Question about Insignia 42" Flat-Panel Plasma HDTV

1 Answer

Putting the tv stand back on the tv

We removed the tv stand to mount our tv on the wall. Now we want to put the stand back on...we can not seem to figure out how to put it back on. We bought it at Best Buy but the nearest Best Buy is 2.5hrs away...Can you please help us put the stand back on the tv.

Thank you,
Kessler

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 33 Answers

These are removal instructions should be helpful though



Open up the panel on the back of the TV which covers the various input connections. At the bottom of the area previously covered, there are 8 screws (two rows of four screws). Remove them, and the entire stand should now slide right out of the TV. You can then replace the screws back in their holes, so you don't lose them. You do not need to disassemble the stand to do this.

Posted on Jul 07, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Remove stand from w4207 TV


Put tv on bed face down and look at the stand and locate and remove any and all screws holding stand to the flat screen set. Then after mounting the wall plate per instructions mount the tv to wall mounting.

Sep 08, 2015 | Westinghouse W4207 42 in. HD-Ready LCD TV

1 Answer

I need to know how to remove the bottom from my Toshiba Regza TV so that I can put it on a wall mount.


What you need to do is with the model number GOOGLE to see if you can find a service manual or even a owners manual.

Most of these sets you carefully lay the set on a padded surface face down and look at back-----should be four or more recessed holes with bolts that secure the base to the back/bottom of the set.

Most of these also you have to remove that base to get the back off which is a hint---usually no small screws but bolts.

Hope this helps you

Mar 17, 2012 | Televison & Video

1 Answer

Picture remains for few seconds then screen goes blank, sound remains on


I had this problem on my 42" Philips LCD. Just got it yesterday and worked fine on the tv stand. As soon as I mounted the TV to the wall via wall mount system, I had the exact same issue you did. Figured it out today.

The wall mount was putting pressure against the center of the back of the tv (tv set had a slightly rounded back plate, and the mount was a flat plate). As soon as I put spacers (part of the wall mount hardware set) between the wall mount braket and the tv so there was no contact except at the mounting holes, the tv worked fine.

My theory is the pressure pushed the tv back plate against some board components which caused them to overheat (no air flow); or put pressure on internal connectors. I dont know.

Hope this helps, may not apply to your situation.

Sep 01, 2009 | Samsung SM932MW 19 in. LCD TV

1 Answer

Screen goes blank after about 10 or 15 minutes. There's still sound coming through. Picture comes back on if you turn the tv off & back on again. Any suggestions? (Sansui HDLCD2200 LCD TV) Thanks.


I had this problem on my 42" Philips. Just got it yesterday and worked fine on the tv stand. As soon as I mounted the TV to the wall via wall mount system, I had the exact same issue you did. Figured it out today.

The wall mount was putting pressure against the center of the back of the tv (tv set had a slightly rounded back plate, and the mount was a flat plate). As soon as I put spacers (part of the wall mount hardware set) between the wall mount braket and the tv so there was no contact except at the mounting holes, the tv worked fine.

My theory is the pressure pushed the tv back plate against some board components which caused them to overheat (no air flow); or put pressure on internal connectors. I dont know.

Hope this helps, may not apply to your situation.

Aug 03, 2009 | Sansui HDLCD-2200 22 in. LCD TV

2 Answers

Screen goes blank after 2 minutes


Your best bet is to take the back off and look if there are and bulged capacitors on the power supply first, also look for cold solder joints on the 24 volt rail that goes to the HV inverter board. If both seem to be ok then you could have a inverter transformer going bad on the inverter board. Let me know how you do>

May 31, 2009 | Olevia LT27HVX 27 in. LCD Television

2 Answers

Just bought a insignia ns ltdvd26-09 will it mount to wall


I took 8 screws out from back of set just above stand, the bracket fell off.
Be sure to put the screws back in

Feb 08, 2009 | Insignia LCDTV26 26 in. Television

2 Answers

Removing the stand on Insignia LCD 26F TV


My insignia 26 inch dvd combo TV stand can be removed by removing the access cover to your input connection. There are eleven black phillip-head screws. The three bottom screws also hold the plastic base cover in place. Remove all eleven screws and pull the stand out from below. The four philip-head screws on the back center of the TV is for the location of the wall bracket mount. Good luck.

Jan 26, 2009 | Insignia LCDTV26 26 in. Television

2 Answers

I am trying to remove the stand on a LG Model : 52LB5D. I have removed the 4 screws on the back but can't remove stand. It feels like there is another screw or something holding it in.


If you are looking at the back of your tv there is the stand bracket with a screw on each side. remove those screws and nothing will happen. that is the problem i was having but if you look right above the ones you just took out and there is going to be a black screw. take those off from each side and it will fall off.

Dec 09, 2008 | Televison & Video

3 Answers

Mounting to TV Stand


there are two types of stands, some are wall type which needs to be mounted using rawl bolts, nuts are suppose to hold a stand, some are ground stands which are suppose to be put on a flat surface in order to balance.

Jul 29, 2008 | Panasonic TH-50PZ77U 50" Class Plasma HDTV

5 Answers

Olevia 227V lcd


All you need to do is remove the two long screws on the back of the tv panel just above the stand, then the two short back panel screws AND the three short screws just above the two panel screws and the stand will come right off. DO NOT remove any of the other screws in the perimeter of the back panel. There is no need.
After much trial and error this is the correct and EASY procedure for this apparently troublesome task. Good Luck !!

Feb 12, 2008 | Olevia LT27HVX 27 in. LCD Television

Not finding what you are looking for?
Insignia 42" Flat-Panel Plasma HDTV Logo

562 people viewed this question

Ask a Question

Usually answered in minutes!

Top Insignia Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69795 Answers

Dave Naylor
Dave Naylor

Level 3 Expert

834 Answers

Cindy Wells

Level 3 Expert

4805 Answers

Are you an Insignia Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...