Question about Speakers & Subwoofers

1 Answer

Instalation instructions required - Speakers & Subwoofers

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Uhmmm. . .okay. . .I would use nothing less than 16AWG speaker cable. Do not run the speaker cable parallel in close proximity to any AC wiring. Speaker cable rated to run through walls with usually be color coded red and black. Connected the red to the red on the speaker and red on your home theatre receiver. Do the same for the black. If speaker cable insulation is clear, look closely for subtle markings or writing on the insulation. The writing will only be on one of the two wires. Designate that as the POS or PLUS or + or RED. Connected it to the red on the speaker and the red on the back of your home theatre receiver. The other is by default the black and connect it to like colors. Repeat for all 5, or 7 speakers in your theatre. Your subwoofer probably has a seperate amplifier, so it gets it's power from it's own AC power plug. . .so plug it in. The sound coming from the Home Theatre receiver will be low-power and will carry on an RCA cable. Look for the subwoofer output on the home theatre and connect it to the input on the subwoofer. There may be a right and a left input on the woofer. . .it doesn't matter which you plug it into. . .either one will do.

Posted on Mar 09, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I was givin a d-6 surroundsound system with no instal instructions or remote ,any idea where i can get these thank you


I'm sorry to inform you, they NEVER come with instructions - you might want to read attached link

http://answers.yahoo.com/question/index?qid=20081008160909AAF9qrE

Feb 26, 2011 | Speakers & Subwoofers

2 Answers

Do these speakers require a specific driver?


No never, Speakers never requires drivers. But the sound card is.
Think this is helpful !

Aug 11, 2010 | GE HO98010 Computer Speakers

1 Answer

I purchases logitech S120 speaker system for my dell. Hooked up per instructions but computer states no system installed and I get no sound.


check it is ok or not in another computer.
go control panel and click speaker and sound option look setin option and set it,

Nov 04, 2009 | Logitech Z4 Speakers

2 Answers

Hi, I just purchased a used set of 901s with the original active equalizer. they are both series VI and were bought together. Unfortunately, the man misplaced the installation instructions for the...


If no Amp is used, connect jacks ( Left, Right) from your receiver output to Bose equalizer Input ( L, R) where it says Amplifier. Then also under where it says Amplifier, connect jacks from Output to your speakers. This would require the type of speaker wires that are RCA (plug in, red and white) on one end bare wire on the other to the speakers.
I don't know what the output is on your Kenwood, but if it's low watts, an amp is much better to crank those Bose. It's a different connect with an amp. Go L &R from the receiver to Equalizer as before, then from equalizer to amp Input where it says Tuner. then hook bare speaker wires to back of amp to Bose speakers.
You should have full use of Bose controls. The Monitor button is for an extra component that can be hooked up on the back, right side of equalizer.

Jul 15, 2009 | Bose 901 VI Main / Stereo Speaker

1 Answer

My durabrand ht-3917 wont work with my computer. Is there any software I can install?


i have mine plugged in via the line out jack. no software is required except the driver for your sound card if it is not already installed. i used a rca to headphone style jack and had no problems

Jan 16, 2009 | Durabrand HT-3915 System

1 Answer

NEED EXTENSON CABLES FOR 2 SPEAKERS


Hi,

Normally, speaker wires of any length are available from most electronic stores and/or audio/video stores. Even those shops that do car audio installations would have them in their inventory. The only requirement/specification you would need is the power output of your home theater and the required length. The longer the distance, the better the bigger the wires. Speaker wires always come in pairs and have color coding to designate +/-.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information. Good luck and kind regards. Thank you for using FixYa.

Nov 10, 2008 | Speakers & Subwoofers

1 Answer

Intallation Help


Post a "want it now" on ebay for brochures on your particular system. There's a guy there who has/makes reprints of many original instuctions for all kinds of stereo gear. Or you can just search thru electronics by punching in what it is you need.

Sep 20, 2008 | Speakers & Subwoofers

Not finding what you are looking for?
Speakers & Subwoofers Logo

Related Topics:

217 people viewed this question

Ask a Question

Usually answered in minutes!

Top Speakers & Subwoofers Experts

 Grubhead
Grubhead

Level 3 Expert

4590 Answers

Michael Edwards
Michael Edwards

Level 1 Expert

53 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Speaker and Subwoofer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...