Question about Home

1 Answer

Saniflo keeps blocking?

A couple of months ago our saniflo was replaced due to various things wrong with the original. Was cheaper to replace. My letting agent agreed to that and a saniflo plumber carried out the job, he actually commented on how clean the system was (mostly due to it flushing all night i may add). He had to wait on a new flush syphon as this had also broke and would be back to complete the job. He never returned as my agent stated he was a cowboy? Basically they have used there regular plumber who hasn't a clue and since then the system backs up or blocks on a monthly basis. I don't flush anything other then regular loo roll and little of it and can't understand why it keeps occuring, On one occasion he pulled out a wet wipe which my sister owned up to, but other then that its loo roll. He won't show me whats blocking and to be honest his english is poor i wouldn't understand?! But back to my question, my shower and bathroom sink plugs are also blocking or very slow to drain as if they had a blockage too, is it possible the outlets are connected or would you need to see to say? He is meant to be looking at it tomorrow and i'm going to the letting agents to look at the evidence that they have collected on me, as i don't understand how this could be? Becoming paranoid to use the loo.

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has answered 1,000 questions.

  • Master
  • 1,605 Answers

Do you have cess pool or city drain.
if it is cess pool , you need to pump it out. IT IS FULL. if it is city, you need a plumber to check the drain to the city line.

Posted on Mar 25, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Repairman can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Repairman (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I make one or two short calls and I have to charge my phone

If the phone has been used a lot, or is more than 12 months old, your battery is weak. It may keep your phone on for a couple of days without use. or be able to send and receive messages with no problems but transmitting stresses the battery a lot more. I suggest a new replacement battery, an original Alcatel one would be best, but very expensive. It might be cheaper to get a new phone/contract and certainly it would cheaper to buy a substitute on ebay.


Nov 05, 2015 | Alcatel Cell Phones

1 Answer

My car wont start engine turns over but doesnt start like ist recieving no gas

Considering it ran fine after pump replacement for awhile then it is probably a fuel issue. Couple things it could be. 1. you could have a ton of sediment in gas tank and it keeps clogging up your pump. 2. you could have blocked fuel filter and or clogged injectors.

Oct 31, 2012 | Chevrolet Cars & Trucks

1 Answer

My 97 Chevy Suburban keeps leaking a lot of antifreeze, I just had the water pump replaced a month ago, so what's wrong with my truck?

There are a couple of things that could be wrong. 1. The new water pump has failed. This is called infant mortality. It happens sometimes. 2.Sometimes the waterpumps are not assembled correctly by the manufacturer and the diaphragm bolts were not tightened creating a leak. 3. The gasket may not h ave sealed properly. All of these require removal of the water pump and inspection to find the root cause.

Sep 22, 2010 | Chevrolet 1500 Cars & Trucks

1 Answer

I fitted a saniflo plus about 3 months ago engineer been out 5 times even changed unit last engineer said it was toilet paper stuck in tiny hole at bottom of motor he said it was due to not flushing...

This could be a problem with the capacitor which drives the blade and impeller. If it goes bad it will pump water only but when solids are flushed, it will jam the blade and cause it not to spin. You may have to replace the capacitor/condenser.

Nov 29, 2009 | Saniflo SaniPlus-Round SaniPlus Macerator...

3 Answers

Cleaning tank on Saniflo/Sanibest

We have a maserator in en-suite which serves the toilet & shower, We moved in to house 6 years ago and it was already here. After having guests stay a couple of months ago the maserator hasnt worked properly. When we flush the toilet, the water rises and whilst the cistern is filling with water, there is a humming noise for a couple of minutes, then the water rushes back down and there is a clonk and the water bubbles back up through the shower plug hole.Any suggestions as to what this problem is & how to fix it please?

Aug 09, 2009 | Saniflo & Saniplus& Macerator Pump

1 Answer

Line across my laptop screen

The graphics part of the laptop is going out. Recommend just replacing the laptop, it would be cheaper.

Jun 10, 2017 | Computers & Internet

Not finding what you are looking for?
Home Logo

Related Topics:

861 people viewed this question

Ask a Question

Usually answered in minutes!

Top Home Experts

john h

Level 3 Expert

12744 Answers

Tom Chichester

Level 3 Expert

39260 Answers

Brad Brown

Level 3 Expert

16621 Answers

Are you a Home Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides