Can I buy a removable Bumper Bar for my Bertini Shuttle pram??
I have been given a Bertini Shuttle Pram. The toddler seat and skate board boot and rain cover were included but the bumper bar is missing. Where can I buy a removable bumper bar for my Bertini Shuttle pram??
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hi, you have to remove the bumper bar and the hood, then click the toddler seat into the opening that the hood goes into, once in, you can then refit the hood but you are unable to use the bumper bar with the toddler seat in position.
This pushchair looks like mine and Iam selling the bit"s for spares as the chassis is broken ,I have a set of staps in good condition if your interested ,I am in York 01904637432.(there black in colour).
You will need to recline the main seat unit fully (undo the zips on the inside of the seat unit) and attach the toddler seat on top (with two right angled connectors put into the slots where the bumper bar clicks).
With this setting, you will be able to use this for a toddler and newborn.
You can not get a manual any more as they are not made. They are releasing a new seat in Feb 2010. This works in an identical way so I have been told. I have the old seat. It is easy to understand how it is fixed, but I would have a strong man to help, it can be tough.
Step 1 : locate bumper bar and with an alan key undo the two black clips either side that hold it together. Remove bumper bar from pram, Keep the two clips on the pram with the opening facing up.
Step 2 : With your toddler seat you should have another two of these black clips, place these two on the pram in the same way, but as far forward as they will go.
Step 3 : On your seat either side of the black knob that reclines the seat you will find two holes, simply place the seat lined up with the clips, put the screws with the clips threw the clips and the holes in the seat place, put the other side of the screw on and tighten. Thats it seat on.
hi I think I could help I bought a bertini shuttle as well if you stand behind the pram on the right run your hand down the right side of the hood there is a push up lever there mine is grey ok you need to push the grey? lever but also on the left and right there is a black lever you must push up al together hope this helps good luck from debbie