Question about Bowflex Treadmill Series 7

Open Question

Sears FreeSpirit Tread mill Starts and Stops, changes speed.

No heating of the motor,I can start repeatedly, but it won't run continuously,or at the set speed.
The display board does shows only the speed(settings) selected even when the m/c increases or decreases speed or stops.
model-C249306860
The m/c is about 5 years old but rarely used.

Posted by on

  • Anonymous Apr 28, 2009

    Same problem.......motor tries to go but stops......

×

2 Suggested Answers

  • 1 Answer

SOURCE: Online Manuals for Freespirit treadmill (Sears)

You want to charge me for support that couldnt fix my problem, now you want to charge me more and probably wont be able to fix my problem. Yes my problem was fixed. www.justanswer.com. Check them out. Later

Posted on Apr 10, 2009

  • 4 Answers

SOURCE: My Freespirit also stops after a few minutes

Normally all these problems are in relation with motor itself, I mean, internal bearings, short circuit. So if your treadmill stops is bacause the circuit board detetecs an over current fron motor.

I hope help you

Posted on Nov 05, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Tread mill display start and work stop and E03


You have to check whether the Motor runs before its shows the Error E#. If so you have to check the speed sensor. Can be it displaced or faulty. You will find the speed sensor near the motor pulley.
If you wish to get some details about treadmill repair ; check the site linked here. Pull up older posts.
http://electro-medical.blogspot.com/

Jun 22, 2016 | Treadmills

1 Answer

EPIC 400 tread mill starts but slows down &blows breaker moter run fine with no load belt backed off re set speed sensor changed power cord pluged .in to circit board ran fine for 2 hrs then stoped


motor brushes are bad. when they wear out, the motor loses torque and draws more amps. they can be replaced fairly easily once you get the motors out.

Oct 03, 2015 | Epic 400 Mx Treadmill

2 Answers

My matrix MX-T5x start running and stop in seconds. With the error code E7. What is the problem ?


Hi,
By E7 it means Speed sensor feedback missing. You have to check the speed sensor mounted near the motor pully. Remove the speed sensor and clean it well Then refix it then check the tread mill by powering ON. If then also the problem remains the same , You have to replace the speed sensor.
ok

Aug 02, 2011 | Matrix MXT5 Treadmill

1 Answer

When Iam walking on my treadmill it will change to a very fast speed


hi,
check the speed sensor in ur tread mill. may be it has become dirty. clean it and refix it. u can find out the speed sensor near the motor pulley.
ok

Dec 30, 2010 | Sears Treadmills

1 Answer

I have a horizon fitness t51 treadmill. I weigh about 138 pounds and typically run 5 miles a day at a 2% elevation at a steady speed somewhere between 5-6 mph. It recently has developed one of two...


hi,
from ur description i think ur treadmills control module have problem. motor driving card and motor is ok. normally there are no serviceable part inside the controlling module ( user interface module). only thing can do is remove the controlling module, take out its board check all the micro switches( press button switches) replace it found faulty or not( remember to remove the power before). the refix it and the test the tread mill.
ok

Dec 26, 2010 | Horizon Fitness Horizon Motor T51...

1 Answer

When the tread mill is running at a set speed, it for no appearant reason speeds up super fast with no one touching any button?


The motor controller controls the speed of the motor. This part usually work or dont work but I have seen a few instances where it was just going bad.

Jun 05, 2009 | Weslo Cadence 60 SE Treadmill

Not finding what you are looking for?
Bowflex Treadmill Series 7 Logo

Related Topics:

379 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bowflex Treadmills Experts

Electro Med Services...
Electro Med Services...

Level 3 Expert

5653 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

ptpumpman

Level 3 Expert

406 Answers

Are you a Bowflex Treadmill Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...