Question about Mitac Mio C320 Car GPS Receiver

2 Answers

Mio c320 not detected by microsoft xp

Cannot start the mio at all. after power on (6 -10 sec) a red screen with mio logo, without any key to press. connecting to pc not detected by usb.

Posted by on

  • vancrazy May 12, 2009

    I have already updated the firmware and I have opened Mio More Desktop to reinstall the software. The option is faded in grey in the tools drop down menu and herfore I cannot choose this option . My usb is not connecting the device to the computer!

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 45 Answers

The only thing it can be done is to rewrite the flash through j-tag method, but this must be done in service

Posted on Apr 15, 2009

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 4 Answers

Make sure you plug the USB cable into the socket on the bottom of the Mio 320 and not into the cradle.

Your WinXP PC should detect your Mio C320 immediately, and a connected logo will appear on the screen of the Mio C320.

Posted on Jul 20, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Magnavox error codes


check this
The Service Default Mode (SDM) is a technical aid that can be used to display the your TV error code.
Follow these instrutions exactly to place your set in SDM Mode.
For sets that still have video do the following.
  1. Turn your TV on
  2. Using the original Philips TV remote press the following keys. Press each key for 1 sec then press the next.
  3. From the remote press 0 6 2 5 9 6 MENU
  4. You should now see the letters "SDM" in the far right hand corner.
  5. If not do step "3' again.
  6. To display the error code hit the "Status" button on your remote.
  7. The TV can store up to "7" past errors.
sdm.jpg
For sets that have no video do the following.
  1. Turn your TV on
  2. Using the original Philips TV remote press the following keys. Press each key for 1 sec then press the next.
  3. From the remote press 0 6 2 5 9 6 MENU
  4. Wait a few seconds. The red power light should begin to blink.
  5. The blinking sequence will determine the error code.
  6. You will have one long 5 second red blink followed by the error code.
Note: On some sets the TV will automaticaly blink the error code when its powered up without having to go into the SDM menu. If you power light blinks after the set is powered up jot down the sequence.
Example Error Codes from the power light.
( RED 5 Seconds ) off ( RED 1/2 Sec ) off ( RED 1/2 Sec ) off ( RED 1/2 Sec ) = Error Code 3
Example #2
( RED 5 Seconds ) off ( RED 1 Sec ) off ( RED 1/2 Sec ) off ( RED 1/2 Sec ) = Error Code 12
error-codes.jpg


(Note:) Logo/images/Pictures has a respective copyright. I used it for demonstration purpose only.
If something in your mind to comment or suggest, please let us know. In our efforts to provide detailed information, there is possibility of inaccurate contents. If you see any mistake or incomplete in our information, please don't hesitate to tell us. We will fix it immediately as soon as possible.

Jul 04, 2014 | Televison & Video

2 Answers

How do I get to the onscreen key board on a Presario V2000


if you have windows Xp installed see on microsoft site:http://windows.microsoft.com/en-US/windows-xp/help/on-screen-keyboard
using kayboard: Display the Start menu by pressing Ctrl+Esc (or the Windows logo key). Move to All Programs by pressing P. Move to Accessories by pressing the Down Arrow key and then Enter. Press Enter again to move to Accessibility. Move to On-Screen Keyboard by pressing the Down Arrow key and then Enter.Or using mouse: Display the Start menu by pressing Ctrl+Esc (or the Windows logo key). Move to All Programs by pressing P. Move to Accessories by pressing the Down Arrow key and then Enter. Press Enter again to move to Accessibility. Move to On-Screen Keyboard by pressing the Down Arrow key and then Enter.

Mar 05, 2012 | HP Compaq Presario V2000 Notebook

1 Answer

My HP C6380 is printing blank pages. Cartridges are full. Test page only prints the Microsoft logo and no text. Copy feature works although the images appear light. Please help ASAP. John


1. Disconnect the power cord and USB from the printer and press and hold the power button down for 30 secs without anything connected to the printer. 2. Now connect the power cord only and turn it ON, make sure that the printer has sufficient ink in the cartridges, you may clean them and inside the printer with a lint free cloth. The printer will take some time to initialise. 3. Now we will reset the printer so follow the steps below. A. - Press and Hold the ?Print Photos? & ?Red Eye Removal? buttons. Release both buttons. Display should say ?Enter Special Key Combo? B. - Press and release in sequence ?Red Eye Removal?, ?Print Photos?, ?Red Eye Removal? 1. Press and release the right arrow button until the display says ?System Configuration Menu?. 2. Press and release the ?OK? button. 3. Display should say ?Support?. Use the Right arrow Key to look for "Reset Menu". 4. Press and release the ?OK? button. 5. Press the right arrow key to look for "Semi-Full Reset", press 'OK' 6. The printer will go off and will power on by itself, else wait for 20 seconds and power on the printer. Also check if Operating system is Windows XP, then Service Pack should be 2 or 3. Try reinstalling the main s/w driver and also upgrade the firmware from http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?lc=en&dlc=en&cc=us&product=3560280

Jul 14, 2010 | HP Photosmart C6380 All-In-One InkJet...

1 Answer

Why typing on my key board,it skips letters that are typed, you have to backspace and press hard on the key to get it to type. What the problem?


There are few steps check you can solve your issue with these steps or not:-
1. First of all remove ac adapter and the battery from your notebook and press and hold the power button for 8 to 10 secs. and without the battery plug in the ac adapter and start the computer.check the notebook is working or not.
2.The second step is to restart your computer and keep on tapping the f10 key till you see the logo on the screen and thn you will be on BIOS screen.now press the f9 key and set BIOS default.and after that press f10 key to save and exit.
3.Third step is to uninstall and reinstall the driver from the device manager.

Feb 04, 2010 | Dell Microsoft Windows XP Home Edition

2 Answers

My iphone is frozen at the apple logo screen and wont power down or sync with itunes. How do I fix this?


Have you tried holding the power button and the home key together. Hold until unit reboots and once apple logo appears, release both buttons. If this doesnt work try this below.

Try launching I Tunes on PC without I phone connected. Then make sure I Phone is switched off. Now hold down the home key (square at bottom of screen) Whilst still holding home key plug in your I Phone usb lead. I Tunes should identify you I Phone after few seconds and prompt " detected I Phone in recovery mode" (or similar) it should then prompt 'yes' or 'no' to do recovery. Select yes and let it start. This should resolve this issue as it did on my 3G version.
If still no luck search FAQ's section on www.apple.com
Hope that works/helps?

Oct 14, 2009 | Apple iPhone 3G

1 Answer

Need operating manual for maps system, not available


Operating Manuals and Quick Start Guides for the Mio C320 are available here:

http://www.retrevo.com/support/Mio-C320-GPS-manual/id/5128ci774/t/2/

Apr 25, 2009 | Digi MIO Walker 136 GPS Mobile Navigation

2 Answers

Mio C320 - How to replace battery indicator?


c230.files.wordpress.com/2008/02/battery-replacement-on-the-mio-c-230.pdf

go to that link and download the dpf and it'll explain everything

Feb 10, 2009 | Mitac Mio C320 Car GPS Receiver

1 Answer

Lost manual


The User Guide and Quick Start Guide for the Mio C320 is available here:

http://www.retrevo.com/support/Mio-C320-GPS-manual/id/5128ci774/t/2/

Sep 17, 2008 | Mitac Mio C320 Car GPS Receiver

1 Answer

Black screen


This problem has happened to me before turn the gps unit over and clean off the gold colored conductors on the bottom take a paper clip and touch the 1st and 4th pins together this resets the unit be sure it is the 1st and 4th pins on the opposite side of the little power connector though.

Jun 26, 2008 | Mitac Mio C320 Car GPS Receiver

Not finding what you are looking for?
Mitac Mio C320 Car GPS Receiver Logo

Related Topics:

1,155 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitac GPS Experts

Ed Mac

Level 3 Expert

731 Answers

yadayada
yadayada

Level 3 Expert

70374 Answers

Greg Cann
Greg Cann

Level 3 Expert

1114 Answers

Are you a Mitac GPS Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...