Question about Denon AVR-3805 Receiver

1 Answer

I have this DENON AVR4800, and there is no osd. I plug the yellow cable in dvd input, and outmput in DENON monitor 1 Yellow also. I try to reset the unit and that do not solve my problem, please help....

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 93 Answers

You need to use the monitor output on the denon and go to a video input on your tv, be sure the tv is set to the video input you plugged into on the tv input, then take the denon remote and hit the setup button, should show a on-screen setup

Posted on Mar 10, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a Denon AVR 790 for about 8 months now. Hooked up a combo DVD VCR player using the red/yello/white cables. It worked fine for about 6 months. Now I cannot get the DVD or VCR to play. I get sound,...


Hi,
If dvd combo player is only video source connected with Denon AVR 790 then unplug yellow video wire from Denon and plug it directly in TV input, now video signal will go directly to tv and sound will come from Denon AVR 790 speakers during dvd playback.
This is simple bypass that wont effect surround sound of dvd playback.
Let me know if you have additional question.
Thanks.

Oct 20, 2010 | Denon Audio & Video Receivers

1 Answer

Trying to add Wii, but no video only sound.


The manual says you can get an optional Component Video cable (RVL-011) for the Wii. There is apparently one unused Component Input on theDenon where you could connect it. You would still have to use the Red/White analog audio.

The Yellow is for Composite Video only. It's lower quality and not compatible with Component Video (3-wire).

In the short term, why don't you just run the Wii's combined Composite video / analog audio cable to the provided Composite Inputs labeled DVD, VDP, TV/DBS, VCR-1 or VCR-2 on the Denon?

It would not be necessary to have BOTH Composite and Component video from any device, much less the Wii.

Ponder this, why do you need to run the video from anything to the Denon at all if your TV has mutliple video inputs? TV's specialize in video, theDenon specializes in audio. You can always extend the Red/White audio cables to reach the Denon.

May 06, 2010 | Denon AVR-2802

1 Answer

Have digital feed connected (white, red, yellow) to DVD connections 6 & 13. Get picture but no sound. Sound is OK on VID1 input from satelite. Any ideas?


so you have the yellow out from dvd player to yellow in on the receiver (composite video) and the red and white out from dvd player to red and white in on the receiver (right and left audio channel) . you can also plug in the orange rca (digital coaxial audio) go to your menu on the Haman Kardon receiver and make sure you select the right audio input. mine is a Harman Kardon AVR146 push th osd (on screen display) on the remote. go ti the input setup and select the appropriate audio input

Dec 05, 2009 | Harman Kardon AVR 320 Receiver

1 Answer

I want to connect my denon 790 to my 5:1 surround, HDMI DVD player and HD samsung 55'' LCD. what cables do i need and where to put them. thanks


You will need 1 HDMI cable to link between your DVD player and the Denon,plug the HDMI cord into the HDMI port on the back of your DVD player and the the other end into the Denon 790 HDMI port labeled DVD,then you will need another HDMI cord to go between the Denon and your LCD TV,plug one end of the HDMI cord into the Denon 790 HDMI port labeled HDMI monitor out and the other end into one of the HDMI ports on the back of your TV, it doesn't matter which one you use, just remember that you will have to change the input on the tv to that specific HDMI port when you play back a DVD and you will also have to change the Denon to DVD as your source to send the audio through the Denon to your surround sound speakers.( The Denon owners manual will help!!)

Nov 26, 2009 | Audio & Video Receivers

2 Answers

Avr5800 with no on screen display


With some receivers, the on-screen display is limited to a specific video output from the receiver to your TV.

I'm not 100% positive if that's the issue with yours, but it's likely.

If you're connected via Component or HDMI out, you may want to try S-video or composite video.

If that doesn't work, consult Denon to find out which output does your OSD.

Mar 24, 2009 | Denon AVR-5800 Receiver

2 Answers

Denon AVR-1705 Missing Video Functions?


Hello,

What you need to do is connect all your devices to the Denon Using the best connections (Yellow Video=OK, S-Video=good, Component green-red-blue=better and HDMI=best. if you do not have a DVD that upconverts to 1080i or p when using HDMI, I would use component cables where available from your devices to the Denon other wise use the next best connection available and if connecting digital audio make a chart of all connection so you can setup everything when your ready for programming the Denon

Feb 11, 2009 | Denon AVR-1705 Receiver

2 Answers

No system configration display on AVR3300 since moving.


Make sure the S-video and the composite cable are not plugged in it the same time from the Denon of at the Plasma

Jan 19, 2009 | Denon AVR-3300 Receiver

1 Answer

I have a Denon AVR-3808ci. I am having problems hooking up my nintendo 64 to this unit. I am trying to use the 3 line cable which has left/right audio (respectively red/white) and audio (yellow). I have it...


If your amp is not upcoverting the picture you will have to come from the yellow monitor out on the amp to in on the tv,if you have no input on tv use a scart to phono convertor pluged into the scart socket.
hope this helps.
CABLE GUY.

Jun 30, 2008 | Denon AVR 3808Ci Receiver

1 Answer

Denon AVR587 Setup


red/white/yellow = composite
red/green/blue= component video cables + audio cables needed

the red/white= stereo audio

the denon 587 has 2 optical (toslink) inputs and 2 digital coax. These are surround sound cables basically, it's the only way to get true 5.1 dolby or dts.

connect cable box, and the samsung to the sony using hdmi. then connect the cable box and the samsung to the denon receiver with optical cable. And that's it.

Jan 15, 2008 | Denon AVR588 Receiver

1 Answer

How to connect using a LCD monitor, cable box, DVD player


You won't need the VCR, that's only used for a cable box, and since you have one now there is no need. You'll want to connect everything with the better video plugin possible. Composite (red, white, yellow) is the worst, then s-video, then component (red, blue, green), then DVI, then HDMI. That will square your video. Then send all audio signals to the Denon. These cables are usually the red and white cables. OR Plug everything into the Denon to the appropriate input. Then connect the monitor to the video out of the Denon.

Jun 21, 2007 | Denon AVR-886 Receiver

Not finding what you are looking for?
Denon AVR-3805 Receiver Logo

Related Topics:

306 people viewed this question

Ask a Question

Usually answered in minutes!

Top Denon Audio & Video Receivers Experts

 Elex
Elex

Level 2 Expert

49 Answers

jonpoint

Level 1 Expert

4 Answers

Tech Leprechaun
Tech Leprechaun

Level 2 Expert

61 Answers

Are you a Denon Audio and Video Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...