Question about Panasonic Panafax UF-9000 All-In-One Laser Printer

1 Answer

Panasonic uf-9000 how do you set the ip address and gateway address

Posted by on

  • michenter Mar 09, 2009

    i did that but the ip address never came up

  • Anonymous Apr 09, 2009

    where do i get the IP address from?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 2,120 Answers

Function
71
set

keep pressing set until you get to ip address

key in with the keyboard

Posted on Mar 09, 2009

  • Renee Batey
    Renee Batey Oct 22, 2013

    This does not work. There is no IP address option in function 71.

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What can do to configure my bizhub c300when network setting did not display?


Go to Admin mode, then network, TCP/IP, then enter the IP address, subnet and gateway. SET FOR STATIC IP not DHCP!!!!!!!

Default admin pw 12345678

Feb 13, 2015 | Konica Minolta Bizhub C300 All-In-One...

3 Answers

Kyocera printer hookup to iMac using Ethernet connection


check the network printing settings in the printer, its a problem in the settings somewhere, unless theres a fault somewhere.

Jul 24, 2008 | Kyocera Mita FS 3800 Laser Printer

1 Answer

Need ip address for DI3010f


Your network determines that! To load your IP address once you have it go 1. Admin Management 2.Admin Settings #2 3. Network Settings, 3. Network Settings #1 Basic Setting and then place IP address Gateway and Mask. RECOMMEND YOU USE static IP not DHCP which then the sever determines your copier IP Not good

Apr 03, 2014 | Minolta Di3010f Printer

2 Answers

Ip address IR2800


You need to tell copier the IP, gateway and subnet. If you have DHCP set Ip on auto.

Jan 27, 2010 | Sharp AL-1642CS Copier

1 Answer

I have a Dell Printer 5100cn it is tied into ten PC's through a router, no Server. The IP address keeps changing, and I can not figure out how to set it manually. The other Dell printers let me set-up...


Why do you need to set it manually? More than likely this is because of DHCP settings on the network which keep issuing a new IP address...anyways...here are the instructions....
To set the IP address, subnet mask, and gateway on the printer to match the printer settings page, perform the following steps:
  1. Press the Menu button.

  2. Press down%20arrow%203100cn.jpg until Configure appears, and then press right%20arrow%203100cn.jpg or return%20arrow%203100cn.jpg.

  3. Press down%20arrow%203100cn.jpg until Network appears, and then press right%20arrow%203100cn.jpg or return%20arrow%203100cn.jpg.

  4. Press down%20arrow%203100cn.jpg until TCP/IP appears, and then press right%20arrow%203100cn.jpg or return%20arrow%203100cn.jpg.

  5. Press down%20arrow%203100cn.jpg until IPAddressSetup appears, and then press right%20arrow%203100cn.jpg or return%20arrow%203100cn.jpg.

  6. Press down%20arrow%203100cn.jpg until Panel appears, and then press return%20arrow%203100cn.jpg.

  7. Press the Cancel button.

  8. Press down%20arrow%203100cn.jpg until IP Address appears, and then press right%20arrow%203100cn.jpg or return%20arrow%203100cn.jpg.
    The cursor is located at the first digit of the IP address.

  9. Press down%20arrow%203100cn.jpg to enter the numbers for the IP address.

  10. Press right%20arrow%203100cn.jpg.
    The cursor moves to the next 3 digits of the IP Address.

  11. Repeat steps 9 and 10 to enter all of the digits in the IP address, and then press return%20arrow%203100cn.jpg.

  12. Press the Cancel button.

  13. Press down%20arrow%203100cn.jpg until Subnet Mask appears, and then press right%20arrow%203100cn.jpg or return%20arrow%203100cn.jpg .

  14. Repeat steps 9 and 10 to set Subnet Mask, and then press return%20arrow%203100cn.jpg.

  15. Press the Cancel button.

  16. Press down%20arrow%203100cn.jpg until Gateway Address appears, and then press right%20arrow%203100cn.jpg or return%20arrow%203100cn.jpg.

  17. Repeat steps 9 and 10 to set Gateway Address, and then press return%20arrow%203100cn.jpg.

  18. Turn off the printer, and then turn it on again.

Jul 20, 2009 | Dell Printers & Copiers

1 Answer

How to give ip address to workcentre m133 network printer


: You must be a System Administrator to perform this solution. 1. Press the [Log In / Out] button on the Control Panel. The Login screen will be displayed. 2. Enter the System Administrator userID using the numeric keypad on the Control Panel, or select the [Keyboard] button on the Touch Screen to enter the userID, and then select [Save] on the Touch Screen. 3. If necessary, enter the System Administrator password using the numeric keypad, or select the [Keyboard] button to enter the password, and then select [Save] on the Touch Screen. NOTE: The default userID is 11111, and the default password is x-admin (must be entered in lower case). If the userID and / or password have been forgotten, a service call must be placed. 4. Select [Confirm] on the Touch Screen. The System Administrator Menu screen will be displayed. 5. Select [System Settings] twice. The System Settings screen will be displayed. 6. Select [Network Settings]. The Network Settings screen will be displayed. 7. Select [Protocol Settings]. The Protocol Settings screen will be displayed. 8. Select [TCP/IP - Get IP Address], and then select [Change Settings]. The TCP/IP - Get IP Address screen will be displayed. 9. Select [Manual], and then select [Save]. The Protocol Settings screen will be displayed. 10. Select [TCP/IP - IP Address], and then select [Change Settings]. The TCP/IP - IP Address screen will be displayed. 11. Enter the machines IP Address using the numeric keypad, and then select [Save]. The Protocol Settings screen will be displayed. 12. Select [TCP/IP Subnet Mask], and then select [Change Settings]. The TCP/IP Subnet Mask screen will be displayed. 13. Enter the machines Subnet Mask using the numeric keypad, and then select [Save]. The Protocol Settings screen will be displayed. 14. Select [TCP/IP Gateway Address], and then select [Change Settings]. The TCP/IP Gateway Address screen will be displayed. 15. Enter the machines TCP/IP Gateway Address using the numeric keypad, and then select [Save]. The Protocol Settings screen will be displayed. 16. Select [Close] three times. 17. Select [Exit]. The machine will reboot automatically.

Jun 09, 2009 | Xerox WorkCentre M15i Laser Printer

1 Answer

Dont know ip for my Sharp AR_C270 i just bought


Find out what the gateway setting are on your computer and assign an ip address based on the gateway.
For example if your gateway is 192.168.0.1  then a good ip address would be 192.168.0.XXX.  xxx=available ip address to use.
Your copier does have a DHCP setting that allows the router to assign on automatically for you if the copier is connected to one but you should assign that ip address manually after using DHCP because if the power goes out, it could assign a different one than the previous assignment making the IP port assignments to print with on your computer useless without creating a new port.

Oct 19, 2008 | Sharp AR-C270 Color Copier

1 Answer

Putting right the ip address ?


Before you proceed you need to know the static IP, Subnet Mask and Gateway address for this printer. Once you have them: -Enter the menu mode by pressing the + button -Press the + button till you come to the Network Menu. -Press the Enter button. You should now see TCP/IP. Make sure it says Enabled which is the default setting. -Press the + button till you come to IP address then press the Enter button. - IP addresses (for now) consist of four octets or four groupings of three numbers such as in this example *192.168.001.123*. Using the + or - buttons (+ counts up 0,1,2,3?.; - counts down 255,254,253?..) you are going to set the number of the first octet or in the case of the example *192*. Once you?ve set it correctly hit the Enter button. -Do the same for the other three octets. Hitting the Enter button after setting the fourth octet will set the new IP and take you back to the TCP/IP menu. - Press the + button till you see Subnet Mask and press the enter button. - Just like the IP address the Subnet Mast consists of four octets. Set the value to you needs just as you did with the IP address. Again when you hit the enter button after setting the fourth octet you will be taken back to the TCP/IP menu. - Again press the + button till you come to Gateway Address and hit enter. Enter the Gateway IP address exactly like you did when setting the IP address. Don?t forget to hit the enter button to set the address. You should now be at the TCP/IP menu again. -To exit the menu press the On-line button on the printer. Your printer should now be configured with you IP address, subnet mask and gateway address. As an added check I would go back into the menu by pressing the + button, going into the Information Menu and printing selecting the Print Menu Map option. Verify the setting we just made with what is printed out at the top of the page. If everything matches you?re ready to go! Let us know how it goes and please don?t forget to rate this posting.

Jan 22, 2007 | OKI C5100n Laser Printer

2 Answers

Loss of ethernet card after reset


u need to put the right IP again, do u know how to do it??? if don´t ask again.

Jan 13, 2007 | OKI C5100n Laser Printer

Not finding what you are looking for?
Panasonic Panafax UF-9000 All-In-One Laser Printer Logo

Related Topics:

597 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Printers & Copiers Experts

Mohan Sriraman
Mohan Sriraman

Level 2 Expert

490 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Cindy Wells

Level 3 Expert

4758 Answers

Are you a Panasonic Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...