Question about York Barbell Home Use Fold-Up Treadmill
That error code mean you motor is not getting the correct signal to operate the drive motor. You will need unplug unit then take the motor shroud off visually inspect all connectors then make sure all of them are seating solid in their connectors. then plug the unit in check an see if the L E Ds have lit on lower electronics board then get on unit and with your foot proceed to move the belt while doing that hit your start button and see if that error code come up. At this point we are checking the speed sensor to see if it is functional. Now if your upper console is registering its showing speed and time moving forward this also tells us that the communication between the two boards are fine. Now stop this process and you should have the error 1 show on the console. If you have a multi meter handy find the two leads coming form the motor going to the board unplug them put the two leads into the connector switch the meter to dcv 100v range and proceed to move the belt in the previous now the motor has become a generator and if function you should be getting a dcv output if not the it telling either worn motor brushes or open winding in the motor now if you get a reading then that lower board is defective. Then call York and get pricing on the defective part.
Posted on Apr 11, 2010
You May have to go York in the UK to purchase parts or they may be able to direct you to a dealer Sorry Can't be more helpful.
Posted on Jul 20, 2010
Tips for a great answer:
Oct 22, 2016 | York Treadmills
Jul 15, 2015 | York Treadmills
Feb 04, 2013 | York Treadmills
Feb 28, 2012 | Treadmills
May 14, 2011 | York Treadmills
Jul 10, 2010 | York Treadmills
Apr 11, 2010 | York Barbell Home Use Fold-Up Treadmill
Jan 25, 2010 | York Treadmills
Oct 05, 2009 | York Barbell Home Use Fold-Up Treadmill
353 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: