Question about Albatron PM266A Pro (PM266APROBULK) Motherboard

1 Answer

Albatron PM 266A Monitor drivers

Rebuilt windows on PC with motherboard Albatron PM 266A. CRT monitor works ok but if connect to Samsung SyncMaster 510n flat screen all ok on loadup but after a few minutes screen goes black and get box moving around screen with the following message. "Not optimum mode recommendedmode 1024 X 768 @ 60 Hz.
I have set up display is control panel to to 1024 X 768. can't find any driver for motherboard.
Adapton = S3 Graphics ProSavage DDR

Can anybody help please

Posted by on

  • Nerijus Mazuolis May 11, 2010

    its the microchips NT68F63L problem on vga board. you need to open
    monitor to solve the problem. there are more than 3 ways how to repair.
    Can you open the monitor ??

    or

    if you want there is manual how to repair samsung monitors with this
    problem you can find on ebay: Repair manual Samsung monitor 710n, 913v,
    510n and more, Item number: 220389041052.

    it shows step by step reparation process.

  • Ben Wabnick
    Ben Wabnick May 11, 2010

    Have you tried changing the resolution in the display panel to 800x600 just to see if you can at least get a display with it set to that resolution?




×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have a PM266A Pro but I need the drivers and I lost it,what can I do..please someone can help me I thanks so much ...paul.

Posted on Aug 14, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi, I have an HD Pavillion desktop pc with the monitor and keyboard that came with it. The PC powers up, np. However the video signal does not seem to go to the monitor. The monitor says no dsub...


Hello hervechatagn,

go to this "Website," to "Update the Drivers."

"You may need to 'disconnect' the {Monitor and Keyboard} first, before "Downloading the Drivers!"

"Fill-in" or {Choose} any information needed to get the "Drivers" you need.

Than you'll be able to "Download the Drivers."


If this information helped? Return and give a "Helpful Rating," please!
Thanks, paul7of9
Click here: http://h20180.www2.hp.com/apps/Nav?lang=en&cc=us&h_pagetype=s-001&h_cc=us&h_lang=en&h_product=12455

Feb 26, 2011 | Motherboards

1 Answer

Hello,I have PC with Albatron PM 800 Pro MB,I tried to reinstall XP, but no way, during instalation HDD could not been found.I've checked with some my friends,and I was told that I need SCSI driver for...


A SCSI driver will not help, different interface. Try and check the connectors first and while you have the case open you should check to see if the drive is getting power. It will give a very slight vibration if the motor is turning.

Feb 24, 2011 | Albatron PM800 Pro Motherboard

1 Answer

I have two monitors. One Samsung SyncMaster 2233 an one Samsung SyncMaster 2243. My problem is that the SyncMaster 2233 for some reason is totally black. I'm usually not terrible with these things, but my...


You're using dual monitors and one is black? If so-- when you switch the cables on the monitors.. the same monitor stays black? This sounds like bad monitor. If I understand you right.

Feb 10, 2011 | Motherboards

1 Answer

Albatron k8x800 pro motherboard


Make sure you have the CMOS jumper set properly.
Also, make sure you are using the correct memory.
Are you certain that the video card is ok? You might want to try a
different one. There are any number of things that could be going on.
Please try these and get back to me..Thanks

Apr 27, 2010 | Albatron K8T800 (K8X800 PRO LL)...

1 Answer

Why is my Monitor blank when i switch on the pc?


Normally, blinking indicator lights and no display on the monitor indicating a wrong resolution or refresh rate frequency, that the monitor can not display it.
To fix, enter safe mode, and configure the display to the lowest resolution. After restart, you should be able to have the display.

Dec 31, 2008 | Intel D945GCCR Motherboard

1 Answer

Can't install driver


if you have the Driver Disk of the monitor then you have select install manually and then press have disk and give it the path and select the driver for the monitor.

Jan 04, 2008 | Intel SYNTAX S651M SIS651 mATX (SYNTAX...

1 Answer

Samsung tv


Your ATI has two DVI connectors but your monitor can only take CRT. In the box came an adapter to change your video signal from DVI to CRT. You connect this to your monitor cable & hand tighten the 2 screws, this connects to the video card. While in windows open control panel, than open Display than click Settings. Click Advanced. Among the tabs here, there should be a tab that says Catalyst Control Center. This is where you setup your display. You can't be switching between the two DVI ports. Ya need to stay with one. The second is for another monitor.
In here is also Help. The control center will help you adjust your adapter. If you do not have the Catalyst Control Center you'll have to download it from this link: http://ati.amd.com/support/driver.html
Enjoy!
Please vote...

Nov 05, 2007 | Power Color PowerColor ATI DVI Adaptor for...

2 Answers

Still got driver problems ...i guess


hi, this what i think is the problem the operating program your using now is wrong for the monitor coz to my expirience some monitors can't handle winxp,winvista or the other thing is that you have not found the right software for the monitor . Do research good luck

Jul 17, 2007 | Intel SYNTAX S651M SIS651 mATX (SYNTAX...

3 Answers

Video controller driver problems ...i guess


Let's backup a minute. What Version of Windows are you running?

Jul 02, 2007 | Intel SYNTAX S651M SIS651 mATX (SYNTAX...

Not finding what you are looking for?
Albatron PM266A Pro (PM266APROBULK) Motherboard Logo

310 people viewed this question

Ask a Question

Usually answered in minutes!

Top Albatron Motherboards Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Mark Taylor
Mark Taylor

Level 3 Expert

728 Answers

SirEbrum

Level 2 Expert

50 Answers

Are you an Albatron Motherboard Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...