Question about Konica Minolta bizhub C250 All-In-One Laser Printer

1 Answer

If I clean out the water toner cartridge on a SM

If I clean out the waste toner cartridge on a KM Magicolor 7450, and put it back into the unit, will it work? Or is there a counter on it which will prevent it from working?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

It will be fine just be sure to put it in a plastic bag and shake it out. Cuase it will go all over the place. Those are always back ordered and can never get one when you need it. Just be sure to clean the waste toner cart before putting it back into the unit.

Posted on Mar 25, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I've replaced the toner cartridge and waste toner bottle, but the display still says 'toner low' and 'waste toner near full'. It refuses to print, even with the old cartridges.


Then you mite want to clean the sensor that monitor the waster toner box pull out the waste toner box and look for the area that show clear plastic then look for those area of the machine and blow the old toner from those areas waste toner mite have gotten on the sensor saw they can not see the clear plastic and think that the waste toner cart is still full.

Sep 09, 2014 | Konica Minolta Magicolor 5670EN Color...

1 Answer

Konica Minolta Unit A-1 empty


Yes they are the Image unit, replace the one required, they are not toner.

May 19, 2014 | Konica Minolta Office Equipment & Supplies

1 Answer

Magenta toner cartridge missing


Bring the cartridge out shake it well and insert it again.Now test the print and check it.if it is still missing then call your technical service representative or simply buy a new cartridge because it will be very difficult for you to handle this problem by yourself.

Dec 20, 2013 | Office Equipment & Supplies

1 Answer

Emptying waste toner BizHub C250


It has the facility to empty the waste toner cartridge manually.You do not need to buy new one.

May 15, 2012 | Konica Minolta magicolor 5430 DL Laser...

1 Answer

How can I remove the drum from the printer?


Replace the drum unit.
Description:
Follow the procedure below to replace the drum unit.

The Brother machine has separate consumables the toner cartridge and the drum unit. Verify you replace only the drum unit and not the toner cartridge. If you want to know their difference, refer to "What is the difference between the toner cartridge and the drum unit?"

Caution Do NOT use flammable substances near the machine. Do NOT use any type of spray to clean the inside or outside of the machine. Doing this may cause a fire or electrical shock.
spray1.gif Caution
  • While removing the drum unit, handle it carefully because it may contain toner. If toner scatters on your hands or clothes, wipe or wash it off with cold water at once.
  • After you have just used the machine, some internal parts of the machine will be extremely hot. When you open the front or back cover (back output tray) of the machine, DO NOT touch the shaded parts shown in the illustration. If you do this, you may get burned.
hot.gif
  1. Open the front cover.
replacedrum_01.gif
  1. Slowly take out the drum unit and toner cartridge assembly.
replacedrum_02.gif Caution
  • We recommend that you put the used drum unit and toner cartridge assembly on a clean, flat surface with a sheet of disposable paper or cloth underneath it in case you accidentally spill or scatter toner.
  • To prevent damage to the machine caused by static electricity, DO NOT touch the electrodes shown in the illustration.
static_elect.gif
  1. Push down the green lock lever and take the toner cartridge out of the drum unit.
Note Discard the used drum unit according to local regulations, keeping it separate from domestic waste. Be sure to seal up the used drum unit tightly in a suitable bag so that toner powder does not spill out of the unit. If you have questions, call your local waste disposal office.
Caution
  • Wait to unpack a new drum unit until immediately before you put it in the machine. Exposure to direct sunlight or room light may damage the drum unit.
  • To avoid print quality problems, DO NOT touch the shaded parts shown in the illustrations.
notouch_01.gif
  1. Unpack the new drum unit.

  2. Put the toner cartridge firmly into the new drum unit you hear it lock into place. If you put the cartridge in properly, the green lock lever will lift automatically.
Caution Make sure that you put in the toner cartridge properly or it may separate from the drum unit.
replacedrum_03.gif
  1. Clean the primary corona wire inside the drum unit by gently sliding the green tab from right to left and left to right several times.
Caution Be sure to return the green tab to the home position (1). If you do not, printed pages may have a vertical stripe.
replacedrum_04.gif
  1. Put the new drum unit and toner cartridge assembly in the machine.
replacedrum_05.gif
  1. Press Clear/Back.

    For MFC users:
    To confirm you are installing a new drum, press 1.

    For DCP users:
    To confirm you are installing a new drum, press the Up Arrow key.

  2. When the LCD shows Accepted, close the front cover.

Jan 09, 2012 | Brother MFC 7840W Printer

5 Answers

Check Waste Toner Box message


Clean the neck of the bottle and the black sensor the neck sits in.

Feb 04, 2009 | Kyocera Mita FS 1900 Laser Printer

2 Answers

How to clean waste toner bottle


Disposal Tank is on the Process Unit... you will have to remove the screw on the left side then pour it out on the bag...

Aug 14, 2008 | Kyocera KM-1505 Copier

2 Answers

Magicolor 2300dl


Clean the fuser, opc drum, and the basic inside of the printer with a vacumm. Suck don't blow with the vacuum.

Aug 27, 2007 | Konica Minolta magicolor 2300DL Laser...

Not finding what you are looking for?
Konica Minolta bizhub C250 All-In-One Laser Printer Logo

136 people viewed this question

Ask a Question

Usually answered in minutes!

Top Konica Minolta Office Equipment & Supplies Experts

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

5729 Answers

David Burkhart
David Burkhart

Level 2 Expert

207 Answers

George Mclaughlin

Level 2 Expert

333 Answers

Are you a Konica Minolta Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...