- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The Model & Serial #'s would help me refine your answer.
I will assume you have either Whirlpool, Kitchenaid or
Sears Kenmore. The blinking red light should be binking as
a pattern of 2 blinks followed by a pause. then Repeats.
Lift the trap door and look at the icemaker, the 8 little fingers should
be parked at upright and slightly leaning forward towards you.
Carefully check to see if you have ice inside the mold behind and
below the fingers. If you feel a curved surface there's no ice..
Next precisely measure 5 ounces of water and carefully place
the water into the mold. Any where behind any finger.
Wait a couple hours and check if cube have ejected out into your
emptied bin...If after several hours and NO ice, most likely the icemaker has gone Kaput! Order and replace it. For detailed video go to YouTube and watch how to remove the icemaker.
Search using the words: Whirlpool In-Door Ice Maker Replacement.
Watch the video before attempting removal..Tricky.
Correct me im mistaking but is that a buildin kitchenaid. If it is there is a service flash for evaporator fan motor. If you already changed the main board then the only other thing that can cause that is that service flash is a kit evaporator fan and the Bimetal. I would suggest to call kitchenaid and get the part number unfortunately I dont have it handy. But most likely thats the problem.
You would be safe if you used the current dimensions for todays
18cf Top freezer ref. 28" w x 67.5" h x 31" d
You are right no published spec's left too old I guess?
May I suggest measuring the space allowed for the fridge?
Measure Exterior Height & Width and Depth for Dimension. Interior Space = Then, Measure all open accessible area inside the fridge and add the two together, following the formula of H+W+L Freezer and H+W+L Refrigerator,add together and BAM ya got cubic inches.= Square inches, then divide by 1,728 (the number of cubic inches in a foot (3) Cubed. Example 1: 60 inches tall, 42 inches wide, 30 inches deep = 75600/1728 = 43.75 Cubic Foot AREA Example 2: fREEZER dIMS = 24 DEEP x 18 HIGH x 36 WIDE =15552/1728 is 9 CuFt. Refridgerator 36 wide, 36 high 28 deep = 36,288/1728 = 21 CuFt. + 9 CuFt. = 30 Cubic Foot Capacity. By the Math Wiz RUDY :)