Question about Washing Machines

1 Answer

My roper is spinning out of balance with or without clothes

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 15,935 Answers

Check the Vibration damper rods to be sure that...
1. They are there and mount is solid.
2. If they are broken in 1/2.
3. The plastic knuckle mounts are not missing/broken.
4. There is oil in the shock absorber/spring section of the rods.

Also - there are suspension springs on the bottom of the tub that could be broken and/or missing.

Replace/repair as necessary.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

Posted on Sep 14, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Roper wwshing machine model rtw4640yq1 during spin cycle bounces across the floor


Sounds like your load of clothes are not balanced. Like more on one side than the other.

Oct 17, 2016 | Roper Washing Machines

1 Answer

I have a roper washerm when it spins it makes a lot of noise, but the tub is tight what else can be the problem it only does it on the spin cycle


could be out of alignment use spin cycle without a load to see of its the balance system a mount could be loose

Sep 04, 2012 | Roper Washing Machines

1 Answer

RAS8333RQ3- Leaves clothes extremely wet after last spin cycle


I had a similar problem with my washer. You sound like the problem I had. The basin was off balance due to a belt breaking. So when it spins it was not getting the proper centripical force to drain the cloths. When I called to have it repaired it was pretty penny to replace. All we did was now when the spin is done we just reset it to spin and let it go again. Seems to be fine then. If you take the back off you can see what happens during the spin cycle and if and of the parts are in order. Hope it helps

Dec 21, 2010 | Roper Washing Machines

2 Answers

Maytag washing machine gets out of balance


Maytag uses an auto balancing mechanism, based on the rear legs. These legs should move freely. Lay the machine on its side, and try to move the rear legs. If they won't move and appear rusty, then spray penetrating oil on both legs and move them until they move freely.

Sep 27, 2009 | Washing Machines

1 Answer

Washer washes fine and the water drains but will only spin if you mess with the clothes making them perfectly balanced or you hand start the spin. Roper


sounds like the spin basket drive.. does it agitate ok? if yes get a new washer or change or get a repair man to change the spin basket drive.

May 02, 2009 | Roper RAB5232E

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

43 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

yadayada
yadayada

Level 3 Expert

70346 Answers

Brad Brown

Level 3 Expert

15107 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...