Question about NEC PT-390 /NITSUKO Phone
Cancel flashing message waiting light.
This would be a problem with the system's programming and not a phone. You either have someone at the company that can administer the system or you pay an installation for programming changes.
Posted on Jul 07, 2007
Have u ckecked whether the message box is full?
Try clearing all the messages from the setup menu
Try to tell me.... whether my suggestion was useful???
Have a nice day.
Posted on Feb 09, 2008
Resetting the New Message LED
If the LED remains on after you’ve retrieved your messages, you may need to reset
the indicators. With the phone is in standby mode, press and hold find handset on
the base until the paging sound stops (about 5 seconds).
Posted on Apr 02, 2008
The VMWI led will stay lit if you have voice mail service from your telephone service provider. A lot of providers will also give a broken or stutter dial tone when you first go off hook as an indication of messages waiting. If you hear a stutter dial tone when you first go off hook, you will need to contact your telephone service provider. If not, you can try a simple reset on the base unit, just unplug it from teh AC adapter for about 5 minutes and then plug it back in.
Posted on Mar 24, 2009
Slide the Nortel Grey Bar above the Hold & Rls buttons to reveal the setup button.
Posted on Jul 14, 2009
Tips for a great answer:
Jun 03, 2014 | Uniden Cordless Phone
Jul 31, 2012 | Lexmark E250dn Laser Printer
Mar 15, 2011 | Vtech T2326 Cordless Phone
Sep 22, 2008 | Toshiba DKT-2010 Corded Phone
Jul 30, 2008 | Toshiba DKT2010H Phone
Mar 18, 2008 | Toshiba DKT-2020 Corded Phone
Jan 14, 2008 | Toshiba DKT-2010H Corded Phone
325 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: