accept your changes - and the problem disappeared on my system.

Oct 02, 2008 | Corel WordPerfect Office Professional...

5 Answers

HP product assistant


Contact HP for Care at 1-800-585-2494

Feb 12, 2008 | HP Photosmart C6180 All-In-One InkJet...

2 Answers

Database???


Hi, I had the same problem and fixed it by initialising the disk of the walkman (under Settings - Initiaize disk) in combination with the installation of the newest Sonic stage software (that takes a lot of time!). This will remove all songs on the walkman, but the problem was fixed.

Jan 02, 2007 | Sony Network Walkman NW-A1200 MP3 Player

1 Answer

Kodak EasyShare Software/Printer problems


Kodak has been making a lot of changes to that program, due to problems. If you loaded the software that came with the camera, it is very likely out of date. You need to visit the Kodak website and download the latest version of the software.

Aug 30, 2005 | Kodak EasyShare CX7430 Digital Camera

Not finding what you are looking for?
Kodak Easyshare M753 Slim Digital Camera  Logo

Related Topics:

59 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kodak Cameras Experts

kakima

Level 3 Expert

100288 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Tony

Level 3 Expert

2598 Answers

Are you a Kodak Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...