Question about Kitchen Ranges

3 Answers

I have a Chef Sapphire elevated cooker that needs repairing. A second hand replacement would be an option.I live in Perth. There are new models out but are about 15mm too wide. The width required is 1070mm. Any recommendations.

Posted by on

  • jancol Mar 09, 2009

    My original message stated that the width required was 1070mm. I have already reserched the new Westinghouse models and they are all 1085mm. What about second hand or repairers?

×

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 10,515 Answers

I believe so the only option around the same would be an electrolux elevated cooker.As you live in australia, so let me offer you a link for australian website :-

http://www.electrolux.com.au/

Thanks.

Posted on Mar 09, 2009

  • Level 1:

    An expert who has achieved level 1.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Contributor
  • 728 Answers
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 916 Answers

Here is a list of some possibilities for you: Click Here

Posted on Mar 08, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The lighting of my magic chef oven is inconsistent and is completely unpredictable. i live in a rental and the oven does not belong to me, however whenever i have called maintenance to have them fix my...


Hi,

The ignitor is not working right and is going bad....
have the repair man replace the ignitor, or DIY....
Check out this tip about your problem...

Oven not Working or Oven not Heating

Oven Problems Replacing the Igniter


heatman101

Jan 08, 2011 | Magic Chef 31100 Gas Kitchen Range

1 Answer

Searching for plastic push on control knobs


Hello.

I search it however, not to find the replacement parts, in this case i would rather suggest you to contact the vendor of your kleenheat, maybe they know where to find the service center of that machine or their tech maybe can cater the problem.

mlenavz

Apr 01, 2008 | Magic Chef 31000 Gas Kitchen Range

1 Answer

Tricity Sovereign keeps overheating


Sounds like the RTD could be going bad. An RTD is a resistive temperature device which means it changes resitance over temp. If that is bad it will cause the oven to go into thermal runaway. A secondary option woul be that the oven controller circuitry is bad. You could replace the RTD yourself however the oven controller would require either a repair by a technician or replacement by the manufacturer. If it is under warranty I suggest asking them first.

Dec 14, 2009 | Kitchen Ranges

1 Answer

NEED TO REPLACE THE OVEN SENSOR HAVE AN F3 ERROR ON MY MAJIC CHEF 64HA4TKVW CAN WE REPLACE OURSELF CAN'T FIND MANUAL THANKS


The following link explains how to replace an oven probe on most ranges:

http://www.fixya.com/support/r393313-checking_replacing_oven_probe

This is not a difficult repair. The oven probe on this model is located along the back wall of the oven on the right hand side. Make sure you follow all safety precautions when servicing the range. UNPLUG the appliance before attempting any repairs. Dangerous voltage is still present even when the range is turned off.

The part number for a replacment probe for the model you have listed is 12001655 and can be purchased at appliancepartspros.com for about $25.

If you have any questions about this repair, or require additional assistance, please let me know. I hope this helps you.

Nov 01, 2009 | Kitchen Ranges

1 Answer

Oven not lighting on CGR3742CDC Magic Chef


You need a new gas valve replaced on this unit. This is a simple repair that you can perform yourself. Just contact us at accurate-appliance-service.com and we will get the correct part out to you asap.

We hope this helps and we look forward to working with you soon.

Oct 27, 2009 | Magic Chef CGR3742 Gas Kitchen Range

1 Answer

How to fit main oven door on stove 1200 Range cooker 100 DFA


Open the door part way, then grasp the door on either side and lift up and out to release the hinge.

Jul 13, 2009 | Kitchen Ranges

1 Answer

Need manual for Britannia ilve range cooker


You may have the cooker oven set to automatic. Phone their Service Team on 01253471111 option 3. They will help you fault find. The ID strip with all the cooker information is inside the right hand oven on th right hand side.

Jun 08, 2009 | Britannia SI10T6L Dual Fuel (Electric and...

1 Answer

REPLACEMENT COST OF MAGIC CHEF ELECTRIC RANGE MODEL 6898XVB


you should be able to buy one for between 400 to 600 dollars new.i would check lowes or home depot to see what they have in stock.

Jan 13, 2009 | Magic Chef CES3760 Electric Kitchen Range

3 Answers

Flavel Milano 100


Hi all...

Yep got the main oven gone......
Lucky iam good with electrics, got my brother in law to double check Qualified Elctrician it turns out that its the Thermal Fuse that has gone have ordered a new one at the cost of £8.......
This range is made by Beco thats why its hard to find info on the cooker.. The grill/fan oven has thermal fuse as well.....
Hope this helps MVE

Aug 11, 2008 | Kitchen Ranges

Not finding what you are looking for?
Kitchen Ranges Logo

Related Topics:

206 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kitchen Ranges Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Electrolux
Electrolux

Level 3 Expert

4342 Answers

Are you a Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...