Question about Zenith Z36H32D 36" TV

1 Answer

One line accross screen

Please help me with this problem on a z36h32d

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 28 Answers

It's problem created by Horizantal or vertical line check your york wire soldering may it is dry sold and check for no dry sold on PCB

Posted on Mar 09, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Horizontal white lines 27A43.


You have some bad capacitors. They are located very near and next to your vertical IC. I would guess you would have to replace maybe four of these! Thanks for asking!

Jun 12, 2010 | Toshiba 27A43 27" TV

1 Answer

Tv model z36h32d


LOOK TO THE BACK COVER YOU MAY FIND IT

Apr 29, 2010 | Zenith B36A30Z 36" TV

1 Answer

I turned it on and just one line accross the screen appears. the audio is fine.Everything is normal except theres just a line on the screen.


You have a vertical problem. You may need to resolder the vertical IC, and check each cpacitor that is near the vertical IC. Your TV will be restored to full screen!

Mar 27, 2010 | Televison & Video

1 Answer

Sound only w/1 straight red line accross the middle of the screen


try to replace the vertical ic and resolder the vertical section.

Sep 16, 2009 | Hitachi 36UX01S 36" TV

1 Answer

No picture. Just a vertical line accross the screen.


When this kind of set comes in for this problem, it is typically caused by a leaky/intermittent diode D402, located next to the heat sink for the vertical deflection IC. I will typically also replace the vertical deflection IC at the same time, just to avoid repeat failures.

Jul 06, 2009 | Toshiba 32DF46 32" TV

3 Answers

My 15 year old Toshiba Televisiononly shows a narrow horizontal band in the middle of the screen. Sound OK.


Hiii fairley,

You aren't specsificly dercribe yor tv set.
For common TV horizontal problem ;i.e : White line accross the horizontal screen, horizontal band,etc..it's can solved by replacing the IC Vertical/Transistor, and olso to replace the cap nearest the IC.

For common TV Vertical Problem :i.e : White line at the center of the screen (top to bottom),Vertical band,etc...It's can cure by Replacing the Horizontal IC/Transistor,and offcurse the cap's.

Tha's what all I know....

Hope can help you to solved the problem.

Thank's

h3liax

Jun 22, 2009 | Toshiba 32A33 32" TV

1 Answer

White lines accross the top of the screen.


replace vertical output ic ,and maybe 2 capacitors 100uf 35v. 2.2uf 50v

Dec 10, 2008 | Sansui DTV2760 27" TV

1 Answer

Tv has straight line accross screen


Vertical deflection problem.. job for experienced tec

Apr 01, 2008 | Insignia IS 20" TV040919 TV

1 Answer

White line horizontially through middle of picture


A repair like this is in the vertical drive/output section of the TV set. It could be a simple capacitor causeing this problem or a combination of the capacitor and the output IC. A repair like this should not exceed 120 to 150 US. Is it worth that to you? How much can you replace it for? Good Luck PS please dont forget to rate this thread.

Oct 25, 2006 | Bush 5693D 24" TV

1 Answer

No vertical sweep


You might be able to take care of it yourself,you are corret when you said no vertical sweep,if you can identify the vertical IC it will be easy,you are looking for loose conections but by now it might have a bad vertical Ic and it needs to be replaced along with the safety resistor that power the IC,the ic should be mounted on a heat sink and the resistor should have low resistance,very straight forward repair and while you are there make sure and check for overheated areas and loose conections specially in the power supply , horizontal drive circuit and convergence IC's.Be careful you still have high voltage witch can be dangerous.

Sep 30, 2006 | Mitsubishi CS-35505 35" TV

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

65 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zenith Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69955 Answers

matt martin
matt martin

Level 3 Expert

1198 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Zenith Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...