Question about Sears Craftsman LiftMaster Chamberlain Garage Door Opener Wireless Keypad Model 976LM Security+

2 Answers

Opener accepts one code/either keyless pad or car remote

Changed battery in car remote. for craftsman model 139.53674srt2 opener. reprogramed remote after erasing all codes. now unit will only accept one code, either the car remote or keyless pad not both. tried erasing several times, also nplugged unit for power on reset. no help. thanks Ken

Posted by on

  • 3 more comments 
  • Ark38 Mar 10, 2009

    Craftman Garage Door Opener, Model #139.53673SRT1. Two car remotes. Program one, and the other one stops working. I've erased the memory several times. Same result.

  • Anonymous Mar 13, 2009

    Exactly the same problem.

  • YOGIGHARGE Apr 05, 2009

    I have the same problem, did any one have any solution

  • Anonymous Apr 23, 2009

    i replaced the hand held opener device in the car. that fied my prob. mine was a blue button sears opener. they say it can switch codes if it is dropped or banged around. a friend suggested i go to the local car rental see if any openers were left in return cars. probably buy one there for $ 5.00. just match the button colors on the sears models. good luck Ken

  • Mr Gas Can May 11, 2010

    I have the same problem, both remotes can get programmed in but you cant use both at once. You can program one in and thats it

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Other sites say that the remote has become defective. Here's a link for a $15.75 replacement.

http://www.liftmasterremotesonline.com/AF-04-S390-9710.html

Posted on Apr 19, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 61 Answers

That is very odd... try to memorize first the keyless pad and then the transmitter by pressing the learn button once and then the transmitter button.. it might u have humidity on ur control board..

Posted on Mar 10, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Just bought this house six months the last owner forgot the code on the keyless enter pad. the two remotes work. how do I reprogram the keyless enter pad


Locate the smart/learn button on the rear of the motor unit near where all those white wires go. Press and immediately release this and then walk over to the keypad and key in any 4 digit code you like and press enter.

May 17, 2011 | Sears Craftsman LiftMaster Chamberlain...

2 Answers

Tried to reprogram security code for outdoor key pad on 1/2hp craftsman garage door opener according to instructions online, pressed learn button- put in new 4 digit code-held enter. Lights did not flash...


Seems you've done everything right. Press and immediately release the smart/learn button and then walk over and key in a 4 digit code and press enter. If you are sure the battery in the keypad is good then I think your keypad is on the fritz or the wrong one for that opener.

Apr 19, 2011 | Sears Craftsman LiftMaster Chamberlain...

1 Answer

Ladies / Gentlemen: I have a Craftsman 139.53975SRT1 Garage Door Opener. What is the correct keyless entry pad for this opener? Will a 139.53876 keyless entry pad work with this opener? Thank You! ...


The correct keypad for your opener is 139.53684. The 53876 keypad is an older technology and will not work correctly. If you program it you will find your remotes no longer work and if you reprogram your remotes the keypad will not work.

Sep 08, 2010 | Sears Craftsman LiftMaster Chamberlain...

2 Answers

Can't reprogram/operate keyless entry pad for Craftsman Model 139.53661SRT3 garage door opener.


If the following instructions don't work and you have a good battery the keypad has failed.

Locate the smart/learn button on the rear of the motor unit near where all those white wires go. Press and immediately release this and then walk over to your keypad and key in your 4 digit code and press enter.

Apr 07, 2010 | Sears Craftsman LiftMaster Chamberlain...

1 Answer

Cannot get remote for garage door to work


push the green button on the opener then push your remote button

Jan 25, 2010 | Locks & Locksmithing

1 Answer

How can I reprogram my keyless pad?


If you mean wireless keypad it is like this. Locate the smart/learn button on the rear of the motor unit near where all those white wires go. Press and immediately release this and then walk over to your keypad and key in your 4 digit code and press enter.

Oct 19, 2009 | Sears Craftsman LiftMaster Chamberlain...

1 Answer

No instructions for reprogramming keyless remote


the chamberlain company is very nice go to sears and get number of side of box... sorry I cant remember off top of my head...

Apr 03, 2009 | Sears Craftsman LiftMaster Chamberlain...

1 Answer

Keylees entry and remote controls do not work at the same time


There are two types of technology with this operator (rolling code and non-rolling code). This operator will except one or the other but not both. It is not uncommon for a rolling code (Security+) remote or keyless to lose the "rolling"part of its technology and become a non-rolling code device so it is not compatable with the rolling code technology. You will need to replace the one remote or keyless that is not like the others.

Nov 15, 2008 | Sears Craftsman LiftMaster Chamberlain...

Not finding what you are looking for?
Sears Craftsman LiftMaster Chamberlain Garage Door Opener Wireless Keypad Model 976LM Security+ Logo

410 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sears Building Materials Experts

Mike

Level 3 Expert

4332 Answers

Cindy Wells

Level 3 Expert

4858 Answers

Brad Brown

Level 3 Expert

14405 Answers

Are you a Sears Building Material Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...