Question about Panasonic KX-TG1033S Cordless Phone

1 Answer

Handset constantly display missed calls

All 4 handsets constantly display missed call even if call is not missed.How do I get the handsets to return to the normal display of date and time and only display missed calls if there are any.

Posted by on

  • cindyandken Mar 09, 2009

    Thankyou, It worked.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 2 Answers

You have to clear them. it will show missed call on all the ones you did not answer the call on.

Posted on Mar 09, 2009

  • kc chick Jun 05, 2012

    I'm having the same problem but my phone's menu button will not allow me to select the "Caller list" in order to delete them. Any help out there?

  • Ryan Clayton
    Ryan Clayton May 15, 2014

    ask4ajd - Care to tell us HOW to do it vs saying you have to do it. I know I need to clear them but what are the menu steps to clear them?

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Display shows handset icon blinking


It may be that your battery is flat or that you have missed calls or even that it is in use. It depends on the handset make and model

Oct 23, 2016 | Lands Phones

1 Answer

DS6321 out of range, no power at base


This sounds like a registration problem, the handset(s)
and the base have lost identification with each other.

I. To address this, first de-register the handset(s) ---
do this procedure for each handset:

0. Start by taking off the battery compartment cover....

1. press [menu]
2. scroll up/down to "Settings"
3. enter * 7 8 9 0 #
4. scroll down to "next page", press [select]
5. scroll down to "Register Clear?", press [select]
6. display asks "Confirm?" or "Register Clear??", press [select]
7. display reads "Ok" and chirps, press [ off ]

8. UNPLUG THE HANDSET BATTERY (why the cover was off)

9. Wait ~30 seconds, re-connect the battery & replace the cover

10. display reads "Not Registered" ===============================

II. To register the handset to the base:

1. press [Find Handset] on the base and hold for
~4 sec until the "In Use" lamp lights.
2. press # on the handset and set the handset into
the handset cradle on the base
3. within 30 seconds or so, the handset will either
chirp and display "Handset Registered", then
"Handset #1" or it will say "Registration Failed".

NOTE: the battery must be well charged prior to the
registration process, a weak battery may cause a
"Registration Failed". Charge the battery for a few
hours and try the registration ( II ) again.

NOTE: the base can only handle 5 handsets and will
increment the number of each handset registered
until "Handset #5" has appeared, even if some of
the handsets are lost/not in use. Trying to register
more than 5 handsets will result in "Registration Failed."
===============================

III. To clear the base of all handset registrations and
be able to start registering again at Handset #1:

1. press [Find Handset] on the base and hold past ~4 sec when the "In Use" lamp lights, at
about 10 secs the "In Use" lamp will begin to
blink.
2. release the [Find Handset] button momentarily,
then briefly press it again. After a moment,
all handsets that were registered to the base
(if any) will display "Not Registered" and be
ready for fresh registration
3. for multiple handsets, return to II. above and
register each handset in turn.
===============================
Good luck !!

May 02, 2016 | Vtech Lands Phones

1 Answer

How do I call a twin binatone cordless in another room


  • 1. In standby mode, press (intercom).
    • • Intercom is established immediately if there are only 2 registered handsets.
    • • If there are more than 2 registered handsets, the handset numbers which are available for intercom will be displayed.
  • 2. Press the handset number you wish to call or press * to call all handsets.
  • 3. Press (Talk) on a called handset to answer the internal call, where both internal callers can talk.
  • 4. To end the intercom call, press (End/off) on either handset.

Nov 27, 2015 | Binatone Lands Phones

1 Answer

Hand set says connecting even before it is reset with new base.


This sounds like a registration problem, each 'old'
handset must be de-registered from its original
base and then registered to the 'new' base.

NOTE: the CS6229 handles a maximum of 5
handsets. If you have a handset displaying
"Handset #5" then you have a 'fully populated system'
even if you actually have only one or two handsets.

You will need to clear each handset ( I ) then clear
the base of all registrations ( II ) before re-registering
each handset ( III ) up to the maximum of five.
=====================================
( I ). First, to de-register a handset ---

0. Start by taking off the battery compartment cover.

1. press [menu]
2. scroll up/down to "Settings"
3. enter * 7 8 9 0 #
4. scroll down to "next page", press [select]
5. scroll down to "Register Clear?", press [select]
6. display asks "Confirm?" or "Register Clear??",
press [select]
7. display reads "Ok" and chirps, press [ off ]

8. UNPLUG THE HANDSET BATTERY
(this is why the cover was off)

9. Wait ~30 seconds, re-connect the battery &
replace the cover

10. display reads "Not Registered"
===============================

( II.) To clear the base of all handset registrations
( if needed, else skip ahead to ( III ). )

1. press [Find Handset] on the base and hold
past ~4 sec when the "In Use" lamp lights, at
about 10 secs the "In Use" lamp will begin to
blink. 2. release the [Find Handset] button momentarily,
then briefly press it again. After a moment,
all handsets that were registered to the base
(if any) will display "Not Registered" and be
ready for fresh registration ===============================

( III.) To register each handset to the base:

1. press [Find Handset] on the base and hold for
~4 sec until the "In Use" lamp lights.
2. press # on the handset and set the handset into
the handset cradle on the base
3. within 30 seconds or so, the handset will either
chirp and display "Handset Registered", then
"Handset #x" or it will say "Registration Failed".

NOTE: the battery must be well charged prior to the
registration process, a weak battery may cause a
"Registration Failed". Charge the battery for a
few hours and try the registration ( III ) again.

===============================
Good luck !!

Jul 23, 2015 | Vtech Lands Phones

1 Answer

My phone displays out of range how to correct


This sounds like a registration problem. Try
de-registering the handset(s) and re-registering
to your base.

