Question about Canon PowerShot A95 Digital Camera

1 Answer

In shoot mode, display does not show picture. I can view old pictures in 'view mode'

Posted by on

  • 2 more comments 
  • TARADINNC Mar 28, 2009

    I can view pictures in view mode.. But the display doesn't work in shoot mode. It started out that it had a line though the diplay. Now its just black with white light sort of in it. I can take pictures fine using the eye viewer but not the display. How do I tell if its that chip or not?

  • Shoaib Rais
    Shoaib Rais May 11, 2010

    if all settings are correct lens opens and retract and everything is ok u can view pics as u said then my friend

    CCD failure (imaging chip) u have to find a new camera bcoz the cost for getting a CCD replaced is as much as gettin a new camera dont waste ur time and money on this

  • Jeff Marcus May 11, 2010

    What camera and model are you using?

  • Anonymous Mar 16, 2014

    When viewing the screen, the picture is reduced. How do I get the normal mode bak on the screen or viewer?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

If the ccd chip is damaged canon will change it for free bcoz it´s a canon fault with the defect ccd sensor

Posted on Mar 16, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I cannot view pictures on my SD card on my Kodak c703.but can view them on an other camera.Any advice please


You only can view pictures shot in the same camera. Although a camera has a micro processor, it does not have the same viewing possibilities as a computer. Sometimes when you not even see your own pictures, shot in the camera, pressing the display button several times can help or putting the camera in viewing mode. If Notting works, and you even can see something on the display while shooting pictures, you have to fear the display is defect.

Mar 14, 2015 | Kodak Cameras

1 Answer

My camera will turn on then go off and the lens will not go out how do i fix this?


The manual is a bit confusing. I do have a power shot, but is is a bit younger. My camera does have 2 On buttons. One to put it in shooting mode. And one to set it in display mode. If I press the display button (arrow right) the lens stays where it is and I only can see pictures I took. When I press the on off button the lens comes out.
I think you only have to switch the main dial to the camera logo (shooting Mode) and then press the Disp button, to shoot pictures and if you want to view pictures, you turn the dial to playback Mode (arrow to the right) and press the Disp button.
If it works, no fix, just knowledge about how the camera works. It is all in the manual.

Jan 14, 2014 | Canon PowerShot A520 Digital Camera

1 Answer

My olympus e volt 500 will not display image when in shoot mode


There is a little button on the back, marked 'info'. Press it to switch from picture view to settings view. It also operates the viewfinder.

Olympus also has a good photo editing program that is free and it allows you to edit photos and stitch pictures taken pn panoramic mode into one panoramic picture. It's called Olympus Master.

Dec 12, 2012 | Olympus EVOLT E-500 Digital Camera

1 Answer

Canon eos rebel xsi screen is black when taking a picture but shows picture afterwards..Menu works also so screen works but just black when trying to take a pic..


Set the shooting mode to a Creative Zone mode. Press MENU to enter the menu. Under the Setup tab, select [Live View function settings] then press SET. Select [Live View shoot] and press SET. Select [Enable] and press SET. Press MENU to exit the menu. Press SET. The image should now appear on the LCD instead of through the viewfinder.

Refer to "Live View Shooting," Chapter 5 in the manual for more details and the limitations of the LiveView mode.

Dec 26, 2010 | Canon EOS Rebel XSi Digital Camera

1 Answer

Cannot see what im shooting and on lcd screen,no picture jus black. It shows numbers timer everything else except picture. In play mode everything works fine.


I have 2 xelim camaras. One of which has a piece of some type of cover partially obstructing the view. This camara still displays the time and menus and older pictures. If I take pix now the picture is obscured. The other camara has no picture on the display but when I take a picture it turns out just fine. That camara will need disassembled and a connector hooked back up

Most screens on digital camaras are for aiming the camara and output (displaying the picture) therefore any problems with the screen do not translate to a picture.

Oct 23, 2009 | Canon ZR85 Mini DV Digital Camcorder

1 Answer

Shooting mode shows nothing.


Hello,

I just had this issue with my camera (my 15 year old son solved it for me ;-) ).

The viewfinder was active in "record" mode and the LCD was "active" because you could see a little back light but no image. The "playback" mode would let me review pictures in the LCD though so I know it is capable of showing information.

If you push the display key/button a couple of times you can see the picture move from the viewfinder to the LCD and have just a picture and or a picture and information.

So try setting the camera to "record" mode (lens comes out) and then push the "display button" which is on the back of the camera just to the right of the LCD on the lower right side several times and see if the LCD starts to work.

It could be that somehow the display button was pushed by mistake.

Bill

Dec 07, 2008 | Canon PowerShot S3 IS Digital Camera

1 Answer

Picture screen


You can choose whether or not to display the picture you have just taken on
the monitor.
ON : The picture being recorded to the card is displayed. This is useful for
making a brief check of the picture you have just taken. You can
resume shooting anytime during REC VIEW.
OFF : The picture being recorded to the card is not displayed. This is
useful when you want to prepare for your next shot while the
previous picture is being recorded.
1 In the shooting mode top menu,
select MODE MENU
 SETUP 
REC VIEW  OFF or ON, and press

Jun 25, 2008 | Olympus Camedia C-350 Digital Camera

1 Answer

Canon A75 No startup sound & display on LCD, rest of things works fine


Think it might be your batteries. 700mah batteries are pretty weak by today's standards (most are at least 2,500 mah these days). I'm guessing your batteries are several years old? If so, they're really only meant to have a usable shelf life of a few years, whether they are used or not. Recommend trying a new set of rechargeable batteries.

Mar 20, 2008 | Canon PowerShot A75 Digital Camera

Not finding what you are looking for?
Canon PowerShot A95 Digital Camera Logo

Related Topics:

121 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Cameras Experts

kakima

Level 3 Expert

102366 Answers

TC CAMERA REPAIR.Com...

Level 2 Expert

165 Answers

old marine
old marine

Level 3 Expert

1814 Answers

Are you a Canon Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...