NOTE: the CS6429 handles a maximum of 5
handsets. If you have a handset displaying
"Handset #5" then you have a 'fully populated system'
even if you actually have only one or two handsets.

You will need to clear each handset ( I ) then clear
the base of all registrations ( II ) before re-registering
each handset ( III ) up to the maximum of five.
=====================================
( I ). First, to de-register a handset ---

0. Start by taking off the battery compartment cover.

1. press [menu]
2. scroll up/down to "Settings"
3. enter * 7 8 9 0 #
4. scroll down to "next page", press [select]
5. scroll down to "Register Clear?", press [select]
6. display asks "Confirm?" or "Register Clear??",
press [select]
7. display reads "Ok" and chirps, press [ off ]

8. UNPLUG THE HANDSET BATTERY
(this is why the cover was off)

9. Wait ~30 seconds, re-connect the battery &
replace the cover

10. display reads "Not Registered"
===============================

( II.) To clear the base of all handset registrations
( if needed, else skip ahead to ( III ). )

1. press [Find Handset] on the base and hold
past ~4 sec when the "In Use" lamp lights, at
about 10 secs the "In Use" lamp will begin to
blink. 2. release the [Find Handset] button momentarily,
then briefly press it again. After a moment,
all handsets that were registered to the base
(if any) will display "Not Registered" and be
ready for fresh registration ===============================

( III.) To register each handset to the base:

1. press [Find Handset] on the base and hold for
~4 sec until the "In Use" lamp lights.
2. press # on the handset and set the handset into
the handset cradle on the base
3. within 30 seconds or so, the handset will either
chirp and display "Handset Registered", then
"Handset #x" or it will say "Registration Failed".

NOTE: the battery must be well charged prior to the
registration process, a weak battery may cause a
"Registration Failed". Charge the battery for a
few hours and try the registration ( III ) again.

===============================
Good luck !!

Oct 02, 2014 | Vtech Accessory Handset with Caller ID for...

1 Answer

I attempted to register several new TCX 905s to my TRU 8866 base without success. I followed instructions from the owner's manual, from Uniden customer support, and from suggestions from this web site. ...


October 10th, 2013 at 9:19 amPROBLEM:
After de-registering handset, handset displays [REGISTRATION FAILED; UNAVAILABLE] when trying to register handset.
This worked for my UNIDEN TRU-9480-2
SOLUTION:
1) Remove handset from base
2) Remove power cord from back of base
3) Press and hold the [find hs] button on base as you plug the power supply back in; the charge light should then be blinking.
4) Return handset to base and it should register
GOOD LUCK!! HOPE THIS HELPS!!

Oct 04, 2013 | Uniden Lands Phones

1 Answer

How do i forward my phone calls


HOPE THIS HELPS:
Call Forward • The first handset (HS1) can forward an external call to another handset (HS2, HS3, or HS4) by pressing and holding the INTERCOM key. After entering the handset number to which you want to forward the call, HS1 will display CALL FORWARDED. • To answer the call, another system handset can press PHONE, SPEAKER or any dial pad keys.
NOTE: If the other HS2 does not respond within 30 seconds, the external call will be returned to HS1 and its display will show CALL BACK. If the returned call is not answered within 30 seconds, the external call will end automatically
THE MANUAL CAN BE FOUND HERE: http://dl.owneriq.net/c/c72cee7d-bd52-42c1-b9fa-2ee5ccc500af.pdf

Jun 27, 2011 | AT&T E5630 Cordless Phone

1 Answer

Tring to add a handset to a att 5840 base!


The process is called "Registering."

From another fixya post:

1. Make sure to charge the handset battery pack at least 12 hours.
2. Using the soft keys on the base located below the base screen, press MENU.
3. Use the up or down arrow keys to select DISPLAY BASE ID.
4. Press OK. The base screen will display the 15-digit Base ID
code for about 30 seconds, then the unit returns to the idle
screen. Write down the Base ID code on a piece of paper.
5. At the cordless handset, use the soft key to select NEW.
6. Enter the 15-digit Base ID code using the number keypad.
7. Use the soft key to select OK. The screen displays PLEASE
WAIT!.
8. After about 45 seconds, the screen displays FOUND BASE. If the handset displays BASE BUSY TRY LATER, the base is in
use.

Mar 21, 2011 | AT&T 5840 Cordless Phone

1 Answer

VT2461 ADDITIONAL HANDSET PROBLEM


I can vouch for the second solution. It worked perfectly on my 2461 with two extensions. Even the vTech website was not able to provide a solution.


Dec 12, 2007 | Vtech VT 2461 Cordless Phone

4 Answers

BT Freestyle 2200 I am having problems obtaining a dialing tone on both of my handsets. When I press the green button for a line out it just beeps 3 times and cuts off. There is charge in both the...


hi just want to help others as desciption aint complete above

Registering a BT Freestyle 2200 handset
1. If there is a handset in the base remove it whilst you are registering the new handset.
2. Press and hold the PAGE button on the base for about 10 seconds until you hear a beep and the In Use light starts flashing.
3. On the handset to be registered, press and hold redial & CALLSd buttons together until display shows 65-.
4. Enter the base number. If this is a new handset then the base number is 1, the display shows 65-1 then PIN. which is normally 0000
5. Enter and registration starts. When the handset beeps and returns to standby registration is complete.

Nov 08, 2006 | British Telecom Freestyle 2200 Trio...

Not finding what you are looking for?
Panasonic KX-TG1033S Cordless Phone Logo

2,441 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Lands Phones Experts

kakima

Level 3 Expert

98770 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

guyvstewart

Level 2 Expert

82 Answers

Are you a Panasonic Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...